ifOut1SecRate
JUNIPER-IF-MIB ·
.1.3.6.1.4.1.2636.3.3.1.1.4
Object
column
SNMPv2-SMIGauge32
The number of bits per second (bps), delivered by this (sub-)layer to its next lower (sub-)layer.
Context
- MIB
- JUNIPER-IF-MIB
- OID
.1.3.6.1.4.1.2636.3.3.1.1.4- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ifJnxEntry
- Table
- ifJnxTable
- Siblings
- 36
Syntax
SNMPv2-SMIGauge32
- Source
- SNMPv2-SMIGauge32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ifIn1SecRate The number of bits per second (bps), delivered by
this (sub-)layer to its next higher (sub-)layer. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2636.3.3.1.1.1 |
| ifJnxInFrameErrors Framing Errors: The number of input packets which were
misaligned. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.3.1.1.10 |
| ifJnxInQDrops Drops: The number of packets dropped by the input queue of
the I/O Manager ASIC. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.3.1.1.11 |
| ifJnxInRunts Runts: Frames received that are smaller than the runt
threshold. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.3.1.1.12 |
| ifJnxInGiants Giants: Frames received that are larger than the giant
threshold. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.3.1.1.13 |
| ifJnxInDiscards Policed Discards: Frames that the incoming packet match code
discarded because they were not recognized or of interest. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.3.1.1.14 |
| ifJnxInHslCrcErrors HS Link CRC Errors: The number of CRC errors on the
high-speed links between the ASICs responsible for handling
the router interfaces while receiving packets. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.3.1.1.15 |
| ifJnxInHslFifoOverFlows HS link FIFO overflows: The number of FIFO overflows on the
high-speed links between the ASICs responsible for handling
the router interfaces. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.3.1.1.16 |
| ifJnxInL3Incompletes L3 incompletes: The number of incoming packets that fail
Layer 3 sanity checks of the header. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.3.1.1.17 |
| ifJnxInL2ChanErrors L2 channel errors: the number of incoming packets for which
the sofware could not find a valid logical interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.3.1.1.18 |
| ifJnxInL2MismatchTimeouts L2 mismatch timeouts: The count of malformed or short packets
that cause the incoming packet handler to discard the frame
as unreadable. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.3.1.1.19 |
| ifIn1SecOctets The number of octets per second (Bps, Bytes per
second), delivered by this (sub-)layer to its next
higher (sub-)layer. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2636.3.3.1.1.2 |
| ifJnxInInvalidVCs Invalid VCs: Number of cells that arrived for a nonexistent
virtual circuit. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.3.1.1.20 |
| ifJnxInFifoErrors FIFO errors: The number of FIFO errors in the receive
direction as reported by the ASIC on the PIC. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2636.3.3.1.1.21 |
| ifJnxBucketDrops Bucket drops: Drops due to traffic load exceeding the
interface transmit/receive leaky bucket configuration. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.3.1.1.22 |
| ifJnxSramErrors SRAM errors: This counter increments when a hardware error
has occurred in the SRAM on the PIC. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2636.3.3.1.1.23 |
| ifJnxOutErrors Errors: The sum of the outgoing frame aborts and FCS errors. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.3.1.1.24 |
| ifJnxCollisions Collisions: The number of output collisions detected on this
interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.3.1.1.25 |
| ifJnxCarrierTrans Carrier transitions: The number of times the interface saw
the carrier signal transition. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.3.1.1.26 |
| ifJnxOutQDrops Drops: The number of packets dropped by the output queue of
the I/O Manager ASIC. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.3.1.1.27 |
| ifJnxOutAgedErrors Aged packets: The number of packets that remained in shared
packet SDRAM for so long that the system automatically purged
them. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.3.1.1.28 |
| ifJnxOutFifoErrors FIFO errors: The number of FIFO errors in the transmit
direction as reported by the ASIC on the PIC. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2636.3.3.1.1.29 |
| ifIn1SecPkts The number of packets per second (pps), delivered
by this (sub-)layer to its next higher (sub-)layer. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2636.3.3.1.1.3 |
| ifJnxOutHslFifoUnderFlows HS link FIFO underflows: The number of FIFO underflows on the
high-speed links between the ASICs responsible for handling
the router interfaces. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.3.1.1.30 |
| ifJnxOutHslCrcErrors HS Link CRC Errors: The number of CRC errors on the
high-speed links between the ASICs responsible for handling
the router interfaces while transmitting packets. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2636.3.3.1.1.31 |
| ifJnxCrcErrors CRC Errors: The number of CRC errors | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.3.1.1.32 |
| ifJnxFcsErrors FCS Errors: The number of FCS errors | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.3.1.1.33 |
| ifHCIn1SecOctets The number of bytes per second (Bps), delivered by
this (sub-)layer to its next higher (sub-)layer.
This object is a 64 bit version of ifIn1SecOctets. | column | HCNUM-TCCounterBasedGauge64 | .1.3.6.1.4.1.2636.3.3.1.1.34 |
| ifHCOut1SecOctets The number of bytes per second (Bps), delivered by
this (sub-)layer to its next lower (sub-)layer.
This object is a 64 bit version of ifOut1SecOctets. | column | HCNUM-TCCounterBasedGauge64 | .1.3.6.1.4.1.2636.3.3.1.1.35 |
| ifJnxInputErrors Errors: Includes all the input errors except the L3 incompletes
Same as ifJnxInErrors - ifJnxInL3Incompletes | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.3.1.1.36 |
| ifJnxOutEcnMarkedPackets ECN Marked packets: The number of explicit congestion notification packets on output queue | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.3.1.1.37 |
| ifOut1SecOctets The number of octets per second (Bps, Bytes per
second), delivered by this (sub-)layer to its next
lower (sub-)layer. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2636.3.3.1.1.5 |
| ifOut1SecPkts The number of packets per second (pps), delivered
by this (sub-)layer to its next lower (sub-)layer. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2636.3.3.1.1.6 |
| ifHCIn1SecRate The number of bits per second (bps), delivered by
this (sub-)layer to its next higher (sub-)layer.
This object is a 64 bit version of ifIn1SecRate. | column | HCNUM-TCCounterBasedGauge64 | .1.3.6.1.4.1.2636.3.3.1.1.7 |
| ifHCOut1SecRate The number of bits per second (bps), delivered by
this (sub-)layer to its next lower (sub-)layer.
This object is a 64 bit version of ifOut1SecRate. | column | HCNUM-TCCounterBasedGauge64 | .1.3.6.1.4.1.2636.3.3.1.1.8 |
| ifJnxInErrors Errors: The sum of the incoming frame aborts and FCS errors. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.3.1.1.9 |