lldpV2Xdot3RemPowerSource

IEEE8023-DOT3-LLDP-EXT-V2-MIB · .1.3.111.2.802.3.1.5.1.3.2.1.8
MIB view Table view

Object

column Enumeration 
A GET returns an integer indicating the power sources of the
remote system. When the remote system is a PSE, it indicates
whether it is being powered by a primary power source; a backup
power source; or unknown. When the remote system is a PD, it
indicates whether it is being powered by a PSE and locally;
locally only; by a PSE only; or unknown.

Context

MIB
IEEE8023-DOT3-LLDP-EXT-V2-MIB
OID
.1.3.111.2.802.3.1.5.1.3.2.1.8
Type
column
Access
readonly
Status
current
Parent
lldpV2Xdot3RemPowerEntry
Table
lldpV2Xdot3RemPowerTable
Siblings
10

Syntax

Enumeration

Values & Constraints

Enumerated Values
0pseprimary
1psebackup
2pseunknown
3pdpseandlocal
4pdlocalonly
5pdpseonly
6pdunknown

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
lldpV2Xdot3RemPowerPortClass
The value that identifies the port Class of the given port associated with the remote system.
columnLLDP-V2-TC-MIBLldpV2PowerPortClass.1.3.111.2.802.3.1.5.1.3.2.1.1
lldpV2Xdot3RemPDRequestedPowerValue
A GET returns the PD requested power value that was used by the remote system to compute the power value that is has currently allocated to the PD. For a PSE, it is the PD request…
columnSNMPv2-SMIInteger32.1.3.111.2.802.3.1.5.1.3.2.1.10
lldpV2Xdot3RemPSEAllocatedPowerValue
A GET returns the PSE allocated power value received from the remote system. For a PSE, it is the PSE allocated power value that was used by the remote system to compute the power…
columnSNMPv2-SMIInteger32.1.3.111.2.802.3.1.5.1.3.2.1.11
lldpV2Xdot3RemPowerMDISupported
The truth value used to indicate whether the MDI power is supported on the given port associated with the remote system.
columnSNMPv2-TCTruthValue.1.3.111.2.802.3.1.5.1.3.2.1.2
lldpV2Xdot3RemPowerMDIEnabled
The truth value used to identify whether MDI power is enabled on the given port associated with the remote system.
columnSNMPv2-TCTruthValue.1.3.111.2.802.3.1.5.1.3.2.1.3
lldpV2Xdot3RemPowerPairControlable
The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in Clause 8) and is used to indicate whether the pair selection can be controlled …
columnSNMPv2-TCTruthValue.1.3.111.2.802.3.1.5.1.3.2.1.4
lldpV2Xdot3RemPowerPairs
This object contains the value of the pethPsePortPowerPairs object (defined in Clause 8) which is associated with the given port on the remote system.
columnUnsigned32.1.3.111.2.802.3.1.5.1.3.2.1.5
lldpV2Xdot3RemPowerClass
This object contains the value of the pethPsePortPowerClassifications object (defined in Clause 8) which is associated with the given port on the remote system.
columnUnsigned32.1.3.111.2.802.3.1.5.1.3.2.1.6
lldpV2Xdot3RemPowerType
A GET returns an integer indicating whether the remote system is a PSE or a PD and whether it is Type 1 or Type 2.
columnEnumeration.1.3.111.2.802.3.1.5.1.3.2.1.7
lldpV2Xdot3RemPowerPriority
A GET returns the priority of a PD system. For a PSE, this is the priority that the remote system requests. For a PD, this is the priority that the remote system has assigned.
columnEnumeration.1.3.111.2.802.3.1.5.1.3.2.1.9