oduClientCtpFacTimDetMode
INFINERA-TP-ODUCLIENTCTP-MIB ·
.1.3.6.1.4.1.21296.2.2.2.2.23.1.1.28
Object
column
r/w
Enumeration
This attribute is used to configure if the TIM-S alarm shall be reported on mismatch of Expected and Received TTI message. The following are the values and their meaning: OFF: TIM-S is not reported. DAPI: TIM-S is reported only if the DAPI message mismatch occurs. SAPI: TIM-S is reported only if the SAPI message mismatch occurs. DAPISAPI: Either the DAPI or the SAPI messages are in a mis- match state.
Context
- MIB
- INFINERA-TP-ODUCLIENTCTP-MIB
- OID
.1.3.6.1.4.1.21296.2.2.2.2.23.1.1.28- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- oduClientCtpEntry
- Table
- oduClientCtpTable
- Siblings
- 79
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | off |
2 | sapi |
3 | dapi |
4 | sapidapi |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| oduClientCtpServiceMode The Service Mode (SM) of the ODU client CTP (i.e., the mode/type of service in which
this ODU client CTP is being used,). | column | INFINERA-TC-MIBInfnServiceMode | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.1 |
| oduClientCtpFacReceivedTTI The TTI message received from the Facility side (e.g., in the Trib to Term direction) of an OTU Trib Interface. | column | OctetString | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.10 |
| oduClientCtpTermReceivedTTI The TTI message received from the Terminal side (e.g., in the Line to Trib direction) of an ODU Trib Interface. | column | OctetString | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.11 |
| oduClientCtpRxEb15MinutesTce Number of Error Block in received direction during 15 minutes interval. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.12 |
| oduClientCtpTxEb15MinutesTce Number of Error Block in transmitted direction during 15 minutes interval. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.13 |
| oduClientCtpRxEbDayTce Number of Error Block in received direction during 24 hours interval. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.14 |
| oduClientCtpTxEbDayTce Number of Error Block in transmitted direction during 24 hours interval. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.15 |
| oduClientCtpRxDs15MinutesTce Number of Defect Seconds in received direction during 15 minutes interval. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.16 |
| oduClientCtpTxDs15MinutesTce Number of Defect Seconds in transmitted direction during 15 minutes interval. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.17 |
| oduClientCtpRxDsDayTce Number of Defect Seconds in received direction during 24 hours interval. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.18 |
| oduClientCtpTxDsDayTce Number of Defect Seconds in transmitted direction during 24 hours interval. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.19 |
| oduClientCtpServiceModeQualifier The Service Mode Qualifier (SMQ) of the ODU client CTP
(i.e., the mode/type of service in which this ODU client CTP is being used,). | column | INFINERA-TC-MIBInfnSMQ | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.2 |
| oduClientCtpRxEbDayTceReporting Flag that enables/disables the reporting of RxEbDayTce threshold crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.20 |
| oduClientCtpRxEb15MinutesTceReporting Flag that enables/disables the reporting of RxEb15MinutesTce threshold crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.21 |
| oduClientCtpTxEbDayTceReporting Flag that enables/disables the reporting of TxEbDayTce threshold crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.22 |
| oduClientCtpTxEb15MinutesTceReporting Flag that enables/disables the reporting of TxEb15MinutesTce threshold crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.23 |
| oduClientCtpRxDsDayTceReporting Flag that enables/disables the reporting of RxDsDayTce threshold crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.24 |
| oduClientCtpRxDs15MinutesTceReporting Flag that enables/disables the reporting of RxDs15MinutesTce threshold crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.25 |
| oduClientCtpTxDsDayTceReporting Flag that enables/disables the reporting of RxDsDayTce threshold crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.26 |
| oduClientCtpTxDs15MinutesTceReporting Flag that enables/disables the reporting of RxDs15MinutesTce threshold crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.27 |
| oduClientCtpTermTimDetMode This attribute is used to configure if the TIM-S alarm shall be reported on mismatch of Expected and Received TTI
message (on Terminal side). The following are the values and thei… | column | Enumeration | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.29 |
