npSecuritySslRedirection
JETDIRECT3-MIB ·
.1.3.6.1.4.1.11.2.4.3.20.23
Object
scalar
r/w
Enumeration
Setting this object causes the SSL redirection connection to be enabled or disabled.
Context
- MIB
- JETDIRECT3-MIB
- OID
.1.3.6.1.4.1.11.2.4.3.20.23- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- npSecurity
- Siblings
- 46
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | redirectionEnabled |
2 | redirectionDisabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| npSecurityDot11ServerAuthentication Server-Based Authentication with the following bitwise values:
None(0),
EAP-MD5(1),
EAP-TLS(2),
LEAP(4),
PEAP(8),
TTLS(16) | scalar | Enumeration | .1.3.6.1.4.1.11.2.4.3.20.1 |
| npSecurityDot11SSIDTableNumEntries Displays the number of discovered SSIDs in
the SSID Table. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.20.10 |
| npSecurityDot11SSLCertLoaded Indicates if SSL certificate has been loaded. | scalar | Enumeration | .1.3.6.1.4.1.11.2.4.3.20.11 |
| npSecurityDot11TLSCertLoaded Indicates if TLS Trusted CA certificate has been loaded. | scalar | Enumeration | .1.3.6.1.4.1.11.2.4.3.20.12 |
| npSecuritySnmpV3EncryptedUserName The encrypted SNMPv3 User Name.
Use the npSecurityPublicKey to encrypt this value.
The new SNMPv3 User Account will be installed after the
npSecuritySnmpV3EncryptedUserName, npSec… | scalar | OctetString | .1.3.6.1.4.1.11.2.4.3.20.13 |
| npSecuritySnmpV3AuthKeyPassPhrase The encrypted SNMPv3 Authentication passphrase or key .
Use the npSecurityPublicKey to encrypt this value.
The new SNMPv3 User Account will be installed after the
npSecuritySnmpV3… | scalar | OctetString | .1.3.6.1.4.1.11.2.4.3.20.14 |
| npSecuritySnmpV3PrivKeyPassPharse The encrypted SNMPv3 Privacy passphrase or key.
Use the npSecurityPublicKey to encrypt this value.
The new SNMPv3 User Account will be installed after the
npSecuritySnmpV3Encrypte… | scalar | OctetString | .1.3.6.1.4.1.11.2.4.3.20.15 |
| npSecurityDot11BSSID The BSSID value (hardware address of the access point). | scalar | OctetString | .1.3.6.1.4.1.11.2.4.3.20.16 |
| npSecurityDot1xTunnelAuthBits The Dot1x Tunnel Authentication Bits. Bitwise field
with the followings bits:
Default All bits cleared
EAP MD5 1
EAP MSCHAP 2
EAP MSCHAPv2 4
MSCHAP… | scalar | Enumeration | .1.3.6.1.4.1.11.2.4.3.20.17 |
| npSecurityDot1xIdentityCleartext The Dot1x Identity in cleartext. | scalar | OctetString | .1.3.6.1.4.1.11.2.4.3.20.18 |
| npSecurityDot11ExactMatchServerId Indicates if an exact match is required on the EAP Server ID. | scalar | Enumeration | .1.3.6.1.4.1.11.2.4.3.20.19 |
| npSecurityDot1xEapMd5Identity Radius MD5 authentication User Name. | scalar | OctetString | .1.3.6.1.4.1.11.2.4.3.20.2 |
| npSecurityDot11EncryptionStrength Indicates the EAP encrytpion strength. | scalar | Enumeration | .1.3.6.1.4.1.11.2.4.3.20.20 |
| npSecurityCertBuff A 512 byte buffer of the print server certificate as indexed by
npSecurityCertBuffIndex. | scalar | OctetString | .1.3.6.1.4.1.11.2.4.3.20.21 |
| npSecurityCertBuffIndex Indicates the index of the 512 byte block of the print server
certificate to load into npSecurityCertBuff. | scalar | Enumeration | .1.3.6.1.4.1.11.2.4.3.20.22 |
| npSecurityReset Setting this object causes security object to reset bact to the defaults. | scalar | Enumeration | .1.3.6.1.4.1.11.2.4.3.20.24 |
| npSecurityWebSpiEnable This object enables/disables the Embedded Web Simple Printer Install feature. | scalar | - | .1.3.6.1.4.1.11.2.4.3.20.25 |
| npSecurityDot11WEPStrength Indicates the encryption strength of the WEP keys. | scalar | Enumeration | .1.3.6.1.4.1.11.2.4.3.20.26 |
| npSecurityServicesSupported BITWISE indication of the 802.11 security services this device supports.
The following bits are defined:
MD5 (0)
TLS… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.20.27 |
| npSecurityDot11Encryption 802.11 encryption method currently enabled.
The following values are defined:
NONE (0x00)
SSN/WEP (0x01)
TKIP (0x02)
AES (0x03)
AUTO … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.20.28 |
| npSecurityDot11MulticastCipher BITWISE indication of the multicast cipher method currently enabled.
At minimum, one bit must be set.
The following bits are defined:
WEP (0)
WPA … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.20.29 |
| npSecurityDot1xTLSAuthServerId TLS authentication Server ID. | scalar | OctetString | .1.3.6.1.4.1.11.2.4.3.20.3 |
| npSecurityDot11BeaconTableNumEntries Displays the number of discovered SSIDs in the DOT11 Beacon Table. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.20.34 |
| npSecurityDot11OpenSSIDEnabled Indicates if the Open SSID is enabled (Spirit-only). | scalar | - | .1.3.6.1.4.1.11.2.4.3.20.35 |
| npSecurityDot11EncryptedWPAConfigPSKPassPhrase The encrypted WPA Config PSK PassPhrase. Use the
npSecurityPublicKey to encrypt this value | scalar | OctetString | .1.3.6.1.4.1.11.2.4.3.20.36 |
| npSecurityDot11DataRate Current wireless network data rate | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.20.37 |
| npSecurityDot11ScanComplete Used to control scan for SSIDs in the wireless network.
