jnxPMCurAvgModulatorBiasXQ
JUNIPER-IFOPTICS-MIB ·
.1.3.6.1.4.1.2636.3.71.1.2.1.1.110
Object
Average Modulator Bias XQ
Context
- MIB
- JUNIPER-IFOPTICS-MIB
- OID
.1.3.6.1.4.1.2636.3.71.1.2.1.1.110- Type
- column
- Access
- readonly
- Status
- current
- Units
- 0.01 %
- Parent
- jnxOpticsPMCurrentEntry
- Table
- jnxOpticsPMCurrentTable
- Siblings
- 129
Syntax
0.01 % SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxPMCurChromaticDispersion Chromatic Dispersion measured at Rx Transceiver
port | column | ps/nm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.1 |
| jnxPMCurMaxChromaticDispersion Max Chromatic Dispersion measured at Rx Transceiver
port | column | ps/nm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.10 |
| jnxPMCurMinSOPROC Minimum SOPROC - State of Polarisation Rate of Change | column | krad/s SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.100 |
| jnxPMCurMaxSOPROC Maximum SOPROC - State of Polarisation Rate of Change | column | krad/s SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.101 |
| jnxPMCurAvgSOPROC Average SOPROC - State of Polarisation Rate of Change | column | krad/s SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.102 |
| jnxPMCurModulatorBiasXI Modulator Bias XI | column | 0.01 % SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.103 |
| jnxPMCurMinModulatorBiasXI Minimum Modulator Bias XI | column | 0.01 % SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.104 |
| jnxPMCurMaxModulatorBiasXI Maximum Modulator Bias XI | column | 0.01 % SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.105 |
| jnxPMCurAvgModulatorBiasXI Average Modulator Bias XI | column | 0.01 % SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.106 |
| jnxPMCurModulatorBiasXQ Modulator Bias XQ | column | 0.01 % SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.107 |
| jnxPMCurMinModulatorBiasXQ Minimum Modulator Bias XQ | column | 0.01 % SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.108 |
| jnxPMCurMaxModulatorBiasXQ Maximum Modulator Bias XQ | column | 0.01 % SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.109 |
| jnxPMCurAvgChromaticDispersion Average Chromatic Dispersion measured at Rx Transceiver
port | column | ps/nm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.11 |
| jnxPMCurModulatorBiasYI Modulator Bias YI | column | 0.01 % SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.111 |
| jnxPMCurMinModulatorBiasYI Minimum Modulator Bias YI | column | 0.01 % SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.112 |
| jnxPMCurMaxModulatorBiasYI Maximum Modulator Bias YI | column | 0.01 % SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.113 |
| jnxPMCurAvgModulatorBiasYI Average Modulator Bias YI | column | 0.01 % SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.114 |
| jnxPMCurModulatorBiasYQ Modulator Bias YQ | column | 0.01 % SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.115 |
| jnxPMCurMinModulatorBiasYQ Minimum Modulator Bias YQ | column | 0.01 % SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.116 |
| jnxPMCurMaxModulatorBiasYQ Maximum Modulator Bias YQ | column | 0.01 % SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.117 |
| jnxPMCurAvgModulatorBiasYQ Average Modulator Bias YQ | column | 0.01 % SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.118 |
| jnxPMCurModulatorBiasXPhase Modulator Bias XPhase | column | 0.01 % SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.119 |
| jnxPMCurMinDiffGroupDelay Min Differential group delay | column | ps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.12 |
| jnxPMCurMinModulatorBiasXPhase Minimum Modulator Bias XPhase | column | 0.01 % SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.120 |
| jnxPMCurMaxModulatorBiasXPhase Maximum Modulator Bias XPhase | column | 0.01 % SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.121 |
| jnxPMCurAvgModulatorBiasXPhase Average Modulator Bias XPhase | column | 0.01 % SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.122 |
| jnxPMCurModulatorBiasYPhase Modulator Bias YPhase | column | 0.01 % SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.123 |
| jnxPMCurMinModulatorBiasYPhase Minimum Modulator Bias YPhase | column | 0.01 % SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.124 |
| jnxPMCurMaxModulatorBiasYPhase Maximum Modulator Bias YPhase | column | 0.01 % SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.125 |
| jnxPMCurAvgModulatorBiasYPhase Average Modulator Bias YPhase | column | 0.01 % SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.126 |
| jnxPMCurQMargin Q Margin | column | 0.1 db SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.127 |
| jnxPMCurMinQMargin Minimum Q Margin | column | 0.1 db SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.128 |
| jnxPMCurMaxQMargin Maximum Q Margin | column | 0.1 db SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.129 |
