jnxIfOtnNotificationTrigSeverity
JUNIPER-IFOTN-MIB ·
.1.3.6.1.4.1.2636.3.70.1.1.9.1.8
Object
column
r/w
JnxIfOtnSeverity
This will be the Severity of the Notification for that layer.
Context
- MIB
- JUNIPER-IFOTN-MIB
- OID
.1.3.6.1.4.1.2636.3.70.1.1.9.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- jnxIfOtnNotificationTrigEntry
- Table
- jnxIfOtnNotificationTrigTable
- Siblings
- 11
Syntax
JnxIfOtnSeverity
- Source
- JnxIfOtnSeverity
- Base type
Enumeration
Values & Constraints
Type Values
1 | jnxCritical |
2 | jnxMajor |
3 | jnxMinor |
4 | jnxInfo |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxIfOtnNotificationTrigContainerIndex The associated jnxContentsContainerIndex - eg shelf. | column | Integer32 | .1.3.6.1.4.1.2636.3.70.1.1.9.1.1 |
| jnxIfOtnNotificationTrigHoldtimeUp This object will indicate the time (ms) for the defect to
persist before it is declared an alarm. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.70.1.1.9.1.10 |
| jnxIfOtnNotificationTrigHoldtimeDown This object will indicate the time (ms) for the defect is
absent before the alarm is cleared. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.70.1.1.9.1.11 |
| jnxIfOtnTrigServiceStateAction This will indicate whether this alarm is service affecting
or not . | column | JnxIfOtnServiceStateAction | .1.3.6.1.4.1.2636.3.70.1.1.9.1.12 |
| jnxIfOtnNotificationTrigL1Index The level one index associated with this subject ... eg fpc
slot. | column | Integer32 | .1.3.6.1.4.1.2636.3.70.1.1.9.1.2 |
| jnxIfOtnNotificationTrigL2Index The level two index associated with this subject .. eg pic
slot. | column | Integer32 | .1.3.6.1.4.1.2636.3.70.1.1.9.1.3 |
| jnxIfOtnNotificationTrigL3Index The level three index associated with this subject..
eg port. | column | Integer32 | .1.3.6.1.4.1.2636.3.70.1.1.9.1.4 |
| jnxIfOtnNotificationTrigLayer The layer OTU/ODU/TCM layer for the alarm | column | JnxIfOtnLayer | .1.3.6.1.4.1.2636.3.70.1.1.9.1.5 |
| jnxIfOtnNotificationTrigTCMLevel For OCh/OTUk/ODUk will be this will be 0
If layer is TCM then this will give the TCM
level 1..6. | column | Integer32 | .1.3.6.1.4.1.2636.3.70.1.1.9.1.6 |
| jnxIfOtnNotificationTrigAlmId This will be the ID of Alarm for that layer
'JnxoptIfOTNOChAlarms'/'JnxoptIfOTNODUkTcmAlarms'. | column | Integer32 | .1.3.6.1.4.1.2636.3.70.1.1.9.1.7 |
| jnxIfOtnNotificationTrigIgnore This object will ignore the alarm when set. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.70.1.1.9.1.9 |