jnxSoamDmCfgInterFrameDelayVariationSelectionOffset
JUNIPER-SOAM-PM-MIB ·
.1.3.6.1.4.1.2636.3.78.1.3.1.1.18
Object
column
Unsigned32
This object specifies the selection offset for
Inter-Frame Delay Variation measurements. If this value
is set to n, then the IFDV is calculated by taking the
difference in frame delay between frame F and frame (F+n).
This object can only be written at row creation time and cannot be
modified once it has been created.
Context
- MIB
- JUNIPER-SOAM-PM-MIB
- OID
.1.3.6.1.4.1.2636.3.78.1.3.1.1.18- Type
- column
- Access
- readonly
- Status
- current
- Parent
- jnxSoamDmCfgEntry
- Table
- jnxSoamDmCfgTable
- Siblings
- 33
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 1-100
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxSoamDmCfgIndex An index to the Delay Measurement Configuration table which indicates
the specific measurement session for the MEP.
jnxSoamPmMepOperNextIndex needs to be inspected … | column | Unsigned32 | .1.3.6.1.4.1.2636.3.78.1.3.1.1.1 |
| jnxSoamDmCfgTestTlvIncluded Indicates whether a Test TLV or Data TLV is included when the size
of the DM frame is determined by the jnxSoamDmFrameSize object.
A value of 'true' indicates that the Test TLV is… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.78.1.3.1.1.10 |
| jnxSoamDmCfgTestTlvPattern This object specifies the type of test pattern to be
sent in the DM frame Test TLV when the size
of DM PDU is determined by the jnxSoamDmFrameSize object and
jnxSoamDmTestTlvInclu… | column | JnxSoamTcTestPatternType | .1.3.6.1.4.1.2636.3.78.1.3.1.1.11 |
| jnxSoamDmCfgNumIntervalsStored This object specifies the number of completed Measurement Intervals
to store in the history statistic table.
At least 32 completed Measurement Intervals are to be s… | column | Unsigned32 | .1.3.6.1.4.1.2636.3.78.1.3.1.1.12 |
| jnxSoamDmCfgDestMepId The Maintenance Association End Point Identifier of
another MEP in the same Maintenance Association to which
the SOAM DM frame is to be sent.
This address will be u… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.2636.3.78.1.3.1.1.13 |
| jnxSoamDmCfgDestIsMepId A value of 'true' indicates that MEPID of the target MEP is used for
SOAM DM frame transmission.
A value of 'false' indicates that the destination MAC address of th… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.78.1.3.1.1.14 |
| jnxSoamDmCfgStartTimeType This object specifies the type of start time of the SOAM DM
session. The start time can be disabled (none), immediate, relative,
or fixed.
The value of 'none' is i… | column | JnxSoamTcOperationTimeType | .1.3.6.1.4.1.2636.3.78.1.3.1.1.15 |
| jnxSoamDmCfgRepetitionTime This object specifies a configurable repetition time between
Measurement Intervals in a Delay Measurement session in seconds.
If the value is 0 (none), there is no … | column | seconds Unsigned32 | .1.3.6.1.4.1.2636.3.78.1.3.1.1.16 |
| jnxSoamDmCfgAlignMeasurementIntervals This object specifies whether the Measurement Intervals for
the Delay Measurement session are aligned with a zero offset to
real time.
The value 'true' indicates th… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.78.1.3.1.1.17 |
| jnxSoamDmCfgSessionType This object indicates whether the current session is defined to
be 'Proactive' or 'On-Demand'. A value of 'proactive'
indicates the current session is 'Proactive'. A value of 'onD… | column | OctetString | .1.3.6.1.4.1.2636.3.78.1.3.1.1.19 |
| jnxSoamDmCfgType This object indicates what type of Delay Measurement is to
be performed.
dmDmm(1) DMM SOAM PDU generated, DMR responses received
(one-way or two-way measurements)
d… | column | Enumeration | .1.3.6.1.4.1.2636.3.78.1.3.1.1.2 |
| jnxSoamDmCfgSessionStatus This object indicates the current status of the DM session. A value
of 'active' indicates the current DM session is active, i.e. the current
time lies between the start time and t… | column | OctetString | .1.3.6.1.4.1.2636.3.78.1.3.1.1.20 |
| jnxSoamDmCfgHistoryClear This object when written clears the Delay Measurement history
tables (jnxSoamDmHistoryStatsTable)
- all rows are deleted. When read the value always returns 'false'.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.78.1.3.1.1.21 |
| jnxSoamDmCfgRowStatus The status of the row.
The writable columns in a row cannot be changed if the row
is active, except for jnxSoamDmCfgEnabled and jnxSoamDmCfgHistoryClear
objects. Al… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2636.3.78.1.3.1.1.22 |
| jnxSoamDmCfgMeasurementInterval This object specifies a Measurement Interval in minutes.
A Measurement Interval 15 minutes needs to be supported, other intervals
may be supported.
T… | column | minutes Unsigned32 | .1.3.6.1.4.1.2636.3.78.1.3.1.1.23 |
| jnxSoamDmCfgDestMacAddress The Target or Destination MAC Address Field to be transmitted.