| jnxPMCurMaxDiffGroupDelay Max Differential group delay | column | ps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.13 |
| jnxPMCurAvgQMargin Average Q Margin | column | 0.1 db SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.130 |
| jnxPMCurAvgDiffGroupDelay Average Differential group delay | column | ps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.14 |
| jnxPMCurMinPolarState Min Polarization state | column | rad/s SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.15 |
| jnxPMCurMaxPolarState Max Polarization state | column | rad/s SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.16 |
| jnxPMCurAvgPolarState Avg Polarization state | column | rad/s SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.17 |
| jnxPMCurMinPolarDepLoss Min - The polarisation dependent loss (PDL) | column | 0.1 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.18 |
| jnxPMCurMaxPolarDepLoss Max - The polarisation dependent loss (PDL) | column | 0.1 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.19 |
| jnxPMCurDiffGroupDelay Differential group delay | column | ps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.2 |
| jnxPMCurAvgPolarDepLoss Avg - The polarisation dependent loss (PDL) | column | 0.1 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.20 |
| jnxPMCurMinQ Min 'Q' factor estimated at Rx Transceiver port | column | 0.1 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.21 |
| jnxPMCurMaxQ Max 'Q' factor estimated at Rx Transceiver port | column | 0.1 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.22 |
| jnxPMCurAvgQ Avg 'Q' factor estimated at Rx Transceiver port | column | 0.1 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.23 |
| jnxPMCurMinSNR Min SNR - signal to noise ratio | column | 0.1 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.24 |
| jnxPMCurMaxSNR Max SNR - signal to noise ratio | column | 0.1 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.25 |
| jnxPMCurAvgSNR Avg SNR - signal to noise ratio | column | 0.1 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.26 |
| jnxPMCurMinTxOutputPower Min TxOutputPower - transmit output power | column | 0.01 dbm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.27 |
| jnxPMCurMaxTxOutputPower Max TxOutputPower - transmit output power | column | 0.01 dbm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.28 |
| jnxPMCurAvgTxOutputPower Avg TxOutputPower - transmit output power | column | 0.01 dbm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.29 |
| jnxPMCurPolarizationState Polarization state | column | rad/s SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.3 |
| jnxPMCurMinRxInputPower Min RxInputPower - receive output power | column | 0.01 dbm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.30 |
| jnxPMCurMaxRxInputPower Max RxInputPower - receive output power | column | 0.01 dbm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.31 |
| jnxPMCurAvgRxInputPower Avg RxInputPower - receive output power | column | 0.01 dbm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.32 |
| jnxPMCurSuspectedFlag If true, the data in this entry may be unreliable. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.71.1.2.1.1.33 |
| jnxPMCurSuspectReason If SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - interface disabled
4 - clock shift detected
5 - cleared by use… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.34 |
| jnxPMCurTxLaserBiasCurrent Trasmit LaserBiasCurrent measured at Transceiver port | column | .1 mA SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.35 |
| jnxPMCurMinTxLaserBiasCurrent Minimum trasmit LaserBiasCurrent measured at Transceiver port | column | .1 mA SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.36 |
| jnxPMCurMaxTxLaserBiasCurrent Maximum trasmit LaserBiasCurrent measured at Transceiver port | column | .1 mA SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.37 |
| jnxPMCurAvgTxLaserBiasCurrent Average LaserBiasCurrent measured at Transceiver port | column | .1 mA SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.38 |
| jnxPMCurTemperature Module Temperature | column | .1 Celcius SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.39 |
| jnxPMCurPolarDepLoss The polarisation dependent loss (PDL) is the difference (in dB)
between the maximum and minimum values of the channel insertion
loss (or gain) of the black-link from point SS to R… | column | 0.1 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.4 |
| jnxPMCurMinTemperature Minimum Module Temperature | column | .1 Celcius SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.40 |
| jnxPMCurMaxTemperature Maximum Module Temperature | column | .1 Celcius SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.41 |
| jnxPMCurAvgTemperature Average Module Temperature | column | .1 Celcius SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.42 |
| jnxPMCurCarFreqOffset Carrier frequency offset measured at Transceiver port | column | MHz SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.43 |
