esModemRxFreq
IPE-COMMON-MIB ·
.1.3.6.1.4.1.119.2.3.69.501.4.2.1.4
Object
column
r/w
OctetString
Rx RF Frequency.
Context
- MIB
- IPE-COMMON-MIB
- OID
.1.3.6.1.4.1.119.2.3.69.501.4.2.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- esModemEntry
- Table
- esModemTable
- Siblings
- 42
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-9
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| esModemIfIndex Index of this table. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.1 |
| esModemAmrRangeQPSK AMR Range (QPSK).
When this parameter changes, the agent will adjust the E1/RST
mappings according to this parameter. And the XCs whose channel
number is exceeded to the E1/RST ma… | column | OffOnValue | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.10 |
| esModemAmrRange16QAM AMR Ragne (16QAM).
When this parameter changes, the agent will adjust the E1/RST
mappings according to this parameter. And the XCs whose channel
number is exceeded to the E1/RST m… | column | OffOnValue | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.11 |
| esModemAmrRange32QAM AMR Range (32QAM).
When this parameter changes, the agent will adjust the E1/RST
mappings according to this parameter. And the XCs whose channel
number is exceeded to the E1/RST m… | column | OffOnValue | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.12 |
| esModemAmrRange64QAM AMR Range (64QAM).
When this parameter changes, the agent will adjust the E1/RST
mappings according to this parameter. And the XCs whose channel
number is exceeded to the E1/RST m… | column | OffOnValue | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.13 |
| esModemAmrRange128QAM AMR Range (128QAM).
When this parameter changes, the agent will adjust the E1/RST
mappings according to this parameter. And the XCs whose channel
number is exceeded to the E1/RST … | column | OffOnValue | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.14 |
| esModemAmrRange256QAM AMR Range (256QAM).
When this parameter changes, the agent will adjust the E1/RST
mappings according to this parameter. And the XCs whose channel
number is exceeded to the E1/RST … | column | OffOnValue | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.15 |
| esModemConfiguration This object configure the MODEM usage. When the object is set to
'notUsed', the corresponding modem will be disabled.
This function is available only for the iPASOLINK200. | column | Enumeration | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.16 |
| esModemGroupSetting Radio Traffic Aggregation. The modem ports whose
'esModemGroupSetting' has same value construct the Radio Link
Aggregation.
This configuration is automatically cleared when the SW… | column | Enumeration | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.17 |
| esModemRadioMode Radio Mode.
When this parameter changes, the agent will adjust the E1/RST
mappings according to this parameter. And the XCs whose channel
number is exceeded to the E1/RST mapping … | column | Enumeration | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.18 |
| esTdmEtherMapping E1 Mapping. This object configures the E1 channel count which is
mapped to the radio link.
When this parameter changes, the agent will adjust the E1/RST
mappings according to this… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.19 |
| esModemNEAddress reserved. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.2 |
| esTdmEtherMappingAmrQPSK E1 Mapping (QPSK). This object configures the E1 channel count
which is mapped to the radio link running on QPSK on the AMR
mode.
When this parameter changes, the agent will adjus… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.20 |
| esTdmEtherMappingAmr16QAM E1 Mapping (16QAM). This object configures the E1 channel count
which is mapped to the radio link running on 16QAM on the AMR
mode.
When this parameter changes, the agent will adj… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.21 |
| esTdmEtherMappingAmr32QAM E1 Mapping (32QAM). This object configures the E1 channel count
which is mapped to the radio link running on 32QAM on the AMR
mode.
When this parameter changes, the agent will adj… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.22 |
| esTdmEtherMappingAmr64QAM E1 Mapping (64QAM). This object configures the E1 channel count
which is mapped to the radio link running on 64QAM on the AMR
mode.
When this parameter changes, the agent will adj… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.23 |
| esTdmEtherMappingAmr128QAM E1 Mapping (128QAM). This object configures the E1 channel count
which is mapped to the radio link running on 128QAM on the AMR
mode.
When this parameter changes, the agent will a… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.24 |
| esTdmEtherMappingAmr256QAM E1 Mapping (256QAM). This object configures the E1 channel count
which is mapped to the radio link running on 256QAM on the AMR
mode.
When this parameter changes, the agent will a… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.25 |
| esTdmEtherMappingRst STM-1 Mapping. This object configures the STM-1 channel count
which is mapped to the radio link.
When this parameter changes, the agent will adjust the E1/RST
mappings according t… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.26 |
| esTdmEtherMappingRstAmrQPSK STM-1 Mapping (QPSK). This object configures the STM-1 channel
count which is mapped to the radio link running on QPSK on the
AMR mode.
