ipsecSaEspInAuthKeyLength
IPSEC-SA-MON-MIB ·
.1.3.6.1.2.1.500.1.1.1.1.15
Object
column
bits Unsigned32
The length of the authentication key in bits used for the algorithm specified in the 'ipsecSaEspInAuthAlg'. It may be 0 if the key length is implicit in the specified algorithm or there is no authentication specified.
Context
- MIB
- IPSEC-SA-MON-MIB
- OID
.1.3.6.1.2.1.500.1.1.1.1.15- Type
- column
- Access
- readonly
- Status
- current
- Units
- bits
- Parent
- ipsecSaEspInEntry
- Table
- ipsecSaEspInTable
- Siblings
- 27
Syntax
bits Unsigned32
Values & Constraints
Object Constraints
range: 0-65531
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ipsecSaEspInAddress The destination address of the SA.
IPv4 entities will prefix the IP address with
'0000:0000:0000:0000:0000:FFFF::'. | column | IpsecIpv6Address | .1.3.6.1.2.1.500.1.1.1.1.1 |
| ipsecSaEspInCreator The creator of this SA.
This MIB makes no assumptions about how the SAs are created.
They may be created statically, or by a key exchange
protocol such as IKE, or b… | column | IpsecSaCreatorIdent | .1.3.6.1.2.1.500.1.1.1.1.10 |
| ipsecSaEspInEncapsulation The type of encapsulation used by this SA. | column | IPSEC-ISAKMP-IKE-DOI-TCIpsecDoiEncapsulationMode | .1.3.6.1.2.1.500.1.1.1.1.11 |
| ipsecSaEspInEncAlg A unique value representing the encryption algorithm
applied to traffic or 0 if there is no encryption used. | column | IPSEC-ISAKMP-IKE-DOI-TCIpsecDoiEspTransform | .1.3.6.1.2.1.500.1.1.1.1.12 |
| ipsecSaEspInEncKeyLength The length of the encryption key in bits used for the
algorithm specified in the 'ipsecSaEspInEncAlg' object. It
may be 0 if the key length is implicit in the specified
algorithm … | column | bits Unsigned32 | .1.3.6.1.2.1.500.1.1.1.1.13 |
| ipsecSaEspInAuthAlg A unique value representing the hash algorithm applied to
traffic or 0 if there is no authentication used. | column | IPSEC-ISAKMP-IKE-DOI-TCIpsecDoiAuthAlgorithm | .1.3.6.1.2.1.500.1.1.1.1.14 |
| ipsecSaEspInRepWinSize The size of the anti-replay window used by this SA, or 0 if
anti-replay checking is not being done. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.500.1.1.1.1.16 |
| ipsecSaEspInLimitSeconds The maximum lifetime in seconds of the SA, or 0 if there is
no time constraint on its expiration.
The display value is limited to 4294967295 seconds (more
than 136 … | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.500.1.1.1.1.17 |
| ipsecSaEspInLimitKbytes The maximum traffic in kilobytes that the SA is allowed to
process, or 0 if there is no traffic constraint on its
expiration.
The display value is limited to 429496… | column | kilobytes SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.500.1.1.1.1.18 |
| ipsecSaEspInAccSeconds The number of seconds accumulated against the SA's
expiration by time.
This is also the number of seconds that the SA has existed. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.2.1.500.1.1.1.1.19 |
| ipsecSaEspInSpi The security parameters index of the SA. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.500.1.1.1.1.2 |
| ipsecSaEspInAccKbytes The amount of traffic accumulated that counts against the
SA's expiration by traffic limitation, measured in
kilobytes.
This value may be 0 if the SA does not expir… | column | kilobytes SNMPv2-SMICounter32 | .1.3.6.1.2.1.500.1.1.1.1.20 |
| ipsecSaEspInUserOctets The amount of user level traffic measured in bytes handled
by the SA. This is the number of bytes of the decrypted IP
packet, including the original IP header of that decrypted
pa… | column | bytes SNMPv2-SMICounter64 | .1.3.6.1.2.1.500.1.1.1.1.21 |
| ipsecSaEspInPackets The number of packets handled by the SA. | column | SNMPv2-SMICounter64 | .1.3.6.1.2.1.500.1.1.1.1.22 |
| ipsecSaEspInDecryptErrors The number of packets discarded by the SA due to detectable
decryption errors. Not all decryption errors are detectable
within SA processing, so this count should not be considere… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.500.1.1.1.1.23 |
| ipsecSaEspInAuthErrors The number of packets discarded by the SA due to
authentication errors. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.500.1.1.1.1.24 |
| ipsecSaEspInReplayErrors The number of packets discarded by the SA due to replay
errors. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.500.1.1.1.1.25 |
| ipsecSaEspInPolicyErrors The number of packets discarded by the SA due to policy
errors. This includes packets where the next protocol is
invalid. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.500.1.1.1.1.26 |
| ipsecSaEspInPadErrors The number of packets discarded by the SA due to pad value
errors.
Implementations that do not check this must not support this
object. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.500.1.1.1.1.27 |
| ipsecSaEspInOtherReceiveErrors The number of packets discarded by the SA due to errors
other than decryption, authentication, replay errors or,
when supported, invalid padding errors. This may include
packets d… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.500.1.1.1.1.28 |
| ipsecSaEspInDestId The destination identifier of the SA. It may be 0 if
unknown or if the SA uses transport mode encapsulation.
This value is taken directly from the optional ID paylo… | column | IpsecRawId | .1.3.6.1.2.1.500.1.1.1.1.3 |
| ipsecSaEspInDestIdType The type of identifier presented by 'ipsecSaEspInDestId'.
It may be 0 if unknown or if the SA uses transport mode
encapsulation. | column | IPSEC-ISAKMP-IKE-DOI-TCIpsecDoiIdentType | .1.3.6.1.2.1.500.1.1.1.1.4 |
| ipsecSaEspInSourceId The source identifier of the SA. It may be 0 if unknown or
if the SA uses transport mode encapsulation.
This value is taken directly from the optional ID payloads
t… | column | IpsecRawId | .1.3.6.1.2.1.500.1.1.1.1.5 |
| ipsecSaEspInSourceIdType The type of identifier presented by 'ipsecSaEspInSourceId'.
It may be 0 if unknown or if the SA uses transport mode
encapsulation. | column | IPSEC-ISAKMP-IKE-DOI-TCIpsecDoiIdentType | .1.3.6.1.2.1.500.1.1.1.1.6 |
| ipsecSaEspInProtocol The transport-layer protocol number that this SA carries,
or 0 if it carries any protocol. | column | Integer32 | .1.3.6.1.2.1.500.1.1.1.1.7 |
| ipsecSaEspInDestPort The destination port number of the protocol that this SA
carries, or 0 if it carries any port number. | column | Integer32 | .1.3.6.1.2.1.500.1.1.1.1.8 |
| ipsecSaEspInSourcePort The source port number of the protocol that this SA
carries, or 0 if it carries any port number. | column | Integer32 | .1.3.6.1.2.1.500.1.1.1.1.9 |