cmmTransVoltAlertThresholdMin
IPI-CMM-CHASSIS-MIB ·
.1.3.6.1.4.1.36673.100.1.2.3.1.8
Object
column
0.001 V Integer32
Min Alarm Threshold voltage of the transceiver. This is common across channels for a transceiver. '-100001' indicates unavailable. '-100002' indicates not-applicable.
Context
- MIB
- IPI-CMM-CHASSIS-MIB
- OID
.1.3.6.1.4.1.36673.100.1.2.3.1.8- Type
- column
- Access
- readonly
- Status
- current
- Units
- 0.001 V
- Parent
- cmmTransDDMEntry
- Table
- cmmTransDDMTable
- Siblings
- 49
Syntax
0.001 V Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cmmTransChannelIndex A unique value, greater than zero,for each channel in the transceiver
within the unit. For SFP transceivers, only channel '1' is applicable. | column | Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.1 |
| cmmTransVoltCriticalThresholdMin Min Critical Threshold voltage of the transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.001 V Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.10 |
| cmmTransVoltCriticalThresholdMax Max Critical Threshold voltage of the transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.001 V Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.11 |
| cmmTransLaserBiasCurrent Internally measured TX Bias Current in Channel of transceiver
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.001 mA Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.12 |
| cmmTransLaserBiasCurrAlertThresholdMin Min Alarm Threshold of Laser Bias Current per channel.
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.001 mA Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.13 |
| cmmTransLaserBiasCurrAlertThresholdMax Max Alarm Threshold of Laser Bias Current per channel.
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.001 mA Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.14 |
| cmmTransLaserBiasCurrCriticalThresholdMin Min Critical Threshold of Laser Bias Current per channel.
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.001 mA Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.15 |
| cmmTransLaserBiasCurrCriticalThresholdMax Max Critical Threshold of Laser Bias Current per channel.
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.001 mA Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.16 |
| cmmTransTxPower Measured TX output power in Channel of transceiver.
'-100000' value represents no power.
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.001 dBm Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.17 |
| cmmTransTxPowerAlertThresholdMin Min Alarm Threshold of TxOutput Power per channel.
'-100000' value represents no power.
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.001 dBm Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.18 |
| cmmTransTxPowerAlertThresholdMax Max Alarm Threshold of TxOutput Power per channel.
'-100000' value represents no power.
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.001 dBm Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.19 |
| cmmTransTemperature Internally measured temperature of the transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.01 C Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.2 |
| cmmTransTxPowerCriticalThresholdMin Min Critical Threshold of TxOutput Power per channel.
'-100000' value represents no power.
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.001 dBm Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.20 |
| cmmTransTxPowerCriticalThresholdMax Max Critical Threshold of TxOutput Power per channel.
'-100000' value represents no power.
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.001 dBm Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.21 |
| cmmTransRxPower Measured RX input power in Channel of transceiver
'-100000' value represents no power in the transceiver.
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.001 dBm Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.22 |
| cmmTransRxPowerAlertThresholdMin Min Alarm Threshold value of Rx Input Power per channel.
'-100000' value represents no power.
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.001 dBm Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.23 |
| cmmTransRxPowerAlertThresholdMax Max Alarm Threshold value of Rx Input Power per channel.
'-100000' value represents no power.
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.001 dBm Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.24 |
| cmmTransRxPowerCriticalThresholdMin Min Critical Threshold value of Rx Input Power per channel.
'-100000' value represents no power.
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.001 dBm Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.25 |
| cmmTransRxPowerCriticalThresholdMax Max Critical Threshold value of Rx Input Power per channel.
'-100000' value represents no power.
