dot1agCfmMepUnexpLtrIn
IEEE802171-CFM-MIB ·
.1.0.8802.1.1.3.1.6.1.1.30
Object
column
SNMPv2-SMICounter32
The total number of unexpected LTRs received (20.39.1).
Context
- MIB
- IEEE802171-CFM-MIB
- OID
.1.0.8802.1.1.3.1.6.1.1.30- Type
- column
- Access
- readonly
- Status
- current
- Parent
- dot1agCfmMepEntry
- Table
- dot1agCfmMepTable
- Siblings
- 50
Syntax
SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dot1agCfmMepIdentifier Integer that is unique among all the MEPs in the same MA.
Other definition is: a small integer, unique over a given
Maintenance Association, identifying a specific Maintenance
ass… | column | Dot1agCfmMepId | .1.0.8802.1.1.3.1.6.1.1.1 |
| dot1agCfmMepFaultAlarmDestDomain The transportDomain for the address to which Fault Alarms
are to be transmitted.
Typical values will be one of (not all inclusive) list:
transpo… | column | TRANSPORT-ADDRESS-MIBTransportDomain | .1.0.8802.1.1.3.1.6.1.1.10 |
| dot1agCfmMepFaulAlarmDestAddress The transportAddress to which Fault Alarms (12.14.7.7) are
to be transmitted to. The type/format of this object is
determined by the value of dot1agCfmMepFaultAlarmDestDomain.
… | column | TRANSPORT-ADDRESS-MIBTransportAddress | .1.0.8802.1.1.3.1.6.1.1.11 |
| dot1agCfmMepLowPrDef An integer value specifying the lowest priority defect
that is allowed to generate fault alarm. | column | Dot1agCfmLowestAlarmPri | .1.0.8802.1.1.3.1.6.1.1.12 |
| dot1agCfmMepFngAlarmTime The time that defects must be present before a Fault Alarm is
issued (fngAlarmTime. 20.33.3) (default 2.5s). | column | Integer32 | .1.0.8802.1.1.3.1.6.1.1.13 |
| dot1agCfmMepFngResetTime The time that defects must be absent before re-enabling a
Fault Alarm (fngResetTime, 20.33.4) (default 10s). | column | Integer32 | .1.0.8802.1.1.3.1.6.1.1.14 |
| dot1agCfmMepHighestPrDefect The highest priority defect that has been present since the
MEPs Fault Notification Generator State Machine was last in
the FNG_RESET state. | column | Dot1agCfmHighestDefectPri | .1.0.8802.1.1.3.1.6.1.1.15 |
| dot1agCfmMepSomeRdiDefect A Boolean flag indicating that some other MEP in this MEP's MA
is transmitting the RDI bit. | column | SNMPv2-TCTruthValue | .1.0.8802.1.1.3.1.6.1.1.16 |
| dot1agCfmMepErrMacStatus A Boolean flag (someMACstatusDefect, 20.33.6) indicating that
a Port Status TLV (21.5.4) or Interface Status TLV (21.5.5)
is indicating an error condition (can trigger DefMACstatu… | column | SNMPv2-TCTruthValue | .1.0.8802.1.1.3.1.6.1.1.17 |
| dot1agCfmMepSomeRMepCcmDefect A Boolean flag indicating that CCMs are not being received
from at least one of the configured remote MEPs. | column | SNMPv2-TCTruthValue | .1.0.8802.1.1.3.1.6.1.1.18 |
| dot1agCfmMepErrorCcmDefect A Boolean flag indicating that a stream of erroneous CCMs
is being received from some MEP in this MEP's MA. | column | SNMPv2-TCTruthValue | .1.0.8802.1.1.3.1.6.1.1.19 |
| dot1agCfmMepIfIndex This object is the interface index of the interface eiter a
bridge port, or an aggregated IEEE 802.1 link within a bridge
port, to which the MEP is attached. | column | IF-MIBInterfaceIndex | .1.0.8802.1.1.3.1.6.1.1.2 |
| dot1agCfmMepXconCcmDefect A Boolean flag indicating that a stream of CCMs is being
received from a MEP that may be in some other MA. | column | SNMPv2-TCTruthValue | .1.0.8802.1.1.3.1.6.1.1.20 |
| dot1agCfmMepErrorCcmLastFailure The last-received CCM that triggered an DefErrorCCM fault. | column | OctetString | .1.0.8802.1.1.3.1.6.1.1.21 |
| dot1agCfmMepXconCcmLastFailure The last-received CCM that triggered a DefXconCCM fault. | column | OctetString | .1.0.8802.1.1.3.1.6.1.1.22 |
| dot1agCfmMepRCcmSequenceErrors The total number of out-of-sequence CCMs received from all
