jnxoptIfODUkTtpDEGThr
JNX-OPT-IF-MIB ·
.1.3.6.1.4.1.2636.3.73.1.1.8.2.1.7
Object
column
r/w
percentage JnxoptIfDEGThr
Indicates the threshold level for declaring a performance monitoring (PM) Second to be bad. A PM Second is declared bad if the percentage of detected errored blocks in that second is greater than or equal to jnxoptIfODUkDEGThr. This object is only applicable to the sink function, i.e., only when jnxoptIfODUkDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where jnxoptIfODUkDirectionality has the value source(2). The default value of this object is Severely Errored Second (SES) Estimator (See ITU-T G.7710).
Context
- MIB
- JNX-OPT-IF-MIB
- OID
.1.3.6.1.4.1.2636.3.73.1.1.8.2.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Units
- percentage
- Parent
- jnxoptIfODUkTtpConfigEntry
- Table
- jnxoptIfODUkTtpConfigTable
- Siblings
- 8
Syntax
percentage JnxoptIfDEGThr
- Source
- JnxoptIfDEGThr
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 1..100
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxoptIfODUkTtpTraceIdentifierTransmitted The trace identifier transmitted.
This object is applicable when jnxoptIfODUkDirectionality
has the value source(2) or bidirectional(3). It must not
be instantiated in rows whe… | column | JnxoptIfTxTI | .1.3.6.1.4.1.2636.3.73.1.1.8.2.1.1 |
| jnxoptIfODUkTtpDAPIExpected The DAPI expected by the receiver.
This object is only applicable to the sink function, i.e.,
only when jnxoptIfODUkDirectionality has the value sink(1)
or bidirectional(3). It… | column | JnxoptIfExDAPI | .1.3.6.1.4.1.2636.3.73.1.1.8.2.1.2 |
| jnxoptIfODUkTtpSAPIExpected The SAPI expected by the receiver.
This object is only applicable to the sink function, i.e.,
only when jnxoptIfODUkDirectionality has the value sink(1)
or bidirectional(3). It… | column | JnxoptIfExSAPI | .1.3.6.1.4.1.2636.3.73.1.1.8.2.1.3 |
| jnxoptIfODUkTtpTraceIdentifierAccepted The actual trace identifier accepted.
This object is only applicable to the sink function, i.e.,
only when jnxoptIfODUkDirectionality has the value sink(1)
or bidirectional(3).… | column | JnxoptIfAcTI | .1.3.6.1.4.1.2636.3.73.1.1.8.2.1.4 |
| jnxoptIfODUkTtpTIMDetMode Indicates the mode of the Trace Identifier Mismatch (TIM)
Detection function.
This object is only applicable to the sink function, i.e.,
only when jnxoptIfODUkDirectionality ha… | column | JnxoptIfTIMDetMode | .1.3.6.1.4.1.2636.3.73.1.1.8.2.1.5 |
| jnxoptIfODUkTtpTIMActEnabled Indicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled.
This object is only applicable to the sink function, i.e.,
only when jnxoptIfODUkDi… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.73.1.1.8.2.1.6 |
| jnxoptIfODUkTtpDEGM Indicates the threshold level for declaring a Degraded Signal
defect (dDEG). A dDEG shall be declared if jnxoptIfODUkDEGM
consecutive bad PM Seconds are detected.
This object i… | column | JnxoptIfDEGM | .1.3.6.1.4.1.2636.3.73.1.1.8.2.1.8 |
| jnxoptIfODUkTtpCurrentStatus Indicates the defect condition of the entity, if any.
This object is only applicable to the sink function, i.e.,
only when jnxoptIfODUkDirectionality has the value sink(1)
or b… | column | Bits | .1.3.6.1.4.1.2636.3.73.1.1.8.2.1.9 |