npIpxRestart
JETDIRECT3-MIB ·
.1.3.6.1.4.1.11.2.4.3.10.16
Object
Setting of this object to zero causes a soft reset of the board, setting to one causes a hard reset of the board.
Context
- MIB
- JETDIRECT3-MIB
- OID
.1.3.6.1.4.1.11.2.4.3.10.16- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- npIpx
- Siblings
- 22
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Object Constraints
range: -40--5
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| npIpxGetUnitCfgResp This object is the Get Unit Config Response
structure described in the IPX code. This
structure is of variable length depending
on how many servers are configured. | scalar | OctetString | .1.3.6.1.4.1.11.2.4.3.10.1 |
| npIpxNdsFullyQualifiedName | node | - | .1.3.6.1.4.1.11.2.4.3.10.10 |
| npIpxServerConnTable A list of npIpxServerConn entries. | table | - | .1.3.6.1.4.1.11.2.4.3.10.11 |
| npIpxObsoleteServerConnInfo | node | - | .1.3.6.1.4.1.11.2.4.3.10.12 |
| npIpxRcfgAddress The 12 octet IPX address of the Novell RCFG socket. The address
is in network byte order. | scalar | OctetString | .1.3.6.1.4.1.11.2.4.3.10.13 |
| npIpxRcfgRemotePrintServerName Remote print server name. | scalar | OctetString | .1.3.6.1.4.1.11.2.4.3.10.14 |
| npIpxRcfgRemotePrinterNumber remote Printer Number (valid in remote Printer Mode only)
range: 0-255 for 4.X servers
0-15 for 3.X servers | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.10.15 |
| npIpxSourceRoute This object provides control/status for source route. Options
for Token Ring networks are as follows:
00 - Auto Sensing mode
01 - Send without SR, receive only if same … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.10.17 |
| npIpxFrameType This object returns the frame type current enabled,
possibilities are as follows:
00 - Auto
01 - Ethernet 8023 or Token-ring
02 - Ethernet II or Token-ring SNAP
03 - Et… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.10.18 |
| npIpxJobPollInterval Queue server job poll interval. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.10.19 |
| npIpx8022frametype The number of IPX FT8022 frames received. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.10.2 |
| npIpxSapBroadcastInterval Currently effective SAP broadcast Interval:
range: 0-3600 seconds
default: 60 seconds
0 value indicates SAP broadcasts are disabled. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.10.20 |
| npIpxPjlEnableFlag Currently effective PJL Enable Flag, possible values include:
00 - PJL disable
01 - PJL Job, banner
02 - Ustatus for end of job detection
03 - banners and end of job de… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.10.21 |
| npIpxTonerLowNotification Current Configuration for toner low notification. Possible
values include:
00 - notify only if intervention is required.
01 - Notify even if peripheral is still operati… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.10.22 |
| npIpxNetNumber Current Ipx network number. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.10.23 |
| npIpxSNAPframetype The number of IPX FTSNAP frames received. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.10.3 |
| npIpxEthernetframetype The number of IPX FTEthernet frames received. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.10.4 |
| npIpx8023Rawframetype The number of IPX FT8023RAW frames received. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.10.5 |
| npIpxSapInfo This is a 50 byte array that contains the following
information.
2 bytes: bindery object type (always 030c in hi-lo order)
12 bytes: Mac address of card (ASCII)
2 bytes: f… | scalar | OctetString | .1.3.6.1.4.1.11.2.4.3.10.6 |
| npIpxGetUnitCfgResp2 This object is the Get Unit Config Response
structure described in the IPX code. This
structure is of variable length depending
on how many servers are configured. This is
the s… | scalar | OctetString | .1.3.6.1.4.1.11.2.4.3.10.7 |
| npIpxUnitName This is the name by which the device advertises over NetWare. In
remote printer mode, this is referred to as the node name. In
queue server mode this name doubles as the print s… | scalar | OctetString | .1.3.6.1.4.1.11.2.4.3.10.8 |
| npIpxNdsTreeName This is the name of the NDS tree by which the JetDirect attempts
to connect and authenticate. NDS support is enabled when this
value is provided (although connections do not beco… | scalar | OctetString | .1.3.6.1.4.1.11.2.4.3.10.9 |