remote MEPs. | column | SNMPv2-SMICounter32 | .1.0.8802.1.1.3.1.6.1.1.23 |
| dot1agCfmMepCciSentCcms Total number of Continuity Check messages transmitted. | column | SNMPv2-SMICounter32 | .1.0.8802.1.1.3.1.6.1.1.24 |
| dot1agCfmMepNextLbmTransId Next sequence number/transaction identifier to be sent in a
Loopback message. This sequence number can be zero because
it wraps around. | column | SNMPv2-SMIUnsigned32 | .1.0.8802.1.1.3.1.6.1.1.25 |
| dot1agCfmMepLbrIn Total number of valid, in-order Loopback Replies received. | column | SNMPv2-SMICounter32 | .1.0.8802.1.1.3.1.6.1.1.26 |
| dot1agCfmMepLbrInOutOfOrder The total number of valid, out-of-order Loopback Replies
received. | column | SNMPv2-SMICounter32 | .1.0.8802.1.1.3.1.6.1.1.27 |
| dot1agCfmMepLbrBadMsdu (optional) The total number of LBRs received whose
mac_service_data_unit did not match (except for the OpCode)
that of the corresponding LBM (20.2.3). | column | SNMPv2-SMICounter32 | .1.0.8802.1.1.3.1.6.1.1.28 |
| dot1agCfmMepLtmNextSeqNumber Next transaction identifier/sequence number to be sent in a
Linktrace message. This sequence number can be zero because
it wraps around. | column | SNMPv2-SMIUnsigned32 | .1.0.8802.1.1.3.1.6.1.1.29 |
| dot1agCfmMepDirection The direction in which the MEP faces on the Bridge port. | column | Dot1agCfmMpDirection | .1.0.8802.1.1.3.1.6.1.1.3 |
| dot1agCfmMepLbrOut Total number of Loopback Replies transmitted. | column | SNMPv2-SMICounter32 | .1.0.8802.1.1.3.1.6.1.1.31 |
| dot1agCfmMepTransmitLbmStatus A Boolean flag set to true by the bridge port to indicate
that another LBM may be transmitted.
Reset to false by the MEP Loopback Initiator State Machine. | column | SNMPv2-TCTruthValue | .1.0.8802.1.1.3.1.6.1.1.32 |
| dot1agCfmMepTransmitLbmDestMacAddress The Target MAC Address Field to be transmitted: A unicast
destination MAC address.
This address will be used if the value of the column
dot1agCfmMepTransmitLbmDestIsMepId is 'fals… | column | SNMPv2-TCMacAddress | .1.0.8802.1.1.3.1.6.1.1.33 |
| dot1agCfmMepTransmitLbmDestMepId The Maintenance association End Point Identifier of another
MEP in the same Maintenance Association to which the LBM is
to be sent.
This address will be used if the value of the c… | column | Dot1agCfmMepIdOrZero | .1.0.8802.1.1.3.1.6.1.1.34 |
| dot1agCfmMepTransmitLbmDestIsMepId True indicates that MepID of the target MEP is used for
Loopback transmission.
False indicates that unicast destination MAC address of the
target MEP is used for Loopback transmis… | column | SNMPv2-TCTruthValue | .1.0.8802.1.1.3.1.6.1.1.35 |
| dot1agCfmMepTransmitLbmMessages The number of Loopback messages to be transmitted. | column | Integer32 | .1.0.8802.1.1.3.1.6.1.1.36 |
| dot1agCfmMepTransmitLbmDataTlv An arbitrary amount of data to be included in the Data TLV,
if the Data TLV is selected to be sent. | column | OctetString | .1.0.8802.1.1.3.1.6.1.1.37 |
| dot1agCfmMepTransmitLbmVlanPriority Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted frame.
The default value is CCM priority. | column | Integer32 | .1.0.8802.1.1.3.1.6.1.1.38 |
| dot1agCfmMepTransmitLbmVlanDropEnable Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted frame.
For more information about VLAN Drop Enable, please check
IEEE 802.1ad. | column | SNMPv2-TCTruthValue | .1.0.8802.1.1.3.1.6.1.1.39 |
| dot1agCfmMepPrimaryVid An integer indicating the Primary VID of the MEP, always
one of the VIDs assigned to the MEP's MA. The value 0
indicates that either the Primary VID is that of the
MEP's MA, or t… | column | Unsigned32 | .1.0.8802.1.1.3.1.6.1.1.4 |
| dot1agCfmMepTransmitLbmResultOK Indicates the result of the operation:
- true The Loopback Message(s) will be
(or hasbeen) sent.