When this parameter changes, the agent will… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.27 |
| esTdmEtherMappingRstAmr16QAM STM-1 Mapping (16QAM). This object configures the STM-1 channel
count which is mapped to the radio link running on 16QAM on the
AMR mode.
When this parameter changes, the agent wi… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.28 |
| esTdmEtherMappingRstAmr32QAM STM-1 Mapping (32QAM). This object configures the STM-1 channel
count which is mapped to the radio link running on 32QAM on the
AMR mode.
When this parameter changes, the agent wi… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.29 |
| esModemTxFreq Tx RF Frequency. | column | OctetString | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.3 |
| esTdmEtherMappingRstAmr64QAM STM-1 Mapping (64QAM). This object configures the STM-1 channel
count which is mapped to the radio link running on 64QAM on the
AMR mode.
When this parameter changes, the agent wi… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.30 |
| esTdmEtherMappingRstAmr128QAM STM-1 Mapping (128QAM). This object configures the STM-1 channel
count which is mapped to the radio link running on 128QAM on the
AMR mode.
When this parameter changes, the agent … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.31 |
| esTdmEtherMappingRstAmr256QAM STM-1 Mapping (256QAM). This object configures the STM-1 channel
count which is mapped to the radio link running on 256QAM on the
AMR mode.
When this parameter changes, the agent … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.32 |
| esModemAmrRange512QAM AMR Range (512QAM).
When this parameter changes, the agent will adjust the E1/RST
mappings according to this parameter. And the XCs whose channel
number is exceeded to the E1/RST … | column | OffOnValue | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.33 |
| esModemAmrRange1024QAM AMR Range (1024QAM).
When this parameter changes, the agent will adjust the E1/RST
mappings according to this parameter. And the XCs whose channel
number is exceeded to the E1/RST… | column | OffOnValue | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.34 |
| esTdmEtherMappingAmr512QAM E1 Mapping (512QAM). This object configures the E1 channel count
which is mapped to the radio link running on 512QAM on the AMR
mode.
When this parameter changes, the agent will a… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.35 |
| esTdmEtherMappingAmr1024QAM E1 Mapping (1024QAM). This object configures the E1 channel
count which is mapped to the radio link running on 1024QAM on the
AMR mode.
When this parameter changes, the agent will… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.36 |
| esTdmEtherMappingRstAmr512QAM STM-1 Mapping (512QAM). This object configures the STM-1 channel
count which is mapped to the radio link running on 512QAM on the
AMR mode.
When this parameter changes, the agent … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.37 |
| esTdmEtherMappingRstAmr1024QAM STM-1 Mapping (1024QAM). This object configures the STM-1
channel count which is mapped to the radio link running on
1024QAM on the AMR mode.
When this parameter changes, the agen… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.38 |
| esModemGroupMode Configure Radio Traffic Aggregation Mode.
When the 'normal' mode aggregation is configured, Ethernet frames
are distributed to the multiple radio links based on usual Link
aggrega… | column | Enumeration | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.39 |
| esModemAmrRange2048QAM AMR Range (2048QAM).
When this parameter changes, the agent will adjust the E1/RST
mappings according to this parameter. And the XCs whose channel
number is exceeded to the E1/RST… | column | OffOnValue | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.40 |
| esTdmEtherMappingAmr2048QAM E1 Mapping (2048QAM). This object configures the E1 channel
count which is mapped to the radio link running on 2048QAM on the
AMR mode.
When this parameter changes, the agent will… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.41 |
| esTdmEtherMappingRstAmr2048QAM STM-1 Mapping (2048QAM). This object configures the STM-1
channel count which is mapped to the radio link running on
2048QAM on the AMR mode.
When this parameter changes, the agen… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.42 |
| esModemEthTransparentClockPath This object configures the bandwidth for Transparent Clock path.
The configuration step is 0 (notUsed), 2, 4, 8 Mbps. | column | Mbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.43 |
| esModemTxPowerCont Tx Power Control. | column | Enumeration | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.5 |
| esModemFrameID Frame ID. | column | Integer32 | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.6 |
| esModemModulation Reference Modulation.
If the provisioned card does not support the specified modulation
or the installed license is not enough, the agent will reject the
request.
When this parame… | column | Enumeration | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.7 |
| esModemChSpacing Channel Spacing.
If the card does not support the specified parameter, the agent
will reject the request.
When this parameter changes, the agent will adjust the E1/RST
mappings ac… | column | Enumeration | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.8 |
| esModemAmrOperation AMR Operation.
When this parameter changes, the agent will adjust the E1/RST
mappings according to this parameter. And the XCs whose channel
number is exceeded to the E1/RST mappi… | column | OffOnValue | .1.3.6.1.4.1.119.2.3.69.501.4.2.1.9 |