ipoPhonesModuleNumber
IPO-PHONES-MIB ·
.1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.9
Object
column
SNMPv2-SMIUnsigned32
The number that the operator uses to
identify the module.
The module numbers are assigned according to the expansion
port number that it's plugged into on the Control unit.
Example: Module number '2' = Expansion unit plugged into
expansion port 2 on the Control unit.
Module number '0' is reserved for the Control unit itself.
Context
- MIB
- IPO-PHONES-MIB
- OID
.1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ipoPhonesEntry
- Table
- ipoPhonesTable
- Siblings
- 10
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ipoPhonesIndex A unique value, greater than zero, for each phone. It is
recommended that values are assigned contiguously starting
from 1. The value for each phone sub-layer must remain
consta… | column | DIFFSERV-MIBIndexInteger | .1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.1 |
| ipoPhonesIPAddress The IP Address of the phone. In network-byte order. In the usual
IP Address format - xxx.xxx.xxx.xxx.
The IP address will only be present if the phone is an IP phon… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.10 |
| ipoPhonesPhysAddress The Physical Address of the phone, such as the MAC Address.
The physical address will only be present if the phone is an IP
phone. If it is not, it will contain ze… | column | SNMPv2-TCPhysAddress | .1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.11 |
| ipoPhonesExtID The numerical logical extension entity identifier assigned to
the phone on the IP Office entity. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.2 |
| ipoPhonesExtNumber The number that should be dialed to reach this phone on the
IP Office entity. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.3 |
| ipoPhonesUserShort The short form of the name of the user of this phone which is
used in caller display. This is quite often the forename of
the user. | column | OctetString | .1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.4 |
| ipoPhonesUserLong The long form of the name of the user of this phone. This is
normally the full name (forename and surname) of the user. | column | OctetString | .1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.5 |
| ipoPhonesType The type of phone that is connected to this IP Office logical
phone extension. | column | PhoneType | .1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.6 |
| ipoPhonesPort A reference, by entPhysicalIndex value, to the
EntPhysicalEntry representing the physical port entity that
this phone entry is associated with in an entity MIB
instantiation withi… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.7 |
| ipoPhonesPortNumber The port number on the module that the operator uses to
identify the port.
The port numbers on the expansion modules will follow standard
numbering, beginning at 1… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.8 |