ipadAtmVccRemoteUnitId
IPAD-ATM-MIB ·
.1.3.6.1.4.1.321.100.1.25.3.1.1.17
Object
column
SNMPv2-TCDisplayString
The Unit ID assigned to the devie connected to the remote end of this VCC.
Context
- MIB
- IPAD-ATM-MIB
- OID
.1.3.6.1.4.1.321.100.1.25.3.1.1.17- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ipadAtmVccTableEntry
- Table
- ipadAtmVccTable
- Siblings
- 39
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ipadAtmVccIndex The index into the ATM VCC table, corresponding to ifIndex. | column | Integer32 | .1.3.6.1.4.1.321.100.1.25.3.1.1.1 |
| ipadAtmVccFramesReceived The number of frames received by this device. | column | Integer32 | .1.3.6.1.4.1.321.100.1.25.3.1.1.10 |
| ipadAtmVccRemoteDataOffered The number of data bytes offered by the remote device. | column | Integer32 | .1.3.6.1.4.1.321.100.1.25.3.1.1.11 |
| ipadAtmVccDataReceived The number of data bytes received by this device. | column | Integer32 | .1.3.6.1.4.1.321.100.1.25.3.1.1.12 |
| ipadAtmVccRemoteActive The current state of the remote device as detected by the local device. | column | Enumeration | .1.3.6.1.4.1.321.100.1.25.3.1.1.13 |
| ipadAtmVccRemoteVpi The remote VPI. | column | Integer32 | .1.3.6.1.4.1.321.100.1.25.3.1.1.14 |
| ipadAtmVccRemoteVci The remote VCI. | column | Integer32 | .1.3.6.1.4.1.321.100.1.25.3.1.1.15 |
| ipadAtmVccRemoteIPAddress The IP Address of the device connected to the remote end of this VCC. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.321.100.1.25.3.1.1.16 |
| ipadAtmVccEtoeLoopbackCommand A command to issue on the VCC Loopback.
The start command is used to start an OAM F5 VCC loopback.
The stop command is used to terminate the OAM loopback.
The statistics variables… | column | Enumeration | .1.3.6.1.4.1.321.100.1.25.3.1.1.18 |
| ipadAtmVccEtoeLoopbackState The state of this VCC loopback function.
The active state means OAM F5 loopback cells are being
sent from this endpoint once every 5 seconds.
The loopback state means that OAM F5 … | column | Enumeration | .1.3.6.1.4.1.321.100.1.25.3.1.1.19 |
| ipadAtmVccVpiIndex The VPI for the VCC. | column | Integer32 | .1.3.6.1.4.1.321.100.1.25.3.1.1.2 |
| ipadAtmVccEtoeLoopbackCellsTx The number of OAM F5 Loopback cells transmitted
for this VCC. | column | Integer32 | .1.3.6.1.4.1.321.100.1.25.3.1.1.20 |
| ipadAtmVccEtoeLoopbackCellsRx The number of OAM F5 Loopback cells received
for this VCC. | column | Integer32 | .1.3.6.1.4.1.321.100.1.25.3.1.1.21 |
| ipadAtmVccEtoeLoopbackRttMin The minimum round trip time in milliseconds
between sending a loopback cell and receiving
the returned loopback cell. | column | Integer32 | .1.3.6.1.4.1.321.100.1.25.3.1.1.22 |
| ipadAtmVccEtoeLoopbackRttMax The maximum round trip time in milliseconds
between sending a loopback cell and receiving
the returned loopback cell. | column | Integer32 | .1.3.6.1.4.1.321.100.1.25.3.1.1.23 |
| ipadAtmVccEtoeLoopbackRttAvg The average round trip time in milliseconds
between sending a loopback cell and receiving
the returned loopback cell. | column | Integer32 | .1.3.6.1.4.1.321.100.1.25.3.1.1.24 |
| ipadAtmVccSegLoopbackCommand A command to issue on the VCC Loopback.
The start command is used to start an OAM F5 VCC loopback.
The stop command is used to terminate the OAM loopback.
The statistics variables… | column | Enumeration | .1.3.6.1.4.1.321.100.1.25.3.1.1.25 |
| ipadAtmVccSegLoopbackState The state of this VCC loopback function.
The active state means OAM F5 loopback cells are being
sent from this endpoint once every 5 seconds.
