jnxIfOtnOCh2OTUkPreFecBERThMant
JUNIPER-IFOTN-MIB ·
.1.3.6.1.4.1.2636.3.70.1.2.2.1.10
Object
This will set the BER threshold(mantissa), which when crossed will trigger Signal Degrade.
Context
- MIB
- JUNIPER-IFOTN-MIB
- OID
.1.3.6.1.4.1.2636.3.70.1.2.2.1.10- Type
- column
- Access
- readwrite
- Status
- obsolete
- Parent
- jnxIfOtnOCh2OTUkCfgEntry
- Table
- jnxIfOtnOCh2OTUkCfgTable
- Siblings
- 19
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxIfOtnOCh2OTUkCfgContIndx obsolete Container Index associated with the object instance. | column | Integer32 | .1.3.6.1.4.1.2636.3.70.1.2.2.1.1 |
| jnxIfOtnOCh2OTUkPreFecBERThExpo obsolete This will set the BER threshold(exponent), which when
crossed will trigger Signal Degrade. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.70.1.2.2.1.11 |
| jnxIfOtnOCh2OTUkPreFecBERThTime obsolete The collection times (1ms - 1sec) to calculate the BER. | column | ms SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.70.1.2.2.1.12 |
| jnxIfOtnOCh2OTUkTIMActEnabled obsolete Indicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled.
The default value of this object is false(2). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.70.1.2.2.1.13 |
| jnxIfOtnOCh2OTUkTxTTI obsolete The Trace TTI SAPI 0..15, DAPI 16..31
32 ..63 user defined | column | OctetString | .1.3.6.1.4.1.2636.3.70.1.2.2.1.14 |
| jnxIfOtnOCh2OTUkRxTTI obsolete The Receive Trace TTI SAPI 0..15, DAPI 16..31
32 ..63 user defined | column | OctetString | .1.3.6.1.4.1.2636.3.70.1.2.2.1.15 |
| jnxIfOtnOCh2OTUkExpectedRxSapi obsolete Expected receive SAPI. | column | OctetString | .1.3.6.1.4.1.2636.3.70.1.2.2.1.16 |
| jnxIfOtnOCh2OTUkExpectedRxDapi obsolete Expected receive DAPI. | column | OctetString | .1.3.6.1.4.1.2636.3.70.1.2.2.1.17 |
| jnxIfOtnOCh2OTUkStatus obsolete The interface status at the OTUk layer. | column | Bits | .1.3.6.1.4.1.2636.3.70.1.2.2.1.18 |
| jnxIfOtnOCh2OTUkPreFecBERThClrMn obsolete This will set the BER threshold(mantissa) for clear signal
degrade condition, which signal degrade condition will be
cleared when Pre-Fec error count is below the clear
threshold … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.70.1.2.2.1.19 |
| jnxIfOtnOCh2OTUkCfgL1Index obsolete FPC slot number of the interface. | column | Integer32 | .1.3.6.1.4.1.2636.3.70.1.2.2.1.2 |
| jnxIfOtnOCh2OTUkPreFecBERThClrEx obsolete This will set the BER threshold(exponent) for clear signal
degrade condition, which signal degrade condition will be
cleared when Pre-Fec error count is below the clear threshold
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.70.1.2.2.1.20 |
| jnxIfOtnOCh2OTUkCfgL2Index obsolete PIC slot number of the interface. | column | Integer32 | .1.3.6.1.4.1.2636.3.70.1.2.2.1.3 |
| jnxIfOtnOCh2OTUkCfgL3Index obsolete Port number of the interface. | column | Integer32 | .1.3.6.1.4.1.2636.3.70.1.2.2.1.4 |
| jnxIfOtnOCh2OTUkCfgL4Index obsolete Port number of the interface. | column | Integer32 | .1.3.6.1.4.1.2636.3.70.1.2.2.1.5 |
| jnxIfOtnOCh2OTUkCfgRate obsolete This is the rate for the interface and the rates depend
on the interface/fru type. | column | JnxIfOtnRate | .1.3.6.1.4.1.2636.3.70.1.2.2.1.6 |
| jnxIfOtnOCh2OTUkCfgFecMode obsolete This is the Fec type in the OTU frame and the selection
depends on the interface/fru type. | column | JnxIfOtnFecType | .1.3.6.1.4.1.2636.3.70.1.2.2.1.7 |
| jnxIfOtnOCh2OTUkEnAutoFrrByteIns obsolete This will enable/disable the automatic insertion of
the frr SF/SD byte in the overhead bytes(RES) | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.70.1.2.2.1.8 |
| jnxIfOtnOCh2OTUkEnBERFrrSupport obsolete This will enable/disable the FRR support for BER | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.70.1.2.2.1.9 |