If mefSoamDmCfgType is 'dmDmm', the destination address is to be the
unicast address of the destinati… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2636.3.78.1.3.1.1.24 |
| jnxSoamDmCfgSourceMacAddress The Source MAC Address Field of the received SOAM DM session PDUs.
If mefSoamDmCfgType is dm1DmRx this object indicates the source
address of the dm1DmTx DM session… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2636.3.78.1.3.1.1.25 |
| jnxSoamDmCfgFixedStartDateAndTime This object specifies the fixed start date/time for the
SOAM Delay Measurement session. This object is used only used if
mefSoamDmStartTimeType is 'fixed' and is ignored otherwise… | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2636.3.78.1.3.1.1.26 |
| jnxSoamDmCfgRelativeStartTime This object specifies the relative start time, from
the current system time, for the SOAM DM session. This
object is used only if mefSoamDmStartTimeType is 'relative'
and is ignor… | column | SNMPv2-TCTimeInterval | .1.3.6.1.4.1.2636.3.78.1.3.1.1.27 |
| jnxSoamDmCfgStopTimeType This object specifies the type of stop time to terminate the
SOAM DM session. The stop time can be forever (none), relative, or
fixed.
The value of 'none' indicates… | column | JnxSoamTcOperationTimeType | .1.3.6.1.4.1.2636.3.78.1.3.1.1.28 |
| jnxSoamDmCfgFixedStopDateAndTime This object specifies the fixed stop date/time for the
SOAM Delay Measurement session. This object is used only used
if mefSoamDmStopTimeType is 'fixed' and is ignored otherwise.
… | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2636.3.78.1.3.1.1.29 |
| jnxSoamDmCfgVersion This object indicates the version of the PDUs used to perform
Delay Measurement.
Version 0 indicates the PDU formats defined in Y.1731-2008.
Version 1 indicates the… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.78.1.3.1.1.3 |
| jnxSoamDmCfgRelativeStopTime This object specifies the relative stop time, from the
session start time, to stop the SOAM DM session. This
object is used only if mefSoamDmStopTimeType is 'relative' and is
othe… | column | SNMPv2-TCTimeInterval | .1.3.6.1.4.1.2636.3.78.1.3.1.1.30 |
| jnxSoamDmCfgAlignMeasurementOffset This object specifies the offset in minutes from the time of day value
if mefSoamDmCfgAlignMeasurementIntervals is 'true' and the repetition
time is a factor of 60 minutes. If not… | column | minutes Unsigned32 | .1.3.6.1.4.1.2636.3.78.1.3.1.1.31 |
| jnxSoamDmCfgNumMeasBinsPerFrameDelayInterval This object specifies the number of measurement bins
per Measurement Interval for Frame Delay measurements.
At least 3 bins are to be supported; at least 10 bins ar… | column | Unsigned32 | .1.3.6.1.4.1.2636.3.78.1.3.1.1.32 |
| jnxSoamDmCfgNumMeasBinsPerInterFrameDelayVariationInterval This object specifies the number of measurement bins
per Measurement Interval for Inter-Frame Delay Variation
measurements.
The minimum number of measurement bins t… | column | Unsigned32 | .1.3.6.1.4.1.2636.3.78.1.3.1.1.33 |
| jnxSoamDmCfgNumMeasBinsPerFrameDelayRangeInterval This object specifies the number of measurement bins
per Measurement Interval for Frame Delay Range measurements.
At least 2 bins are to be supported; at least 10 b… | column | Unsigned32 | .1.3.6.1.4.1.2636.3.78.1.3.1.1.34 |
| jnxSoamDmCfgEnabled This object specifies whether the Delay Measurement session is
enabled.
The value 'true' indicates the Delay Measurement session is enabled AND
SOAM PDUs are sent a… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.78.1.3.1.1.4 |
| jnxSoamDmCfgMeasurementEnable A vector of bits that indicates the type of SOAM DM counters that
are enabled.
A bit set to '1' enables the specific SOAM DM counter.
A bit set to '0… | column | Bits | .1.3.6.1.4.1.2636.3.78.1.3.1.1.5 |
| jnxSoamDmCfgMessagePeriod This object specifies the interval between Delay Measurement
OAM message transmission. For Delay Measurement monitoring
applications, the default value is 100ms.
Th… | column | ms SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.78.1.3.1.1.6 |
| jnxSoamDmCfgPriority This object specifies the priority of frames with
Delay Measurement OAM message information.
The default value is to be the value which yields the lowest frame
loss… | column | IEEE8021-TC-MIBIEEE8021PriorityValue | .1.3.6.1.4.1.2636.3.78.1.3.1.1.7 |
| jnxSoamDmCfgFrameSize This object specifies the Delay Measurement frame size between
64 bytes and the maximum transmission unit of the EVC.
The range of frame sizes from 64 through 2000 … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.78.1.3.1.1.8 |
| jnxSoamDmCfgDataPattern This object specifies the DM data pattern included in a Data TLV
when the size of the DM frame is determined by the
jnxSoamDmFrameSize object and jnxSoamDmTestTlvIncluded is 'fals… | column | JnxSoamTcDataPatternType | .1.3.6.1.4.1.2636.3.78.1.3.1.1.9 |