ieee8021CnRpgIfIndex
IEEE8021-CN-MIB ·
.1.3.111.2.802.1.1.18.1.8.1.3
Object
column
IF-MIBInterfaceIndex
This object indicates the interface on which the group of
Reaction Points reside.
Upon a restart of the system, the system SHALL, if necessary,
change the value of this object, and rearrange the order of the
ieee8021CnRpGroupTable, so that the value in
ieee8021CnRpgIfIndex references the row in the ifXTable with
the same value for ifAlias that it referenced before the system
restart. If no such entry exists in the ifXTable, then the
system SHALL delete the row in the ieee8021CnRpGroupTable.
Context
- MIB
- IEEE8021-CN-MIB
- OID
.1.3.111.2.802.1.1.18.1.8.1.3- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- ieee8021CnRpGroupEntry
- Table
- ieee8021CnRpGroupTable
- Siblings
- 13
Values & Constraints
Type Constraints
range: 1..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ieee8021CnRpgComponentId The Bridge component within the system to which the information
in this ieee8021CnRpGroupEntry applies. If the system is
not a Bridge, or if only one component is present in the
… | column | IEEE8021-TC-MIBIEEE8021PbbComponentIdentifier | .1.3.111.2.802.1.1.18.1.8.1.1 |
| ieee8021CnRpgAiRate This object controls the transmission rate increment in the
RPR_ACTIVE_INCREASE state (rpgAiRate) in multiples of 1 Mb/s.
This rate includes all bits consequent to transmitting th… | column | Mb/s SNMPv2-SMIUnsigned32 | .1.3.111.2.802.1.1.18.1.8.1.10 |
| ieee8021CnRpgHaiRate This object controls the transmission rate increment in the
RPR_HYPER_INCREASE state (rpgHaiRate) in multiples of 1 Mb/s.
This rate includes all bits consequent to transmitting th… | column | Mb/s SNMPv2-SMIUnsigned32 | .1.3.111.2.802.1.1.18.1.8.1.11 |
| ieee8021CnRpgGd This object controls the number of bits that the value of the
Quantized Feedback field received in a CNM PDU is shifted to
the right to decrease rpTargetRate. rpgGd is thus 2 to t… | column | SNMPv2-SMIInteger32 | .1.3.111.2.802.1.1.18.1.8.1.12 |
| ieee8021CnRpgMinDecFac This object controls the minimum factor by which the current
RP transmit rate rpCurrentRate can be changed by reception
of a Congestion Notification Message. Its integer value
re… | column | percent Unsigned32 | .1.3.111.2.802.1.1.18.1.8.1.13 |
| ieee8021CnRpgMinRate This object controls the minimum transmission rate (rpgMinRate)
in multiples of 1 Mb/s. A system SHALL support a value for
this object that is no larger than 5 Mb/s per second.
T… | column | Mb/s SNMPv2-SMIUnsigned32 | .1.3.111.2.802.1.1.18.1.8.1.14 |
| ieee8021CnRpgPriority This object indicates the lowest numerical
Congestion Notification Priority Value that this entry's
Reaction Point serves. | column | IEEE8021-TC-MIBIEEE8021PriorityValue | .1.3.111.2.802.1.1.18.1.8.1.2 |
| ieee8021CnRpgIdentifier This object is an arbitrary integer indexing the entries in
this table among the entries for the same interface. This
index SHOULD, where possible, be equal to the
Congestion Not… | column | Unsigned32 | .1.3.111.2.802.1.1.18.1.8.1.4 |
| ieee8021CnRpgEnable Controls the rpEnabled variable of the Reaction Point state
machines of the Reaction Points (RPs) controlled by this
entry as follows:
true(1) The rpEnabled variable for t… | column | SNMPv2-TCTruthValue | .1.3.111.2.802.1.1.18.1.8.1.5 |
| ieee8021CnRpgTimeReset This object controls the value for all of the state machine
variables, rpgTimeReset, used to reset the timers RpWhile. | column | milliseconds SNMPv2-TCTimeInterval | .1.3.111.2.802.1.1.18.1.8.1.6 |
| ieee8021CnRpgByteReset This object controls the value for all of the state machine
variables, rpgByteReset, used to reset the counters
rpByteCount. | column | octets SNMPv2-SMIUnsigned32 | .1.3.111.2.802.1.1.18.1.8.1.7 |
| ieee8021CnRpgThreshold This object controls the number of times rpByteStage or
rpTimeStage can count before the
RP rate control state machine advances states. | column | SNMPv2-SMIUnsigned32 | .1.3.111.2.802.1.1.18.1.8.1.8 |
| ieee8021CnRpgMaxRate This object controls the maximum rate, in multiples of 1 Mb/s,
at which an RP can transmit. Default value is the speed of the
port. A system SHALL support a minimim value for thi… | column | Mb/s SNMPv2-SMIUnsigned32 | .1.3.111.2.802.1.1.18.1.8.1.9 |