| jnxPMCurMinCarFreqOffset Minimum Carrier frequency offset measured at Transceiver port | column | MHz SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.44 |
| jnxPMCurMaxCarFreqOffset Maximum Carrier frequency offset measured at Transceiver port | column | MHz SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.45 |
| jnxPMCurAvgCarFreqOffset Average Carrier frequency offset measured at Transceiver port | column | MHz SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.46 |
| jnxPMCurRxLaserBiasCurrent Received LaserBiasCurrent measured at Transceiver port | column | .1 mA SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.47 |
| jnxPMCurMinRxLaserBiasCurrent Received Minimum LaserBiasCurrent measured at Transceiver port | column | .1 mA SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.48 |
| jnxPMCurMaxRxLaserBiasCurrent Received Maximum LaserBiasCurrent measured at Transceiver port | column | .1 mA SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.49 |
| jnxPMCurQ 'Q' factor estimated at Rx Transceiver port | column | 0.1 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.5 |
| jnxPMCurAvgRxLaserBiasCurrent Received Average LaserBiasCurrent measured at Transceiver port | column | .1 mA SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.50 |
| jnxPMCurTecCurrent Received TecCurrent measured at Transceiver port | column | .1 mA SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.51 |
| jnxPMCurMinTecCurrent Received Minimum TecCurrent measured at Transceiver port | column | .1 mA SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.52 |
| jnxPMCurMaxTecCurrent Received Maximum TecCurrent measured at Transceiver port | column | .1 mA SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.53 |
| jnxPMCurAvgTecCurrent Received Average TecCurrent measured at Transceiver port | column | .1 mA SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.54 |
| jnxPMCurResidualDispersion Residual Dispersion measured at Transceiver
port | column | .1 ps/nm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.55 |
| jnxPMCurMinResidualDispersion Minimum Residual Dispersion measured at Transceiver
port | column | .1 ps/nm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.56 |
| jnxPMCurMaxResidualDispersion Maximum Residual Dispersion measured at Transceiver
port | column | .1 ps/nm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.57 |
| jnxPMCurAvgResidualDispersion Average Residual Dispersion measured at Transceiver
port | column | .1 ps/nm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.58 |
| jnxPMCurLevelHistogram The rate of measured signal at Transceiver port | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.59 |
| jnxPMCurSNR SNR - signal to noise ratio | column | 0.1 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.6 |
| jnxPMCurMinLevelHistogram The Minimum rate of measured signal at Transceiver port | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.60 |
| jnxPMCurMaxLevelHistogram The Maximum rate of measured signal at Transceiver port | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.61 |
| jnxPMCurAvgLevelHistogram The Average rate of measured signal at Transceiver port | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.62 |
| jnxPMCurLaserFrequencyError Laser Frequency Error measured at Transceiver port | column | MHz SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.63 |
| jnxPMCurMinLaserFrequencyError Minimum Laser Frequency Error measured at Transceiver port | column | MHz SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.64 |
| jnxPMCurMaxLaserFrequencyError Maximum Laser Frequency Error measured at Transceiver port | column | MHz SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.65 |
| jnxPMCurAvgLaserFrequencyError Average Laser Frequency Error measured at Transceiver port | column | MHz SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.66 |
| jnxPMCurFECCorrectedErrorsMantissa Pre-FEC BER - provides the mantissa value for Pre-FEC BER expressed in scientific notation | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.67 |
| jnxPMCurFECCorrectedErrorsExponent Pre-FEC BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notation | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.68 |
| jnxPMCurMinFECCorrectedErrorsMantissa Minimum Pre-FEC BER - provides the mantissa value for Pre-FEC BER expressed in scientific notation | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.69 |
| jnxPMCurTxOutputPower TxOutputPower - transmit output power | column | 0.01 dbm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.7 |
| jnxPMCurMinFECCorrectedErrorsExponent Minimum Pre-FEC BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notation | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.70 |
| jnxPMCurMaxFECCorrectedErrorsMantissa Maximum Pre-FEC BER - provides the mantissa value for Pre-FEC BER expressed in scientific notation | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.71 |
