ethernetInterfaceLAA

IMM-MIB · .1.3.6.1.4.1.2.3.51.3.3.4.1.1.8
MIB view Table view

Object

scalar mandatory r/w OctetString 
Specifies the locally administered MAC address.  The locally administered
address must be a hexadecimal value between 000000000000 - FFFFFFFFFFFF.  This 
value must be in the form XX:XX:XX:XX:XX:XX where 'X' is a number between 0 - 9 and
A - F.  This IMM subsystem does not allow use of a multicast address.  A multicast
address has the least significant bit of the first byte set to a 1.  The first
byte must, therefore, be an even number.

Context

MIB
IMM-MIB
OID
.1.3.6.1.4.1.2.3.51.3.3.4.1.1.8
Type
scalar
Access
readwrite
Status
mandatory
Parent
ethernetInterface
Siblings
15

Syntax

OctetString

Values & Constraints

Object Constraints
range: 17-17

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ethernetInterfaceType mandatory
The type of interface. Indicates 'Ethernet-1'.
scalarOctetString.1.3.6.1.4.1.2.3.51.3.3.4.1.1.1
ethernetInterfaceGatewayIPAddress mandatory
Contains the IP address of the gateway/router for the ethernet interface.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.2.3.51.3.3.4.1.1.10
ethernetInterfaceBIA mandatory
Specifies the burned-in MAC (BIA) address.
scalarOctetString.1.3.6.1.4.1.2.3.51.3.3.4.1.1.11
ethernetInterfaceMTU mandatory
Contains the Maximum Transmission Unit(MTU) for the ethernet interface
scalarInteger32.1.3.6.1.4.1.2.3.51.3.3.4.1.1.12
ethernetInterfaceSubnetMask mandatory
Contains the Subnet Mask for the ethernet interface
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.2.3.51.3.3.4.1.1.13
dhcpEthernetInterfacenode-.1.3.6.1.4.1.2.3.51.3.3.4.1.1.14
ethernetInterfaceVlan mandatory
If this is enabled, assign VLAN ID needs to be assigned. NOTE: This is not supported on blades.
scalarEnumeration.1.3.6.1.4.1.2.3.51.3.3.4.1.1.15
ethernetInterfaceVlanID mandatory
Contains the VLAN ID for the ethernet interface. NOTE: This is not supported in blades.
scalarInteger32.1.3.6.1.4.1.2.3.51.3.3.4.1.1.16
ethernetInterfaceEnabled mandatory
Disable or enable the interface. Note: To alter any of the configuration settings for the ethernet interface the following procedure should be used: (1)This object sh…
scalarEnumeration.1.3.6.1.4.1.2.3.51.3.3.4.1.1.2
ethernetInterfaceHostName mandatory
Contains the 64 byte null terminated DNS host name for this interface.
scalarOctetString.1.3.6.1.4.1.2.3.51.3.3.4.1.1.3
ethernetInterfaceIPAddress mandatory
Contains the IP address for the ethernet interface.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.2.3.51.3.3.4.1.1.4
ethernetInterfaceAutoNegotiate mandatory
If this is enabled, then we should ignore Speed/Duplex.
scalarEnumeration.1.3.6.1.4.1.2.3.51.3.3.4.1.1.5
ethernetInterfaceDataRate mandatory
Specifies the data transfer rate to be used over the ethernet interface 10Mb/100Mb/Auto. Note that the value of this variable is ignored if ethernetInterfaceAutoNegotiate is set …
scalarEnumeration.1.3.6.1.4.1.2.3.51.3.3.4.1.1.6
ethernetInterfaceDuplexSetting mandatory
Specifies the duplex settings for the data transfer rate to be used over the ethernet interface Half/Full/Auto.
scalarEnumeration.1.3.6.1.4.1.2.3.51.3.3.4.1.1.7
ethernetInterfaceDhcpEnabled mandatory
Disable or enable DHCP on this interface.
scalarEnumeration.1.3.6.1.4.1.2.3.51.3.3.4.1.1.9