ipoGTEventSystemShutdownSource
IPO-MIB ·
.1.3.6.1.4.1.6889.2.2.1.2.1.20
Object
scalar
OctetString
This variable represents the source from where the system
shutdown was performed.
Possible values are:
DTE-Port
- if the system shutdown is performed using the DTE,
AUX-Button
- if the system shutdown is performed using the AUX
button (available only for IP500v2),
Phone <user name>
- if the system shutdown is performed from a phone,
Manager <security user name>
- if the system shutdown is performed from Manager,
SSA <security user name>
- if the system shutdown is performed from SSA.
Context
- MIB
- IPO-MIB
- OID
.1.3.6.1.4.1.6889.2.2.1.2.1.20- Type
- scalar
- Access
- notifyonly
- Status
- current
- Parent
- ipoGTObjects
- Siblings
- 26
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ipoGTEventSeverity deprecated Severity of the event that has occurred.
The event severity depends upon the type of
entity/notification that the operational state change event
relates to:
… | scalar | Enumeration | .1.3.6.1.4.1.6889.2.2.1.2.1.1 |
| ipoGTEventDevID A unique textual identifier of the alarming device. | scalar | OctetString | .1.3.6.1.4.1.6889.2.2.1.2.1.10 |
| ipoGTEventEntityName The textual name of the alarming physical entity. The
contents of this object is made of concatenated
entPhysicalName values that fully identify the object with the
overall IP Off… | scalar | OctetString | .1.3.6.1.4.1.6889.2.2.1.2.1.11 |
| ipoGTEventLoopbackStatusBits This variable represents the current state of the loopback on
the DS1 interface. It contains information about loopbacks
established by a manager and remotely from the far end.
… | scalar | Bits | .1.3.6.1.4.1.6889.2.2.1.2.1.12 |
| ipoGTEventQoSMonJitter IP Office QoS monitoring Received Jitter time in milliseconds. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6889.2.2.1.2.1.13 |
| ipoGTEventQoSMonRndTrip IP Office QoS monitoring Round Trip Delay time in milliseconds. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6889.2.2.1.2.1.14 |
| ipoGTEventQoSMonPktLoss IP Office QoS monitoring Received Packet Loss. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6889.2.2.1.2.1.15 |
| ipoGTEventQoSMonCallId IP Office QoS monitoring Call Identifier. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6889.2.2.1.2.1.16 |
| ipoGTEventQoSMonDevType IP Office QoS monitoring Device Type. | scalar | Enumeration | .1.3.6.1.4.1.6889.2.2.1.2.1.17 |
| ipoGTEventQoSMonDevId IP Office QoS monitoring Device Identifier. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6889.2.2.1.2.1.18 |
| ipoGTEventQoSMonExtnNo IP Office QoS monitoring Extension Number. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6889.2.2.1.2.1.19 |
| ipoGTEventDateTime Date and time of the occurence of the event. | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.6889.2.2.1.2.1.2 |
| ipoGTEventSystemShutdownTimeout This variable represents the period of time the system will be in
the shutdown state for. Possible values are in the 5 to 1440 minutes
range, 0 meaning infinite. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6889.2.2.1.2.1.21 |
| ipoGTEventMemoryCardSlotId This variable indicates a memory card physical position identifier.
System(2) and Optional(3) are valid for the IP500 V2. CF(1) valid
for the IP500. | scalar | Enumeration | .1.3.6.1.4.1.6889.2.2.1.2.1.22 |
| ipoGTEventNoValidKeyReason This variable indicates the reason no valid licence feature key is
assumed. This is also the order of importance and check precedence.
noReason(1) - cleared condition
… | scalar | Enumeration | .1.3.6.1.4.1.6889.2.2.1.2.1.23 |
| ipoGTEventReason This variable indicates what event took place within Configuration, Service, Trunk
or Link category alarm | scalar | Enumeration | .1.3.6.1.4.1.6889.2.2.1.2.1.24 |
| ipoGTEventData This variable contains opaque data that can be used to provide additional information
when the ipoGTEventReason value is not sufficient. | scalar | OctetString | .1.3.6.1.4.1.6889.2.2.1.2.1.25 |
| ipoGTEventAlarmDescription This variable describes the alarm | scalar | OctetString | .1.3.6.1.4.1.6889.2.2.1.2.1.26 |
| ipoGTEventAlarmRemedialAction This variable describes the remedial action of the alarm | scalar | OctetString | .1.3.6.1.4.1.6889.2.2.1.2.1.27 |
| ipoGTEventEntity A reference, by entPhysicalIndex value, to the
EntPhysicalEntry representing the physical entity that an
event is associated with in an entity MIB instantiation within
the IP Offi… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6889.2.2.1.2.1.3 |
| ipoGTEventLoopbackStatus deprecated This variable represents the current state of the
loopback on the DS1 interface. It contains
information about loopbacks established by a
manager and remotely from the far end.
… | scalar | Integer32 | .1.3.6.1.4.1.6889.2.2.1.2.1.4 |
| ipoGTEventAppEntity The IP Office application to which a notification/trap
relates. | scalar | Enumeration | .1.3.6.1.4.1.6889.2.2.1.2.1.5 |
| ipoGTEventAppEvent IP Office application event states. The associated event
severity of the notification/trap the object is carried in
varies depending upon the event condition. The appropriate
sev… | scalar | Enumeration | .1.3.6.1.4.1.6889.2.2.1.2.1.6 |
| ipoGTEventHostAddress Address of an IP Office Small Office Gateway Subtending Host. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6889.2.2.1.2.1.7 |
| ipoGTEventSOGMode IP Office Small Office Gateway operating modes.
survivable(1) indicates the control unit has no current host,
either through confguration error or communication failure.
subT… | scalar | Enumeration | .1.3.6.1.4.1.6889.2.2.1.2.1.8 |
| ipoGTEventStdSeverity Severity of the event that has occurred.
The event severity depends upon the type of
entity/notification that the operational state change event
relates to. The severit… | scalar | ITU-ALARM-TC-MIBItuPerceivedSeverity | .1.3.6.1.4.1.6889.2.2.1.2.1.9 |