The loopback state means that OAM F5 … | column | Enumeration | .1.3.6.1.4.1.321.100.1.25.3.1.1.26 |
| ipadAtmVccSegLoopbackCellsTx The number of OAM F5 Loopback cells transmitted
for this VCC. | column | Integer32 | .1.3.6.1.4.1.321.100.1.25.3.1.1.27 |
| ipadAtmVccSegLoopbackCellsRx The number of OAM F5 Loopback cells received
for this VCC. | column | Integer32 | .1.3.6.1.4.1.321.100.1.25.3.1.1.28 |
| ipadAtmVccSegLoopbackRttMin The minimum round trip time in milliseconds
between sending a loopback cell and receiving
the returned loopback cell. | column | Integer32 | .1.3.6.1.4.1.321.100.1.25.3.1.1.29 |
| ipadAtmVccVciIndex The VCI for the VCC. | column | Integer32 | .1.3.6.1.4.1.321.100.1.25.3.1.1.3 |
| ipadAtmVccSegLoopbackRttMax The maximum round trip time in milliseconds
between sending a loopback cell and receiving
the returned loopback cell. | column | Integer32 | .1.3.6.1.4.1.321.100.1.25.3.1.1.30 |
| ipadAtmVccSegLoopbackRttAvg The average round trip time in milliseconds
between sending a loopback cell and receiving
the returned loopback cell. | column | Integer32 | .1.3.6.1.4.1.321.100.1.25.3.1.1.31 |
| ipadAtmVccEtoeContCheckCommand ipadAtmVccEtoeContCheckCommand is used to request
activation or deactivation of the End-to-End continuity check
on this VCC. | column | Enumeration | .1.3.6.1.4.1.321.100.1.25.3.1.1.32 |
| ipadAtmVccEtoeContCheckAutoActivate ipadAtmVccEtoeContCheckAutoActivate indicates whether
End-to-End continuity check is automatically activated on this VCC.
A Value of disable means CC is not automatically activate… | column | Enumeration | .1.3.6.1.4.1.321.100.1.25.3.1.1.33 |
| ipadAtmVccEtoeContCheckType Default Continuity Check Type used for this VCC.
A value of none selects no continuity check.
A value of sink, source, or sinkAndSource selects the respective
continuity check fun… | column | Enumeration | .1.3.6.1.4.1.321.100.1.25.3.1.1.34 |
| ipadAtmVccEtoeContCheckTypeInUse The current Continuity Check Type in use for this VCC.
ipadAtmVccEtoeContCheckTypeInUse may differ from
ipadAtmVccEtoeContCheckType if CC is activated via inband OAM. | column | Enumeration | .1.3.6.1.4.1.321.100.1.25.3.1.1.35 |
| ipadAtmVccEtoeContCheckStatus The current state of Continuity Check for this VCC.
In the ready state, no CC is being performed.
The ready state indicates CC is permitted to be activated.
The activating state i… | column | Enumeration | .1.3.6.1.4.1.321.100.1.25.3.1.1.36 |
| ipadAtmVccEtoeContCheckCellsTx The number of CC cells transmitted for this VCC for
CC Sourcing function. | column | Integer32 | .1.3.6.1.4.1.321.100.1.25.3.1.1.37 |
| ipadAtmVccEtoeContCheckCellsRx The number of CC cells received for this VCC for
the CC Sinking function. | column | Integer32 | .1.3.6.1.4.1.321.100.1.25.3.1.1.38 |
| ipadAtmVccEtoeAisStatus The current e-t-e_VC-AIS state. | column | Enumeration | .1.3.6.1.4.1.321.100.1.25.3.1.1.39 |
| ipadAtmVccEncapsulationType The encapsulation method used on this VCC.
vcMux indicates null encapsulation and may be used
for IP routing or PPP applications.
llcMux indicates LLC encapsulation and may be use… | column | Enumeration | .1.3.6.1.4.1.321.100.1.25.3.1.1.4 |
| ipadAtmVccEtoeRdiStatus The current e-t-e_VC-RDI state. | column | Enumeration | .1.3.6.1.4.1.321.100.1.25.3.1.1.40 |
| ipadAtmVccTrafficType The traffic type of this VCC. | column | Enumeration | .1.3.6.1.4.1.321.100.1.25.3.1.1.5 |
| ipadAtmVccChannelRate The channel rate for this VCC. | column | Integer32 | .1.3.6.1.4.1.321.100.1.25.3.1.1.6 |
| ipadAtmVccAlarmReset Reset the alarms or statistics of this VCC. | column | Enumeration | .1.3.6.1.4.1.321.100.1.25.3.1.1.7 |
| ipadAtmVccSLATimer The time in seconds between SLA measurement packets being sent. | column | Integer32 | .1.3.6.1.4.1.321.100.1.25.3.1.1.8 |
| ipadAtmVccRemoteFramesOffered The number of frames offered by the remote device. | column | Integer32 | .1.3.6.1.4.1.321.100.1.25.3.1.1.9 |