| jnxPMCurMaxFECCorrectedErrorsExponent Maximum Pre-FEC BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notation | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.72 |
| jnxPMCurAvgFECCorrectedErrorsMantissa Average Pre-FEC BER - provides the mantissa value for Pre-FEC BER expressed in scientific notation | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.73 |
| jnxPMCurAvgFECCorrectedErrorsExponent Average Pre-FEC BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notation | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.74 |
| jnxPMCurFECUCorrectedWordsMantissa Uncorrected BER - provides the mantissa value for Uncorrected BER expressed in scientific notation | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.75 |
| jnxPMCurFECUCorrectedWordsExponent Uncorrected BER - provides the negetive exponent value for Uncorrected BER expressed in scientific notation | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.76 |
| jnxPMCurMinFECUCorrectedWordsMantissa Minimum Uncorrected BER - provides the mantissa value for Uncorrected BER expressed in scientific notation | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.77 |
| jnxPMCurMinFECUCorrectedWordsExponent Minimum Uncorrected BER - provides the negetive exponent value for Uncorrected BER expressed in scientific notation | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.78 |
| jnxPMCurMaxFECUCorrectedWordsMantissa Maximum Uncorrected BER - provides the mantissa value for Uncorrected BER expressed in scientific notation | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.79 |
| jnxPMCurRxInputPower RxInputPower - receive output power | column | 0.01 dbm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.8 |
| jnxPMCurMaxFECUCorrectedWordsExponent Maximum Uncorrected BER - provides the negetive exponent value for Uncorrected BER expressed in scientific notation | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.80 |
| jnxPMCurAvgFECUCorrectedWordsMantissa Average Uncorrected BER - provides the mantissa value for Uncorrected BER expressed in scientific notation | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.81 |
| jnxPMCurAvgFECUCorrectedWordsExponent Average Uncorrected BER - provides the negetive exponent value for Uncorrected BER expressed in scientific notation | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.82 |
| jnxPMCurRxSignalPower RxSignalPower - receive signal power | column | 0.01 dbm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.83 |
| jnxPMCurMinRxSignalPower Min RxSignalPower - receive signal power | column | 0.01 dbm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.84 |
| jnxPMCurMaxRxSignalPower Max RxSignalPower - receive signal power | column | 0.01 dbm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.85 |
| jnxPMCurAvgRxSignalPower Avg RxSignalPower - receive signal power | column | 0.01 dbm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.86 |
| jnxPMCurOSNR OSNR - optical signal to noise ratio | column | 0.1 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.87 |
| jnxPMCurMinOSNR Min OSNR - optical signal to noise ratio | column | 0.1 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.88 |
| jnxPMCurMaxOSNR Max OSNR - optical signal to noise ratio | column | 0.1 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.89 |
| jnxPMCurMinChromaticDispersion Min Chromatic Dispersion measured at Rx Transceiver
port | column | ps/nm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.9 |
| jnxPMCurAvgOSNR Avg OSNR - optical signal to noise ratio | column | 0.1 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.90 |
| jnxPMCurSOPMD SOPMD - second-order polarization mode dispersion | column | 0.1 ps^2 SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.91 |
| jnxPMCurMinSOPMD Min SOPMD - second-order polarization mode dispersion | column | 0.1 ps^2 SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.92 |
| jnxPMCurMaxSOPMD Max SOPMD - second-order polarization mode dispersion | column | 0.1 ps^2 SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.93 |
| jnxPMCurAvgSOPMD Avg SOPMD - second-order polarization mode dispersion | column | 0.1 ps^2 SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.94 |
| jnxPMCurSupplyVoltage Supply Voltage | column | 0.01 V SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.95 |
| jnxPMCurMinSupplyVoltage Minimum Supply Voltage | column | 0.01 V SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.96 |
| jnxPMCurMaxSupplyVoltage Maximum Supply Voltage | column | 0.01 V SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.97 |
| jnxPMCurAvgSupplyVoltage Average Supply Voltage | column | 0.01 V SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.98 |
| jnxPMCurSOPROC SOPROC - State of Polarisation Rate of Change | column | krad/s SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.2.1.1.99 |