- false The Loopback Message(s) will not
… | column | SNMPv2-TCTruthValue | .1.0.8802.1.1.3.1.6.1.1.40 |
| dot1agCfmMepTransmitLbmSeqNumber The Loopback Transaction Identifier
(dot1agCfmMepNextLbmTransId) of the first LBM (to be) sent.
The value returned is undefined if
dot1agCfmMepTransmitLbmResultOK is false. | column | SNMPv2-SMIUnsigned32 | .1.0.8802.1.1.3.1.6.1.1.41 |
| dot1agCfmMepTransmitLtmStatus A Boolean flag set to true by the bridge port to indicate
that another LTM may be transmitted.
Reset to false by the MEP Linktrace Initiator State Machine. | column | SNMPv2-TCTruthValue | .1.0.8802.1.1.3.1.6.1.1.42 |
| dot1agCfmMepTransmitLtmFlags The flags field for LTMs transmitted by the MEP. | column | Bits | .1.0.8802.1.1.3.1.6.1.1.43 |
| dot1agCfmMepTransmitLtmTargetMacAddress The Target MAC Address Field to be transmitted: A unicast
destination MAC address.
This address will be used if the value of the column
dot1agCfmMepTransmitLtmTargetIsMepId is 'fa… | column | SNMPv2-TCMacAddress | .1.0.8802.1.1.3.1.6.1.1.44 |
| dot1agCfmMepTransmitLtmTargetMepId An indication of the Target MAC Address Field to be
transmitted:
The Maintenance association End Point Identifier of
another MEP in the same Maintenance Association
This address w… | column | Dot1agCfmMepIdOrZero | .1.0.8802.1.1.3.1.6.1.1.45 |
| dot1agCfmMepTransmitLtmTargetIsMepId True indicates that MepID of the target MEP is used for
Linktrace transmission.
False indicates that unicast destination MAC address of the
target MEP is used for Loopback transmi… | column | SNMPv2-TCTruthValue | .1.0.8802.1.1.3.1.6.1.1.46 |
| dot1agCfmMepTransmitLtmTtl The LTM TTL field. Default value, if not specified, is 64.
The TTL field indicates the number of hops remaining to the
LTM. Decremented by 1 by each Linktrace Responder that
hand… | column | Unsigned32 | .1.0.8802.1.1.3.1.6.1.1.47 |
| dot1agCfmMepTransmitLtmResult Indicates the result of the operation:
- true The Linktrace Message will be (or has been) sent.
- false The Linktrace Message will not be sent | column | SNMPv2-TCTruthValue | .1.0.8802.1.1.3.1.6.1.1.48 |
| dot1agCfmMepTransmitLtmSeqNumber The LTM Transaction Identifier
(dot1agCfmMepLtmNextSeqNumber) of the LTM sent.
The value returned is undefined if
dot1agCfmMepTransmitLtmResult is false. | column | SNMPv2-SMIUnsigned32 | .1.0.8802.1.1.3.1.6.1.1.49 |
| dot1agCfmMepActive Administrative state of the MEP
A Boolean indicating the administrative state of the MEP.
True indicates that the MEP is to function normally, and
fa… | column | SNMPv2-TCTruthValue | .1.0.8802.1.1.3.1.6.1.1.5 |
| dot1agCfmMepTransmitLtmEgressIdentifier Identifies the MEP Linktrace Initiator that is originating,
or the Linktrace Responder that is forwarding, this LTM.
The low-order six octets contain a 48-bit IEEE MAC address
uni… | column | OctetString | .1.0.8802.1.1.3.1.6.1.1.50 |
| dot1agCfmMepRowStatus The status of the row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated. | column | SNMPv2-TCRowStatus | .1.0.8802.1.1.3.1.6.1.1.51 |
| dot1agCfmMepFngState Current state of the MEP Fault Notification Generator
State Machine. | column | Dot1agCfmFngState | .1.0.8802.1.1.3.1.6.1.1.6 |
| dot1agCfmMepCciEnabled If set to true, the MEP will generate CCM messages. | column | SNMPv2-TCTruthValue | .1.0.8802.1.1.3.1.6.1.1.7 |
| dot1agCfmMepCcmLtmPriority The priority value for CCMs and LTMs transmitted by the MEP.
Default Value in the highest priority value allowed to pass
through the bridge port for any of this MEPs VIDs.
The man… | column | Unsigned32 | .1.0.8802.1.1.3.1.6.1.1.8 |
| dot1agCfmMepMacAddress MAC address of the MEP. | column | SNMPv2-TCMacAddress | .1.0.8802.1.1.3.1.6.1.1.9 |