ipspIpOffsetFilterTable

IPSEC-POLICY-MIB · .1.3.6.1.2.1.153.1.9

Object

table

This table contains a list of filter definitions to be used
within the ipspRuleDefinitionTable or the
ipspSubfilterTable.

Context

MIB: IPSEC-POLICY-MIB
OID: .1.3.6.1.2.1.153.1.9
Type: table
Status: current
Parent: ipspConfigObjects
Siblings: 34
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
ipspLocalConfigObjects	node	-	`.1.3.6.1.2.1.153.1.1`
ipspTimeFilterTable Defines a table of filters which can be used to effectively enable or disable policies based on a valid time range.	table	-	`.1.3.6.1.2.1.153.1.10`
ipspIpsoHeaderFilterTable This table contains a list of IPSO header filter definitions to be used within the ipspRuleDefinitionTable or the ipspSubfilterTable. IPSO headers and their values are described …	table	-	`.1.3.6.1.2.1.153.1.11`
ipspCredentialFilterTable This table defines filters which can be used to match credentials of IKE peers, where the credentials in question have been obtained from an IKE phase 1 exchange. They may be X.5…	table	-	`.1.3.6.1.2.1.153.1.12`
ipspPeerIdentityFilterTable This table defines filters which can be used to match credentials of IKE peers, where the credentials in question have been obtained from an IKE phase 1 exchange. They may be X.5…	table	-	`.1.3.6.1.2.1.153.1.13`
ipspCompoundActionTable Table used to allow multiple actions to be associated with a rule. It uses the ipspSubactionsTable to do this.	table	-	`.1.3.6.1.2.1.153.1.14`
ipspSubactionsTable This table contains a list of the sub-actions within a given compound action. Compound actions executing these actions MUST execute them in series based on the ipspSubActPriority…	table	-	`.1.3.6.1.2.1.153.1.15`
ipspStaticActions	node	-	`.1.3.6.1.2.1.153.1.16`
ipspSaPreconfiguredActionTable This table is a list of non-negotiated IPsec actions (SAs) that can be performed and contains or indicates the data necessary to create such an SA.	table	-	`.1.3.6.1.2.1.153.1.17`
ipspSaNegotiationParametersTable This table contains reusable parameters that can be pointed to by the ipspIkeActionTable and ipspIpsecActionTable. These parameters are reusable since it is likely an administrat…	table	-	`.1.3.6.1.2.1.153.1.18`
ipspIkeActionTable The ipspIkeActionTable contains a list of the parameters used for an IKE phase 1 SA DOI negotiation. See the corresponding table ipspIkeActionProposalsTable for a list of proposa…	table	-	`.1.3.6.1.2.1.153.1.19`
ipspEndpointToGroupTable This table is used to map policy (groupings) onto an endpoint where traffic is to pass by. Any policy group assigned to an endpoint is then used to control access to the traffic …	table	-	`.1.3.6.1.2.1.153.1.2`
ipspIkeActionProposalsTable This table contains a list of all ike proposal names found within a given IKE Action.	table	-	`.1.3.6.1.2.1.153.1.20`
ipspIkeProposalTable This table contains a list of IKE proposals which are used in an IKE negotiation.	table	-	`.1.3.6.1.2.1.153.1.21`
ipspIpsecActionTable The ipspIpsecActionTable contains a list of the parameters used for an IKE phase 2 IPsec DOI negotiation.	table	-	`.1.3.6.1.2.1.153.1.22`
ipspIpsecProposalsTable This table lists one or more IPsec proposals for IPsec actions.	table	-	`.1.3.6.1.2.1.153.1.23`
ipspIpsecTransformsTable This table lists the IPsec proposals contained within a given IPsec action and the transforms within each of those proposals. These proposals and transforms can then be used to c…	table	-	`.1.3.6.1.2.1.153.1.24`
ipspAhTransformTable This table lists all the AH transforms which can be used to build IPsec proposals.	table	-	`.1.3.6.1.2.1.153.1.25`
ipspEspTransformTable This table lists all the ESP transforms which can be used to build IPsec proposals	table	-	`.1.3.6.1.2.1.153.1.26`
ipspIpcompTransformTable This table lists all the IP compression transforms which can be used to build IPsec proposals during negotiation of a phase 2 SA.	table	-	`.1.3.6.1.2.1.153.1.27`
ipspIkeIdentityTable IKEIdentity is used to represent the identities that may be used for an IPProtocolEndpoint (or collection of IPProtocolEndpoints) to identify itself in IKE phase 1 negotiations. …	table	-	`.1.3.6.1.2.1.153.1.28`
ipspPeerIdentityTable PeerIdentity is used to represent the identities that may be used for peers to identify themselves in IKE phase I/II negotiations. PeerIdentityTable aggregates the table entries …	table	-	`.1.3.6.1.2.1.153.1.29`
ipspGroupContentsTable This table contains a list of rules and/or subgroups contained within a given policy group. The entries are sorted by the ipspGroupContPriority object and MUST be executed in ord…	table	-	`.1.3.6.1.2.1.153.1.3`
ipspAutostartIkeTable The parameters in the autostart IKE Table are used to automatically initiate IKE phaes I and II (i.e. IPsec) negotiations on startup. It also will initiate IKE phase I and II neg…	table	-	`.1.3.6.1.2.1.153.1.30`
ipspIpsecCredMngServiceTable A table of Credential Management Service values. This table is usually used for credential/certificate values that are used with a management service (e.g. Certificate Authoritie…	table	-	`.1.3.6.1.2.1.153.1.31`
ipspCredMngCRLTable A table of the Credential Revocation Lists (CRL) for credential managment services.	table	-	`.1.3.6.1.2.1.153.1.32`
ipspRevokedCertificateTable A table of Credentials revoked by credential managment services. That is, this table is a table of Certificates that are on CRL's, Credential Revocation Lists.	table	-	`.1.3.6.1.2.1.153.1.33`
ipspCredentialTable A table of credential values. Example of Credentials are shared secrets, certificates or kerberos tickets.	table	-	`.1.3.6.1.2.1.153.1.34`
ipspCredentialSegmentTable A table of credential segments. This table is used for credentials which are larger than the maximum size allowed for ipspCredCredential.	table	-	`.1.3.6.1.2.1.153.1.35`
ipspRuleDefinitionTable This table defines a policy rule by associating a filter or a set of filters to an action to be executed.	table	-	`.1.3.6.1.2.1.153.1.4`
ipspCompoundFilterTable A table defining a compound set of filters and their associated parameters. A row in this table can either be pointed to by a ipspRuleDefFilter object or by a ficSubFilter object.	table	-	`.1.3.6.1.2.1.153.1.5`
ipspSubfiltersTable This table defines a list of filters contained within a given compound filter set defined in the ipspCompoundFilterTable.	table	-	`.1.3.6.1.2.1.153.1.6`
ipspStaticFilters	node	-	`.1.3.6.1.2.1.153.1.7`
ipspIpHeaderFilterTable This table contains a list of filter definitions to be used within the ipspRuleDefinitionTable or the ipspSubfilterTable table.	table	-	`.1.3.6.1.2.1.153.1.8`

Child Objects