asamNextAvailablePort
ITF-MIB-EXT ·
.1.3.6.1.4.1.637.61.1.6.7
Object
This object gives the next available physical interface for which
the ifType is as specified in asamNextAvailablePortType. A physical
interface is considered available if its asamIfExtCustomerId has
the value 'available' and its internal ASAM state is 'reachable'.
If no interface of the desired type is available an error (genErr)
is returned when a get-request is issued for this object.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA
Context
- MIB
- ITF-MIB-EXT
- OID
.1.3.6.1.4.1.637.61.1.6.7- Type
- scalar
- Access
- readonly
- Status
- mandatory
- Parent
- asamItfMIB
- Siblings
- 14
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| asamPhyItfOperStatus obsolete The bitmap for the operational status of the physical interfaces.
MAX_PIF: the maximum number of interface per board
SLOTS: the number of slots in the system
… | scalar | OctetString | .1.3.6.1.4.1.637.61.1.6.1 |
| asamShelfPhyItfSummaryTable mandatory Shelf summary table, summarizing status information of physical
interfaces of boards which can be equipped within the
corresponding shelf.
ALCATEL NOTE:
TABLESIZE: D… | table | - | .1.3.6.1.4.1.637.61.1.6.10 |
| asamLluTable mandatory The Local Loop Unbundling Table.
ALCATEL NOTE:
TABLESIZE: DEP same size as the ifTable | table | - | .1.3.6.1.4.1.637.61.1.6.11 |
| asamIfExtCounterSupportTable mandatory A Table listing the supported counters for a particular interface .
ALCATEL NOTE:
TABLESIZE: DEP number of supported interface types. | table | - | .1.3.6.1.4.1.637.61.1.6.12 |
| asamIfIndexToExtIfIndexMappingTable mandatory ifIndex to extended ifIndex Mapping Table.
ALCATEL NOTE:
TABLESIZE: DEP same size as the ifTable. | table | - | .1.3.6.1.4.1.637.61.1.6.13 |
| asamExtIfIndexToIfIndexMappingTable mandatory Extended-ifIndex to ifIndex Mapping Table.
ALCATEL NOTE:
TABLESIZE: DEP same size as the ifTable. | table | - | .1.3.6.1.4.1.637.61.1.6.14 |
| asamIfPortTypeTable mandatory EFM Interface PortType Table.
ALCATEL NOTE:
TABLESIZE: Entry will be equivalent to number of EFM interfaces exist. | table | - | .1.3.6.1.4.1.637.61.1.6.15 |
| asamPhyItfBitmap obsolete The bitmap for the physical interfaces.
MAX_PIF: the maximum number of interface per board
SLOTS: the number of slots in the system
Layout: 1..MAX_PIF 1..MAX… | scalar | OctetString | .1.3.6.1.4.1.637.61.1.6.2 |
| asamPhyItfChangeOccurredTrapEnable obsolete Boolean indicating wether the changeOccurredTrap should be sent
or not. The trap will not be sent if the linkUpDownTrap was already
sent (regardless of the value asamChangeOccurre… | scalar | Enumeration | .1.3.6.1.4.1.637.61.1.6.3 |
| asamPhyItfNumberChangeOccurred mandatory This is a counter indicating the number of state changes of the
physical line.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: … | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.637.61.1.6.4 |
| asamIfExtTable mandatory An extension to the ifTable defined in ITF-MIB.
ALCATEL NOTE:
TABLESIZE: DEP same size as the ifTable. | table | - | .1.3.6.1.4.1.637.61.1.6.5 |
| asamNextAvailablePortType mandatory This object contains the ifType for which the next available
physical interface can be retrieved. Only values of ifType that
represent physical interfaces are allowed.
… | scalar | IANAifType-MIBIANAifType | .1.3.6.1.4.1.637.61.1.6.6 |
| asamIfExtAlmReportingSeverityDefaultTable mandatory A table specifying for each of the supported interface types
for asamIfExtAlmReportingSeverity its default minimal severity.
ALCATEL NOTE:
TABLESIZE: DEP number of s… | table | - | .1.3.6.1.4.1.637.61.1.6.8 |
| asamItfTest | node | - | .1.3.6.1.4.1.637.61.1.6.9 |