| oduClientCtpFacMonitoringMode Allowed Section Monitoring / Path Monitoring / TCM Attribute Value(s)
(For side corresponding to MonitoringMode) (Fac-Side/Term-Side). | column | INFINERA-TC-MIBInfnMonitoringMode | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.3 |
| oduClientCtpTcmList List of active tandem connection monitoring points (list of (contained) ODUkT
CTP objects). The default of NONE(BITS 0) implies that none of the TCM fields are in use
no contained… | column | INFINERA-TC-MIBInfnTcmList | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.30 |
| oduClientCtpConfiguredServiceType The ODU Service type that is configured on this generic OduClientCtp managed object. | column | INFINERA-TC-MIBInfnServiceType | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.31 |
| oduClientCtpTamType obsolete The equipment type where this ODU client is residing. | column | INFINERA-TC-MIBInfnEqptType | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.32 |
| oduClientCtpFacPmHistStatsEnable Flag to enable or disable the collection of PMs on the Facility side of ODU Clients | column | INFINERA-TC-MIBInfnEnableDisable | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.33 |
| oduClientCtpTermPmHistStatsEnable Flag to enable or disable the collection of PMs on the Terminal side of ODU Clients. | column | INFINERA-TC-MIBInfnEnableDisable | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.34 |
| oduClientCtpAlarmReportControl The Alarm Reporting Control Flag for the ODU Clients. | column | INFINERA-TC-MIBInfnArc | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.35 |
| oduClientCtpSupportingCircuitIdList The Supporting Circuit ID List that is this client is using. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.36 |
| oduClientCtpFacDSThreshold This attribute indicates the Facility-side threshold level for declaring a performance monitoring (PM)
Second to be bad. A PM Second is declared bad if the percentage of detected … | column | Integer32 | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.37 |
| oduClientCtpTermDSThreshold This attribute indicates the Terminal side (e.g., Line side) threshold level for declaring a
performance monitoring (PM) Second to be bad. A PM Second is declared bad if the perc… | column | Integer32 | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.38 |
| oduClientCtpTermMonitoringMode Allowed Section Monitoring / Path Monitoring / TCM Attribute Value(s)
(For side corresponding to MonitoringMode) (Fac-Side/Term-Side). | column | INFINERA-TC-MIBInfnMonitoringMode | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.39 |
| oduClientCtpFacTxTTI The TTI message that needs to be transmitted in the Facility direction (e.g., from Line to Trib direction).
This message is inserted based on appropriate setting of FacMonitoring… | column | OctetString | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.4 |
| oduClientCtpRxBei15MinutesTce Number of Error Block in received direction during 15 minutes interval. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.40 |
| oduClientCtpTxBei15MinutesTce Number of Error Block in transmitted direction during 15 minutes interval. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.41 |
| oduClientCtpRxBeiDayTce Number of Error Block in received direction during 24 hours interval. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.42 |
| oduClientCtpTxBeiDayTce Number of Error Block in transmitted direction during 24 hours interval. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.43 |
| oduClientCtpRxBeiDayTceReporting Flag that enables/disables the reporting of RxEbDayTce threshold crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.44 |
| oduClientCtpRxBei15MinutesTceReporting Flag that enables/disables the reporting of RxEb15MinutesTce threshold crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.45 |
| oduClientCtpTxBeiDayTceReporting Flag that enables/disables the reporting of TxEbDayTce threshold crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.46 |
| oduClientCtpTxBei15MinutesTceReporting Flag that enables/disables the reporting of TxEb15MinutesTce threshold crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.47 |
| oduClientCtpTSCount | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.48 |
| oduClientCtprate . | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.49 |
| oduClientCtpFacExpectedSAPI The Source Access Point Identifier that is expected from the Facility side (e.g., Trib to Line direction). | column | OctetString | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.5 |
| oduClientCtpTributaryPortNumber | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.50 |
| oduClientCtpExpectedTPNs | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.51 |