Set to false to initiate a scan. A value of true indicates
the completion of the scan | scalar | Enumeration | .1.3.6.1.4.1.11.2.4.3.20.38 |
| npSecurityDot11RoamThreshold Used to control roaming by the wireless radio. The radio on
the print server will roam or try to find an access point with
a stronger signal once the signal strength from the asso… | scalar | Enumeration | .1.3.6.1.4.1.11.2.4.3.20.39 |
| npSecurityPublicKey The public key of a public/private key pair to be
used by applications to set encrypted values. | scalar | OctetString | .1.3.6.1.4.1.11.2.4.3.20.4 |
| npSecuritySslEncryptionStrength The SSL Encryption Strength. | scalar | Enumeration | .1.3.6.1.4.1.11.2.4.3.20.40 |
| npSecurityDot11InstantVerification Enable and disable wireless instant verification.
(0) = Disable
(1) = Enable | scalar | Enumeration | .1.3.6.1.4.1.11.2.4.3.20.41 |
| npSecurityDot11DynamicEncryption WPA mode.
(0x00) = NONE
(0x01) = BASIC
(0x02) = WPA
(0x03) = WPA2
(0x04) = AUTO | scalar | Enumeration | .1.3.6.1.4.1.11.2.4.3.20.42 |
| npSecurityDot11LinkAuthentication DOT11 Link Authentication modes.
(1) = OPEN
(2) = SHARED-KEY
(128) = LEAP
(143) = AUTO
We can set the Link Authentication using the object dot11AuthenticationAlgorithms… | scalar | Enumeration | .1.3.6.1.4.1.11.2.4.3.20.43 |
| npSecuritySnmpV3AuthAlgorithm Indicates the Authentication Algorithm used.
It can have the value MD5 or SHA-1.
This key will have a default value set to MD5.
The following values are defined:
MD5 2 (Default… | scalar | Enumeration | .1.3.6.1.4.1.11.2.4.3.20.44 |
| npSecuritySnmpV3PrivAlgorithm Indicates the Privacy Algorithm used.
It can have the value DES or AES-128.
This key will have a default value set to DES.
The following values are defined:
DES 2 (Default)
… | scalar | Enumeration | .1.3.6.1.4.1.11.2.4.3.20.45 |
| npSecurityDot11EncryptedDot11NetworkName The encrypted network name (SSID). Use the
npSecurityPublicKey to encrypt this value.
Setting this object will cause the card to reconfigure. | scalar | OctetString | .1.3.6.1.4.1.11.2.4.3.20.5 |
| npSecurityWirelessDirectEncryptionMethod This is used to select the encryption protocol in Wireless Direct Mode.
The following values are defined:
No Security ( 1 )
WPA ( 2 ) | scalar | Enumeration | .1.3.6.1.4.1.11.2.4.3.20.51 |
| npSecurityWirelessDirectEncryptedPassPhrase The WPA2 Passphrase or pre-shared key for secure Wireless Direct.
The values allowed are 8 to 63 printable ASCII characters for passphrase
or a 64 character hex value for pre-shar… | scalar | OctetString | .1.3.6.1.4.1.11.2.4.3.20.55 |
| npSecurityDot1xFailSafe After configuring 802.1x on the printer and switching it over to a secured network, if authentication is
successful printer retains connectivity and if it fails it loses connectiv… | scalar | Enumeration | .1.3.6.1.4.1.11.2.4.3.20.57 |
| npSecurityDot11EncryptedDot1xEapMd5Secret The encrypted dot1xEapMD5Secret authentication password.
Use the npSecurityPublicKey to encrypt this value.
Setting this object will cause the card to reconfigure. | scalar | OctetString | .1.3.6.1.4.1.11.2.4.3.20.6 |
| npSecurityIppAuthentication IPP Authentication is a feature which provides 'HTTP Basic Authentication'
for IPP Print-Jobs.
Use this OID to Enable/Disable IPP Authentication.
0 - Disable… | scalar | Enumeration | .1.3.6.1.4.1.11.2.4.3.20.61 |
| npSecurityIppAuthUsername IPP Authentication is a feature which provides
'HTTP Basic Authentication' for IPP Print-Jobs.
Use this OID to configure the IPP Authentication Username.
Strings of len… | scalar | OctetString | .1.3.6.1.4.1.11.2.4.3.20.62 |
| npSecurityIppEncryptedAuthPassword IPP Authentication is a feature which provides
'HTTP Basic Authentication' for IPP Print-Jobs.
Use this OID to configure the IPP Authentication Password.
Strings of len… | scalar | OctetString | .1.3.6.1.4.1.11.2.4.3.20.63 |
| npSecurityDot11EncryptedWEPKeyTable Encrypted interface to the WEP Keys. | table | - | .1.3.6.1.4.1.11.2.4.3.20.7 |
| npSecurityDot11SignalStrength A weighted average over time of the signal strength
between the access point and the print server in infrastructure
mode. Not applicable when in ad hoc mode. | scalar | Enumeration | .1.3.6.1.4.1.11.2.4.3.20.8 |
| npSecurityDot11SSIDTable List of discovered SSIDs. | table | - | .1.3.6.1.4.1.11.2.4.3.20.9 |