ipsecSaAhInSourceId
IPSEC-SA-MON-MIB ·
.1.3.6.1.2.1.500.1.1.2.1.5
Object
column
IpsecRawId
The source identifier of the SA. It may be 0 if unknown or
if the SA uses transport mode encapsulation.
This value is taken directly from the optional ID payloads
that are exchanged during SA creation negotiation or the
equivelant process.
Context
- MIB
- IPSEC-SA-MON-MIB
- OID
.1.3.6.1.2.1.500.1.1.2.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ipsecSaAhInEntry
- Table
- ipsecSaAhInTable
- Siblings
- 23
Syntax
IpsecRawId
- Source
- IpsecRawId
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ipsecSaAhInAddress The destination address of the SA.
IPv4 entities will prefix the IP address with
'0000:0000:0000:0000:0000:FFFF::'. | column | IpsecIpv6Address | .1.3.6.1.2.1.500.1.1.2.1.1 |
| ipsecSaAhInCreator The creator of this SA.
This MIB makes no assumptions about how the SAs are created.
They may be created statically, or by a key exchange
protocol such as IKE, or b… | column | IpsecSaCreatorIdent | .1.3.6.1.2.1.500.1.1.2.1.10 |
| ipsecSaAhInEncapsulation The type of encapsulation used by this SA. | column | IPSEC-ISAKMP-IKE-DOI-TCIpsecDoiEncapsulationMode | .1.3.6.1.2.1.500.1.1.2.1.11 |
| ipsecSaAhInAuthAlg A unique value representing the hash algorithm applied to
traffic carried by this SA. | column | IPSEC-ISAKMP-IKE-DOI-TCIpsecDoiAhTransform | .1.3.6.1.2.1.500.1.1.2.1.12 |
| ipsecSaAhInAuthKeyLength The length of the authentication key in bits used for the
algorithm specified in the 'ipsecSaAhInAuthAlg' object. It
may be 0 if the key length is implicit in the specified
algori… | column | bits Unsigned32 | .1.3.6.1.2.1.500.1.1.2.1.13 |
| ipsecSaAhInRepWinSize The size of the anti-replay window used by this SA, or 0 if
anti-replay checking is not being done. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.500.1.1.2.1.14 |
| ipsecSaAhInLimitSeconds The maximum lifetime in seconds of the SA, or 0 if there is
no time constraint on its expiration.
The display value is limited to 4294967295 seconds (more
than 136 … | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.500.1.1.2.1.15 |
| ipsecSaAhInLimitKbytes The maximum traffic in bytes that the SA is allowed to
process, or 0 if there is no traffic constraint on its
expiration.
The display value is limited to 4294967295… | column | kilobytes SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.500.1.1.2.1.16 |
| ipsecSaAhInAccSeconds The number of seconds accumulated against the SA's
expiration by time.
This is also the number of seconds that the SA has existed. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.2.1.500.1.1.2.1.17 |
| ipsecSaAhInAccKbytes The amount of traffic accumulated that counts against the
SA's expiration by traffic limitation, measured in
kilobytes.
This value may be 0 if the SA does not expir… | column | kilobytes SNMPv2-SMICounter32 | .1.3.6.1.2.1.500.1.1.2.1.18 |
| ipsecSaAhInUserOctets The amount of user level traffic measured in bytes handled
by the SA. This is the number of bytes of the de-processed
IP packet, including the original IP header of that de-
proce… | column | bytes SNMPv2-SMICounter64 | .1.3.6.1.2.1.500.1.1.2.1.19 |
| ipsecSaAhInSpi The security parameters index of the SA. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.500.1.1.2.1.2 |
| ipsecSaAhInPackets The number of packets handled by the SA. | column | SNMPv2-SMICounter64 | .1.3.6.1.2.1.500.1.1.2.1.20 |
| ipsecSaAhInAuthErrors The number of packets discarded by the SA due to
authentication errors. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.500.1.1.2.1.21 |
| ipsecSaAhInReplayErrors The number of packets discarded by the SA due to replay
errors. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.500.1.1.2.1.22 |
| ipsecSaAhInPolicyErrors The number of packets discarded by the SA due to policy
errors. This includes packets where the next protocol is
invalid. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.500.1.1.2.1.23 |
| ipsecSaAhInOtherReceiveErrors The number of packets discarded by the SA due to errors
other than decryption, authentication or replay errors. This
may include packets dropped due to a lack of receive
buffers, … | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.500.1.1.2.1.24 |
| ipsecSaAhInDestId The destination identifier of the SA. It may be 0 if
unknown or if the SA uses transport mode encapsulation.
This value is taken directly from the optional ID paylo… | column | IpsecRawId | .1.3.6.1.2.1.500.1.1.2.1.3 |
| ipsecSaAhInDestIdType The type of identifier presented by 'ipsecSaAhInDestId'. It
may be 0 if unknown or if the SA uses transport mode
encapsulation. | column | IPSEC-ISAKMP-IKE-DOI-TCIpsecDoiIdentType | .1.3.6.1.2.1.500.1.1.2.1.4 |
| ipsecSaAhInSourceIdType The type of identifier presented by 'ipsecSaAhInSourceId'.
It may be 0 if unknown or if the SA uses transport mode
encapsulation. | column | IPSEC-ISAKMP-IKE-DOI-TCIpsecDoiIdentType | .1.3.6.1.2.1.500.1.1.2.1.6 |
| ipsecSaAhInProtocol The transport-layer protocol number that this SA carries,
or 0 if it carries any protocol. | column | Integer32 | .1.3.6.1.2.1.500.1.1.2.1.7 |
| ipsecSaAhInDestPort The destination port number of the protocol that this SA
carries, or 0 if it carries any port number. | column | Integer32 | .1.3.6.1.2.1.500.1.1.2.1.8 |
| ipsecSaAhInSourcePort The source port number of the protocol that this SA
carries, or 0 if it carries any port number. | column | Integer32 | .1.3.6.1.2.1.500.1.1.2.1.9 |