jnxoptIfODUkTSourceLockSignalAdminState
JNX-OPT-IF-MIB ·
.1.3.6.1.4.1.2636.3.73.1.1.9.1.1.13
Object
column
r/w
Enumeration
Provides the capability to provision the LOCK signal, which is one of the ODUk maintenance signals, at the source. When a Tandem Connection endpoint is set to admin state locked, it inserts the ODUk-LCK signal in the source direction. This object is applicable only when either one of the following three cases holds: (i) jnxoptIfODUkDirectionality has the value bidirectional(3), or (ii) jnxoptIfODUkDirectionality has the value sink(1) and jnxoptIfODUkTCodirectional has the value false(2), or (iii) jnxoptIfODUkDirectionality has the value source(3) and jnxoptIfODUkTCodirectional has the value true(1). It must not be instantiated in rows for all other cases.
Context
- MIB
- JNX-OPT-IF-MIB
- OID
.1.3.6.1.4.1.2636.3.73.1.1.9.1.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- jnxoptIfODUkTConfigEntry
- Table
- jnxoptIfODUkTConfigTable
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | locked |
2 | normal |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxoptIfODUkTTcmField Indicates the tandem connection monitoring
field of the ODUk OH. Valid values are
integers from 1 to 6. | column | Unsigned32 | .1.3.6.1.4.1.2636.3.73.1.1.9.1.1.1 |
| jnxoptIfODUkTDEGM Indicates the threshold level for declaring a Degraded Signal
defect (dDEG). A dDEG shall be declared if jnxoptIfODUkTDEGM
consecutive bad PM Seconds are detected.
This object … | column | JnxoptIfDEGM | .1.3.6.1.4.1.2636.3.73.1.1.9.1.1.10 |
| jnxoptIfODUkTSinkMode This variable specifies the TCM mode at the entity.
The value operational(1) means that TCM Overhead (TCMOH)
processes (see ITU-T G.798) shall be
performed and consequent actio… | column | Enumeration | .1.3.6.1.4.1.2636.3.73.1.1.9.1.1.11 |
| jnxoptIfODUkTSinkLockSignalAdminState Provides the capability to provision the LOCK signal, which
is one of the ODUk maintenance signals, at the ODUKT sink. When
a Tandem Connection endpoint is set to admin state lo… | column | Enumeration | .1.3.6.1.4.1.2636.3.73.1.1.9.1.1.12 |
| jnxoptIfODUkTCurrentStatus Indicates the defect condition of the entity, if any.
This object is applicable only when either one of the
following three cases holds:
(i) jnxoptIfODUkDirectionality has the v… | column | Bits | .1.3.6.1.4.1.2636.3.73.1.1.9.1.1.14 |
| jnxoptIfODUkTRowStatus This columnar object is used for creating and deleting a
conceptual row of the jnxoptIfODUkT config table.
It is used to model the addTCM and removeTCM operations of an
ODUk_CT… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2636.3.73.1.1.9.1.1.15 |
| jnxoptIfODUkTCodirectional Indicates the directionality of the ODUkT termination point with
respect to the associated ODUk CTP. The value true(1) means
that the sink part of the ODUkT TP extracts TCM data… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.73.1.1.9.1.1.2 |
| jnxoptIfODUkTTraceIdentifierTransmitted The trace identifier transmitted.
This object is applicable only to the following three cases.
(i) jnxoptIfODUkDirectionality has the value bidirectional(3), or
(ii) jnxoptIfODU… | column | JnxoptIfTxTI | .1.3.6.1.4.1.2636.3.73.1.1.9.1.1.3 |
| jnxoptIfODUkTDAPIExpected The DAPI expected by the receiver.
This object is applicable only to the following three cases.
(i) jnxoptIfODUkDirectionality has the value bidirectional(3), or
(ii) jnxoptIfOD… | column | JnxoptIfExDAPI | .1.3.6.1.4.1.2636.3.73.1.1.9.1.1.4 |
| jnxoptIfODUkTSAPIExpected The SAPI expected by the receiver.
This object is applicable only to the following three cases.
(i) jnxoptIfODUkDirectionality has the value bidirectional(3), or
(ii) jnxoptIfOD… | column | JnxoptIfExSAPI | .1.3.6.1.4.1.2636.3.73.1.1.9.1.1.5 |
| jnxoptIfODUkTTraceIdentifierAccepted The actual trace identifier accepted.
This object is applicable only to the following three cases.
(i) jnxoptIfODUkDirectionality has the value bidirectional(3), or
(ii) jnxoptI… | column | JnxoptIfAcTI | .1.3.6.1.4.1.2636.3.73.1.1.9.1.1.6 |
| jnxoptIfODUkTTIMDetMode Indicates the mode of the Trace Identifier Mismatch (TIM)
Detection function.
This object is applicable only to the following three cases.
(i) jnxoptIfODUkDirectionality has the… | column | JnxoptIfTIMDetMode | .1.3.6.1.4.1.2636.3.73.1.1.9.1.1.7 |
| jnxoptIfODUkTTIMActEnabled Indicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled.
This object is applicable only to the following three cases.
(i) jnxoptIfODUkDirecti… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.73.1.1.9.1.1.8 |
| jnxoptIfODUkTDEGThr Indicates the threshold level for declaring a performance
monitoring (PM) Second to be bad. A PM Second is declared bad if
the percentage of detected errored blocks in that seco… | column | percentage JnxoptIfDEGThr | .1.3.6.1.4.1.2636.3.73.1.1.9.1.1.9 |