ipoGTEventSeverity

IPO-MIB · .1.3.6.1.4.1.6889.2.2.1.2.1.1
MIB view Table view

Object

scalar deprecated Enumeration 
Severity of the event that has occurred.
          
The event severity depends upon the type of
entity/notification that the operational state change event
relates to:
          
GenEntityEvents:
          
Type of physical   Severity
entity
container          critical
module             major
port               major
          
Known transient errors for entities have a severity of minor.
          
LKSCommsEvents:
Severity is major
          
GenLoopbackEvent:
Severity is major
          
GenAppEvents:
Severity depends on sub-event
Failure/Operational - severity is major
Event               - severity depends on event condition
          
ipoGenSogEvents:
Severity depends on sub-event
HostFailure         - severity is Major
ModeChange:
  - Mode survivable: severity is Major
  - Mode subTending: severity is Minor
          
PhoneChangeEvents:
Severity is minor
          
**NOTE: This object is deprecated and replaced by
  ipoGTEventStdSeverity.

Context

MIB
IPO-MIB
OID
.1.3.6.1.4.1.6889.2.2.1.2.1.1
Type
scalar
Access
notifyonly
Status
deprecated
Parent
ipoGTObjects
Siblings
26

Syntax

Enumeration

Values & Constraints

Enumerated Values
1critical
2major
3minor

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ipoGTEventDevID
A unique textual identifier of the alarming device.
scalarOctetString.1.3.6.1.4.1.6889.2.2.1.2.1.10
ipoGTEventEntityName
The textual name of the alarming physical entity. The contents of this object is made of concatenated entPhysicalName values that fully identify the object with the overall IP Off…
scalarOctetString.1.3.6.1.4.1.6889.2.2.1.2.1.11
ipoGTEventLoopbackStatusBits
This variable represents the current state of the loopback on the DS1 interface. It contains information about loopbacks established by a manager and remotely from the far end. …
scalarBits.1.3.6.1.4.1.6889.2.2.1.2.1.12
ipoGTEventQoSMonJitter
IP Office QoS monitoring Received Jitter time in milliseconds.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6889.2.2.1.2.1.13
ipoGTEventQoSMonRndTrip
IP Office QoS monitoring Round Trip Delay time in milliseconds.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6889.2.2.1.2.1.14
ipoGTEventQoSMonPktLoss
IP Office QoS monitoring Received Packet Loss.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6889.2.2.1.2.1.15
ipoGTEventQoSMonCallId
IP Office QoS monitoring Call Identifier.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6889.2.2.1.2.1.16
ipoGTEventQoSMonDevType
IP Office QoS monitoring Device Type.
scalarEnumeration.1.3.6.1.4.1.6889.2.2.1.2.1.17
ipoGTEventQoSMonDevId
IP Office QoS monitoring Device Identifier.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6889.2.2.1.2.1.18
ipoGTEventQoSMonExtnNo
IP Office QoS monitoring Extension Number.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6889.2.2.1.2.1.19
ipoGTEventDateTime
Date and time of the occurence of the event.
scalarSNMPv2-TCDateAndTime.1.3.6.1.4.1.6889.2.2.1.2.1.2
ipoGTEventSystemShutdownSource
This variable represents the source from where the system shutdown was performed. Possible values are: DTE-Port - if the system shutdown is performed usi…
scalarOctetString.1.3.6.1.4.1.6889.2.2.1.2.1.20
ipoGTEventSystemShutdownTimeout
This variable represents the period of time the system will be in the shutdown state for. Possible values are in the 5 to 1440 minutes range, 0 meaning infinite.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6889.2.2.1.2.1.21
ipoGTEventMemoryCardSlotId
This variable indicates a memory card physical position identifier. System(2) and Optional(3) are valid for the IP500 V2. CF(1) valid for the IP500.
scalarEnumeration.1.3.6.1.4.1.6889.2.2.1.2.1.22
ipoGTEventNoValidKeyReason
This variable indicates the reason no valid licence feature key is assumed. This is also the order of importance and check precedence. noReason(1) - cleared condition …
scalarEnumeration.1.3.6.1.4.1.6889.2.2.1.2.1.23
ipoGTEventReason
This variable indicates what event took place within Configuration, Service, Trunk or Link category alarm
scalarEnumeration.1.3.6.1.4.1.6889.2.2.1.2.1.24
ipoGTEventData
This variable contains opaque data that can be used to provide additional information when the ipoGTEventReason value is not sufficient.
scalarOctetString.1.3.6.1.4.1.6889.2.2.1.2.1.25
ipoGTEventAlarmDescription
This variable describes the alarm
scalarOctetString.1.3.6.1.4.1.6889.2.2.1.2.1.26
ipoGTEventAlarmRemedialAction
This variable describes the remedial action of the alarm
scalarOctetString.1.3.6.1.4.1.6889.2.2.1.2.1.27
ipoGTEventEntity
A reference, by entPhysicalIndex value, to the EntPhysicalEntry representing the physical entity that an event is associated with in an entity MIB instantiation within the IP Offi…
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6889.2.2.1.2.1.3
ipoGTEventLoopbackStatus deprecated
This variable represents the current state of the loopback on the DS1 interface. It contains information about loopbacks established by a manager and remotely from the far end. …
scalarInteger32.1.3.6.1.4.1.6889.2.2.1.2.1.4
ipoGTEventAppEntity
The IP Office application to which a notification/trap relates.
scalarEnumeration.1.3.6.1.4.1.6889.2.2.1.2.1.5
ipoGTEventAppEvent
IP Office application event states. The associated event severity of the notification/trap the object is carried in varies depending upon the event condition. The appropriate sev…
scalarEnumeration.1.3.6.1.4.1.6889.2.2.1.2.1.6
ipoGTEventHostAddress
Address of an IP Office Small Office Gateway Subtending Host.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.6889.2.2.1.2.1.7
ipoGTEventSOGMode
IP Office Small Office Gateway operating modes. survivable(1) indicates the control unit has no current host, either through confguration error or communication failure. subT…
scalarEnumeration.1.3.6.1.4.1.6889.2.2.1.2.1.8
ipoGTEventStdSeverity
Severity of the event that has occurred. The event severity depends upon the type of entity/notification that the operational state change event relates to. The severit…
scalarITU-ALARM-TC-MIBItuPerceivedSeverity.1.3.6.1.4.1.6889.2.2.1.2.1.9