| oduClientCtpDetectedTPNs | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.52 |
| oduClientCtpuserConfigured obsolete | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.53 |
| oduClientCtpsupportingOPUTributarySlots | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.54 |
| oduClientCtpavailableOPUTributarySlots | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.55 |
| oduClientCtpdatarate | column | INFINERA-TC-MIBInfnRate | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.56 |
| oduClientCtpCrossConnectType | column | INFINERA-TC-MIBInfnXconType | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.57 |
| oduClientCtpSupportingTP | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.58 |
| oduClientCtpTsg | column | INFINERA-TC-MIBInfnTsgType | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.59 |
| oduClientCtpFacExpectedDAPI The Destination Access Point Identifier that is expected from the Facility side(e.g., Trib to Line direction). | column | OctetString | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.6 |
| oduClientCtpExpectedPayload | column | INFINERA-TC-MIBInfnServiceType | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.60 |
| oduClientCtpLoopBack Flag to enable the loopback. | column | Enumeration | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.61 |
| oduClientCtpFacSDThreshold This attribute indicates the Facility-side (e.g., Trib-side/Client-side) threshold level for declaring a
Degraded Signal defect. A Degraded Signal defect shall be declared if SDTh… | column | Integer32 | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.62 |
| oduClientCtpFacPrbsGenMode | column | INFINERA-TC-MIBInfnEnableDisable | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.63 |
| oduClientCtpFacPrbsMonMode | column | INFINERA-TC-MIBInfnEnableDisable | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.64 |
| oduClientCtpTermPrbsGenMode | column | INFINERA-TC-MIBInfnEnableDisable | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.65 |
| oduClientCtpTermPrbsMonMode | column | INFINERA-TC-MIBInfnEnableDisable | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.66 |
| oduClientCtpDetectedPayloadType | column | INFINERA-TC-MIBInfnServiceType | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.67 |
| oduClientCtpFacDMPELatencyMode | column | INFINERA-TC-MIBInfnNwLatencyMeasurementMode | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.68 |
| oduClientCtpFacDMPSLatencyMode | column | INFINERA-TC-MIBInfnNwLatencyMeasurementMode | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.69 |
| oduClientCtpTermTxTTI The TTI message that needs to be transmitted in the Terminal direction (e.g., from Trib to Line direction). This message
is inserted based on appropriate setting of TermMonitoring… | column | OctetString | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.7 |
| oduClientCtpTermDMPELatencyMode | column | INFINERA-TC-MIBInfnNwLatencyMeasurementMode | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.70 |
| oduClientCtpTermDMPSLatencyMode | column | INFINERA-TC-MIBInfnNwLatencyMeasurementMode | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.71 |
| oduClientCtpFacDMPELatHighThreshold | column | INFINERA-TC-MIBFloatTenths | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.72 |
| oduClientCtpFacDMPELatLowThreshold | column | INFINERA-TC-MIBFloatTenths | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.73 |
| oduClientCtpTermDMPELatHighThreshold | column | INFINERA-TC-MIBFloatTenths | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.74 |
| oduClientCtpTermDMPELatLowThreshold | column | INFINERA-TC-MIBFloatTenths | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.75 |
| oduClientCtpFacDMPSLatHighThreshold | column | INFINERA-TC-MIBFloatTenths | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.76 |
| oduClientCtpFacDMPSLatLowThreshold | column | INFINERA-TC-MIBFloatTenths | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.77 |
| oduClientCtpTermDMPSLatHighThreshold | column | INFINERA-TC-MIBFloatTenths | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.78 |
| oduClientCtpTermDMPSLatLowThreshold | column | INFINERA-TC-MIBFloatTenths | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.79 |
| oduClientCtpTermExpectedSAPI The Source Access Point Identifier that is expected from the Terminal side (e.g., in the Line to Trib direction). | column | OctetString | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.8 |
| oduClientCtpDetectedTPNList | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.80 |
| oduClientCtpTermExpectedDAPI The Destination Access Point Identifier that is expected from the Terminal side (e.g., in the Line to Trib direction). | column | OctetString | .1.3.6.1.4.1.21296.2.2.2.2.23.1.1.9 |