isdnBearerPeerAddress
ISDN-MIB ·
.1.3.6.1.2.1.10.20.1.2.1.1.4
Object
column
SNMPv2-TCDisplayString
The ISDN address the current or last call is or was
connected to.
In some cases, the format of this information can not
be predicted, since it largely depends on the type
of switch or PBX the device is connected to. Therefore,
the detailed format of this information is not
specified and is implementation dependent.
If possible, the agent should supply this information
using the E.164 format. In this case, the number must
start with '+'. Otherwise, IA5 number digits must be used.
If the peer ISDN address is not available,
this object has a length of zero.
Context
- MIB
- ISDN-MIB
- OID
.1.3.6.1.2.1.10.20.1.2.1.1.4- Type
- column
- Access
- readonly
- Status
- current
- Parent
- isdnBearerEntry
- Table
- isdnBearerTable
- Siblings
- 10
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| isdnBearerChannelType The B channel type. If the B channel is connected
to a dialup line, this object has a value of
dialup(1). In this case, it is controlled by
an associated signaling channel. If the… | column | Enumeration | .1.3.6.1.2.1.10.20.1.2.1.1.1 |
| isdnBearerCallConnectTime The value of sysUpTime when the ISDN connect message for
the current or last call was sent or received. If since
system startup there has been no call on this interface,
this obje… | column | SNMPv2-TCTimeStamp | .1.3.6.1.2.1.10.20.1.2.1.1.10 |
| isdnBearerChargedUnits The number of charged units for the current or last
connection. For incoming calls or if charging information
is not supplied by the switch, the value of this object
is zero. | column | SNMPv2-SMIGauge32 | .1.3.6.1.2.1.10.20.1.2.1.1.11 |
| isdnBearerOperStatus The current call control state for this port.
idle(1): The B channel is idle.
No call or call attempt is going on.
connecting(2): A connection attempt (outgoi… | column | Enumeration | .1.3.6.1.2.1.10.20.1.2.1.1.2 |
| isdnBearerChannelNumber The identifier being used by a signaling protocol
to identify this B channel, also referred to as
B channel number. If the Agent also supports the DS0 MIB,
the values of isdnBeare… | column | Integer32 | .1.3.6.1.2.1.10.20.1.2.1.1.3 |
| isdnBearerPeerSubAddress The ISDN subaddress the current or last call is or was
connected to.
The subaddress is an user supplied string of up to 20
IA5 characters and is transmitted transpa… | column | SNMPv2-TCDisplayString | .1.3.6.1.2.1.10.20.1.2.1.1.5 |
| isdnBearerCallOrigin The call origin for the current or last call. If since
system startup there was no call on this interface,
this object has a value of unknown(1). | column | Enumeration | .1.3.6.1.2.1.10.20.1.2.1.1.6 |
| isdnBearerInfoType The Information Transfer Capability for the current
or last call.
speech(2) refers to a non-data connection, whereas
audio31(6) and audio7(7) refer to data mode con… | column | Enumeration | .1.3.6.1.2.1.10.20.1.2.1.1.7 |
| isdnBearerMultirate This flag indicates if the current or last call used
multirate. The actual information transfer rate,
in detail specified in octet 4.1 (rate multiplier),
is the sum of all B chann… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.10.20.1.2.1.1.8 |
| isdnBearerCallSetupTime The value of sysUpTime when the ISDN setup message for
the current or last call was sent or received. If since
system startup there has been no call on this interface,
this object… | column | SNMPv2-TCTimeStamp | .1.3.6.1.2.1.10.20.1.2.1.1.9 |