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.001 dBm Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.26 |
| cmmTransTxPowerSupported Transceiver TxPower Support | column | Enumeration | .1.3.6.1.4.1.36673.100.1.2.3.1.27 |
| cmmTransRxPowerSupported Transceiver RxPower Support | column | Enumeration | .1.3.6.1.4.1.36673.100.1.2.3.1.28 |
| cmmTransDDMStatus Transceiver DDM Status | column | Enumeration | .1.3.6.1.4.1.36673.100.1.2.3.1.29 |
| cmmTransTempAlertThresholdMin Min Alarm Threshold temperature of the transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.01 C Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.3 |
| cmmTransTxState Transceiver TX State | column | Enumeration | .1.3.6.1.4.1.36673.100.1.2.3.1.30 |
| cmmTransRxLosState Transceiver RX Los State | column | Enumeration | .1.3.6.1.4.1.36673.100.1.2.3.1.31 |
| cmmTransTxLosState Transceiver TX Los State (applicable only for QSFP). | column | Enumeration | .1.3.6.1.4.1.36673.100.1.2.3.1.32 |
| cmmTransResetState Transceiver Reset State (applicable only for QSFP). | column | Enumeration | .1.3.6.1.4.1.36673.100.1.2.3.1.33 |
| cmmTransPowerMode Transceiver Power mode (applicable only for QSFP). | column | Enumeration | .1.3.6.1.4.1.36673.100.1.2.3.1.34 |
| cmmTransXFPVoltage2 Internally measured voltage of the second available supply of the XFP transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable.
'-100002' ind… | column | 0.001 V Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.35 |
| cmmTransXFPVolt2AlertThresholdMin The minimum warning threshold of the second available voltage of the XFP transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable.
'-100002' … | column | 0.001 V Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.36 |
| cmmTransXFPVolt2AlertThresholdMax The maximum warning threshold of the second available voltage of the XFP transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable.
'-100002' … | column | 0.001 V Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.37 |
| cmmTransXFPVolt2CriticalThresholdMin The minimum critical threshold of the second available voltage of the XFP transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable.
'-100002'… | column | 0.001 V Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.38 |
| cmmTransXFPVolt2CriticalThresholdMax The maximum critical threshold of the second available voltage of the XFP transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable.
'-100002'… | column | 0.001 V Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.39 |
| cmmTransTempAlertThresholdMax Max Alarm Threshold temperature of the transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.01 C Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.4 |
| cmmTransFrequencyError Transceiver Frequency Error.
'-100001' indicates unavailable
'-100002' indicates not-applicable. | column | 0.01 GHZ Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.40 |
| cmmTransFrequencyErrorAlertThresholdMin The minimum alert threshold for transceiver frequency-error.
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.01 GHz Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.41 |
| cmmTransFrequencyErrorAlertThresholdMax The maximum alert threshold for transceiver frequency-error.
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.01 GHz Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.42 |
| cmmTransFrequencyErrorCriticalThresholdMin The miniimum critical threshold for transceiver frequency-error.
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.01 GHz Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.43 |
| cmmTransFrequencyErrorCriticalThresholdMax The maximum critical threshold for transceiver frequency-error.
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.01 GHz Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.44 |
| cmmTransWavelengthError Transceiver Wavelength Error.
'-100001' indicates unavailable
'-100002' indicates not-applicable. | column | 0.00001 nm Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.45 |
| cmmTransWavelengthErrorAlertThresholdMin The minimum alert threshold for transceiver wavelength-error.
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.00001 nm Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.46 |
| cmmTransWavelengthErrorAlertThresholdMax The maximum alert threshold for transceiver wavelength-error.
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.00001 nm Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.47 |
| cmmTransWavelengthErrorCriticalThresholdMin The minimum critical threshold for transceiver wavelength-error.
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.00001 nm Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.48 |
| cmmTransWavelengthErrorCriticalThresholdMax The maximum critical threshold for transceiver wavelength-error.
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.00001 nm Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.49 |
| cmmTransTempCriticalThresholdMin Min Critical Threshold temperature of the transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.01 C Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.5 |
| cmmTransCurrentStatus Bitmap of supported paramaters of TSFP Current status.
0 - not supported (values only for information)
1 - supported (values can be used for monitoring). | column | Bits | .1.3.6.1.4.1.36673.100.1.2.3.1.50 |
| cmmTransTempCriticalThresholdMax Max Critical Threshold temperature of the transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.01 C Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.6 |
| cmmTransVoltage Internally measured supply voltage of the transceiver.
This is common across channels for a transceiver.
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.001 V Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.7 |
| cmmTransVoltAlertThresholdMax Max Alarm Threshold voltage of the transceiver in Volts.
This is common across channels for a transceiver.
'-100001' indicates unavailable.
'-100002' indicates not-applicable. | column | 0.001 V Integer32 | .1.3.6.1.4.1.36673.100.1.2.3.1.9 |