jnxIfOtnOTUkCfgContainerIndex
JUNIPER-IFOTN-MIB ·
.1.3.6.1.4.1.2636.3.70.1.1.2.1.1
Object
column
Integer32
The associated jnxContentsContainerIndex - eg shelf.
Context
- MIB
- JUNIPER-IFOTN-MIB
- OID
.1.3.6.1.4.1.2636.3.70.1.1.2.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- jnxIfOtnOTUkCfgEntry
- Table
- jnxIfOtnOTUkCfgTable
- Siblings
- 22
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-1024
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxIfOtnOTUkPreFecBERThresholdExponent This will set the BER threshold(exponent), which when
crossed will trigger Signal Degrade. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.70.1.1.2.1.10 |
| jnxIfOtnOTUkPreFecBERThresholdTime The collection times (1ms - 1sec) to calculate the BER. | column | ms SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.70.1.1.2.1.11 |
| jnxIfOtnOTUkTIMActEnabled Indicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled.
The default value of this object is false(2). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.70.1.1.2.1.12 |
| jnxIfOtnOTUkTxTTI The Trace TTI SAPI 0..15, DAPI 16..31
32 ..63 user defined | column | OctetString | .1.3.6.1.4.1.2636.3.70.1.1.2.1.13 |
| jnxIfOtnOTUkRxTTI The Receive Trace TTI SAPI 0..15, DAPI 16..31
32 ..63 user defined | column | OctetString | .1.3.6.1.4.1.2636.3.70.1.1.2.1.14 |
| jnxIfOtnOTUkExpectedRxSapi Expected receive SAPI. | column | OctetString | .1.3.6.1.4.1.2636.3.70.1.1.2.1.15 |
| jnxIfOtnOTUkExpectedRxDapi Expected receive DAPI. | column | OctetString | .1.3.6.1.4.1.2636.3.70.1.1.2.1.16 |
| jnxIfOtnOTUkStatus The interface status at the OTUk layer. | column | Bits | .1.3.6.1.4.1.2636.3.70.1.1.2.1.17 |
| jnxIfOtnOTUkPreFecBERThresholdClearMantissa This will set the BER threshold(mantissa) for clear signal
degrade condition, which signal degrade condition will be
cleared when Pre-Fec error count is below the clear
threshold … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.70.1.1.2.1.18 |
| jnxIfOtnOTUkPreFecBERThresholdClearExponent This will set the BER threshold(exponent) for clear signal
degrade condition, which signal degrade condition will be
cleared when Pre-Fec error count is below the clear threshold
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.70.1.1.2.1.19 |
| jnxIfOtnOTUkCfgL1Index The level one index associated with this subject ... eg fpc
slot. | column | Integer32 | .1.3.6.1.4.1.2636.3.70.1.1.2.1.2 |
| jnxIfOtnOTUkTxSapiTTIFstByteNul This will fill the first byte of TTI with all zero
as per the G.709 recommendation. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.70.1.1.2.1.20 |
| jnxIfOtnOTUkTxDapiTTIFstByteNul This will fill the first byte of TTI with all zero
as per the G.709 recommendation. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.70.1.1.2.1.21 |
| jnxIfOtnOTUkExpectedRxSapiFstByteNul This will fill the first byte of TTI with all zero
as per the G.709 recommendation. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.70.1.1.2.1.22 |
| jnxIfOtnOTUkExpectedRxDapiFstByteNul This will fill the first byte of TTI with all zero
as per the G.709 recommendation. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.70.1.1.2.1.23 |
| jnxIfOtnOTUkCfgL2Index The level two index associated with this subject .. eg pic
slot. | column | Integer32 | .1.3.6.1.4.1.2636.3.70.1.1.2.1.3 |
| jnxIfOtnOTUkCfgL3Index The level three index associated with this subject..
eg port. | column | Integer32 | .1.3.6.1.4.1.2636.3.70.1.1.2.1.4 |
| jnxIfOtnOTUkCfgRate This is the rate for the interface and the rates depend
on the interface/fru type. | column | JnxIfOtnRate | .1.3.6.1.4.1.2636.3.70.1.1.2.1.5 |
| jnxIfOtnOTUkCfgFecMode This is the Fec type in the OTU frame and the selection
depends on the interface/fru type. | column | JnxIfOtnFecType | .1.3.6.1.4.1.2636.3.70.1.1.2.1.6 |
| jnxIfOtnOTUkEnableAutoFrrByteInsert This will enable/disable the automatic insertion of
the frr SF/SD byte in the overhead bytes(RES) | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.70.1.1.2.1.7 |
| jnxIfOtnOTUkEnableBERFrrSupport This will enable/disable the FRR support for BER | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.70.1.1.2.1.8 |
| jnxIfOtnOTUkPreFecBERThresholdMantissa This will set the BER threshold(mantissa), which when
crossed will trigger Signal Degrade. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.70.1.1.2.1.9 |