sysAlarmClearEnable
IES5206-TRAPS-MIB ·
.1.3.6.1.4.1.890.1.5.13.13.19.4.2
Object
notification
Alarm clear is activated.
Context
- MIB
- IES5206-TRAPS-MIB
- OID
.1.3.6.1.4.1.890.1.5.13.13.19.4.2- Type
- notification
- Status
- current
- Parent
- systrap
- Siblings
- 30
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sysMacAntiSpoofing MAC anti-spoofing happened. | notification | - | .1.3.6.1.4.1.890.1.5.13.13.19.4.1 |
| mfgDataFail Signifies invalid manufacturing data. | notification | - | .1.3.6.1.4.1.890.1.5.13.13.19.4.10 |
| swDownloadNotification Signifies SW image downloading/installing/restoring/reverting status. | notification | - | .1.3.6.1.4.1.890.1.5.13.13.19.4.18 |
| cfgChangeNotification Signifies configuration change from CLI command. | notification | - | .1.3.6.1.4.1.890.1.5.13.13.19.4.19 |
| dhcpLeasedNotification To indicate the system complete DHCP lease process.
The variable bindings are:
1) 1: inband management interface; 2: reserved management interface(unused).
2) the IP address of DH… | notification | - | .1.3.6.1.4.1.890.1.5.13.13.19.4.20 |
| sysRestartNotification This is a trap to unify system restart trap definition.
The standard ones ('warm start' and 'cold start') are no longer supported.
1) sysBootupFwVersion: the system happened resta… | notification | - | .1.3.6.1.4.1.890.1.5.13.13.19.4.21 |
| dhcpLeasedFailNotification To indicate the system failed to complete DHCP lease process on management interface.
The variable bindings are:
1) 1: inband management interface; 2: reserved management interfac… | notification | - | .1.3.6.1.4.1.890.1.5.13.13.19.4.22 |
| dhcpLeasedFailNotificationClear Clear dhcpLeasedFailNotification.
The variable bindings are:
1) 1: inband management interface; 2: reserved management interface(unused). | notification | - | .1.3.6.1.4.1.890.1.5.13.13.19.4.23 |
| loopguard The trap signifies loop is detected by ifIndex.
The detected loop is between ifIndex and loopguardSenderIfIndex. | notification | - | .1.3.6.1.4.1.890.1.5.13.13.19.4.24 |
| loopguardClear The trap signifies loop in ifIndex is cleared. | notification | - | .1.3.6.1.4.1.890.1.5.13.13.19.4.25 |
| htPortPolicer The trap signifies host termination attack is detected in ifIndex. | notification | - | .1.3.6.1.4.1.890.1.5.13.13.19.4.26 |
| sysAlarmCutoffEnable Alarm cutoff is activated. | notification | - | .1.3.6.1.4.1.890.1.5.13.13.19.4.27 |
| memoryOverload Signifies memory is overload. | notification | - | .1.3.6.1.4.1.890.1.5.13.13.19.4.28 |
| memoryOverloadClear Signifies memory overload is cleared. | notification | - | .1.3.6.1.4.1.890.1.5.13.13.19.4.29 |
| sysLoginFailure User login is failed. | notification | - | .1.3.6.1.4.1.890.1.5.13.13.19.4.3 |
| macTableFull Signifies MAC forwarding table full. | notification | - | .1.3.6.1.4.1.890.1.5.13.13.19.4.30 |
| macTableFullClear Signifies MAC forwarding table full is cleared. | notification | - | .1.3.6.1.4.1.890.1.5.13.13.19.4.31 |
| mstpNewRoot The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree;
the trap is sent by a bridge soon after its election as the new root, e.g., upon ex… | notification | - | .1.3.6.1.4.1.890.1.5.13.13.19.4.32 |
| mstpTopologyChange A topologyChange is sent if the topology changed of MSTP has detected. | notification | - | .1.3.6.1.4.1.890.1.5.13.13.19.4.33 |
| fwChange A fw_change is sent if the firmware changed of system has detected. | notification | - | .1.3.6.1.4.1.890.1.5.13.13.19.4.34 |
| reloadCfg Signifies configuration reload from CLI command. | notification | - | .1.3.6.1.4.1.890.1.5.13.13.19.4.35 |
| sysLoginSuccess User login is OK. | notification | - | .1.3.6.1.4.1.890.1.5.13.13.19.4.36 |
| protectSwitchSuccess Protect switch success. | notification | - | .1.3.6.1.4.1.890.1.5.13.13.19.4.37 |
| protectSwitchFailed Protect switch failed. | notification | - | .1.3.6.1.4.1.890.1.5.13.13.19.4.38 |
| reboot Send a message to the manager that the system is going to shutdown.
The variable is the reason that causes the system to shutdown.
Note: this notification should be sent before re… | notification | - | .1.3.6.1.4.1.890.1.5.13.13.19.4.4 |
| cpuOverload Signifies cpu is overload. | notification | - | .1.3.6.1.4.1.890.1.5.13.13.19.4.5 |
| cpuOverloadClear Signifies cpu overload is cleared. | notification | - | .1.3.6.1.4.1.890.1.5.13.13.19.4.6 |
| cfgUploadFail Signifies configuration file uploading to EMS failed. | notification | - | .1.3.6.1.4.1.890.1.5.13.13.19.4.7 |
| cfgReloadFail Signifies configuration file reload from FLASH failed. | notification | - | .1.3.6.1.4.1.890.1.5.13.13.19.4.8 |
| writeFlashFail Signifies writing to flash failed. | notification | - | .1.3.6.1.4.1.890.1.5.13.13.19.4.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| iesIANAEventType An object to indicate that trap belongs to which IANA event type. | scalar | IANA-ITU-ALARM-TC-MIBIANAItuEventType | .1.3.6.1.4.1.890.1.5.13.13.19.1.28 |
| iesIANAProbableCause An object to indicate that trap belongs to which IANA problem cause.
Below probable causes shall be supported:
1: power input missing - powerProblem (58)
2: hardware watchdog tri… | scalar | IANA-ITU-ALARM-TC-MIBIANAItuProbableCause | .1.3.6.1.4.1.890.1.5.13.13.19.1.29 |