ieee8021CnRpgGd

IEEE8021-CN-MIB · .1.3.111.2.802.1.1.18.1.8.1.12

MIB view Table view

Object

column r/w SNMPv2-SMIInteger32

This object controls the number of bits that the value of the
Quantized Feedback field received in a CNM PDU is shifted to
the right to decrease rpTargetRate. rpgGd is thus 2 to the
negative power of this object, e.g., 7 means rpgGd = 1/128.

Context

MIB: IEEE8021-CN-MIB
OID: .1.3.111.2.802.1.1.18.1.8.1.12
Type: column
Access: readwrite
Status: current
Parent: ieee8021CnRpGroupEntry
Table: ieee8021CnRpGroupTable
Siblings: 13

Syntax

SNMPv2-SMIInteger32

Source: SNMPv2-SMIInteger32
Base type: Integer32

Values & Constraints

Type Constraints

range: -2147483648..2147483647

Related Objects

Sibling Objects

Object	Type	Syntax	OID
ieee8021CnRpgComponentId The Bridge component within the system to which the information in this ieee8021CnRpGroupEntry applies. If the system is not a Bridge, or if only one component is present in the …	column	IEEE8021-TC-MIBIEEE8021PbbComponentIdentifier	`.1.3.111.2.802.1.1.18.1.8.1.1`
ieee8021CnRpgAiRate This object controls the transmission rate increment in the RPR_ACTIVE_INCREASE state (rpgAiRate) in multiples of 1 Mb/s. This rate includes all bits consequent to transmitting th…	column	Mb/s SNMPv2-SMIUnsigned32	`.1.3.111.2.802.1.1.18.1.8.1.10`
ieee8021CnRpgHaiRate This object controls the transmission rate increment in the RPR_HYPER_INCREASE state (rpgHaiRate) in multiples of 1 Mb/s. This rate includes all bits consequent to transmitting th…	column	Mb/s SNMPv2-SMIUnsigned32	`.1.3.111.2.802.1.1.18.1.8.1.11`
ieee8021CnRpgMinDecFac This object controls the minimum factor by which the current RP transmit rate rpCurrentRate can be changed by reception of a Congestion Notification Message. Its integer value re…	column	percent Unsigned32	`.1.3.111.2.802.1.1.18.1.8.1.13`
ieee8021CnRpgMinRate This object controls the minimum transmission rate (rpgMinRate) in multiples of 1 Mb/s. A system SHALL support a value for this object that is no larger than 5 Mb/s per second. T…	column	Mb/s SNMPv2-SMIUnsigned32	`.1.3.111.2.802.1.1.18.1.8.1.14`
ieee8021CnRpgPriority This object indicates the lowest numerical Congestion Notification Priority Value that this entry's Reaction Point serves.	column	IEEE8021-TC-MIBIEEE8021PriorityValue	`.1.3.111.2.802.1.1.18.1.8.1.2`
ieee8021CnRpgIfIndex This object indicates the interface on which the group of Reaction Points reside. Upon a restart of the system, the system SHALL, if necessary, change the value of …	column	IF-MIBInterfaceIndex	`.1.3.111.2.802.1.1.18.1.8.1.3`
ieee8021CnRpgIdentifier This object is an arbitrary integer indexing the entries in this table among the entries for the same interface. This index SHOULD, where possible, be equal to the Congestion Not…	column	Unsigned32	`.1.3.111.2.802.1.1.18.1.8.1.4`
ieee8021CnRpgEnable Controls the rpEnabled variable of the Reaction Point state machines of the Reaction Points (RPs) controlled by this entry as follows: true(1) The rpEnabled variable for t…	column	SNMPv2-TCTruthValue	`.1.3.111.2.802.1.1.18.1.8.1.5`
ieee8021CnRpgTimeReset This object controls the value for all of the state machine variables, rpgTimeReset, used to reset the timers RpWhile.	column	milliseconds SNMPv2-TCTimeInterval	`.1.3.111.2.802.1.1.18.1.8.1.6`
ieee8021CnRpgByteReset This object controls the value for all of the state machine variables, rpgByteReset, used to reset the counters rpByteCount.	column	octets SNMPv2-SMIUnsigned32	`.1.3.111.2.802.1.1.18.1.8.1.7`
ieee8021CnRpgThreshold This object controls the number of times rpByteStage or rpTimeStage can count before the RP rate control state machine advances states.	column	SNMPv2-SMIUnsigned32	`.1.3.111.2.802.1.1.18.1.8.1.8`
ieee8021CnRpgMaxRate This object controls the maximum rate, in multiples of 1 Mb/s, at which an RP can transmit. Default value is the speed of the port. A system SHALL support a minimim value for thi…	column	Mb/s SNMPv2-SMIUnsigned32	`.1.3.111.2.802.1.1.18.1.8.1.9`