rprTopoImageWestProtectionStatus
IEEE-802DOT17-RPR-MIB ·
.1.0.8802.17.1.1.1.2.1.1.14
Object
column
RprProtectionStatus
The current protection status of the West span.
Context
- MIB
- IEEE-802DOT17-RPR-MIB
- OID
.1.0.8802.17.1.1.1.2.1.1.14- Type
- column
- Access
- readonly
- Status
- current
- Parent
- rprTopoImageEntry
- Table
- rprTopoImageTable
- Siblings
- 17
Syntax
RprProtectionStatus
- Source
- RprProtectionStatus
- Base type
Bits
Values & Constraints
Type Values
0 | noRequest |
1 | waitToRestore |
2 | manualSwitch |
3 | signalDegraded |
4 | signalFailed |
5 | forcedSwitch |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rprTopoImageIfIndex The ifIndex of this RPR interface. | column | IF-MIBInterfaceIndex | .1.0.8802.17.1.1.1.2.1.1.1 |
| rprTopoImageRinglet0Hops The number of hops to this station through ringlet0.
The self station is indicated with zero hops.
A non reachable station is indicated with -1 value. | column | SNMPv2-SMIInteger32 | .1.0.8802.17.1.1.1.2.1.1.10 |
| rprTopoImageRinglet0ReservedRate The amount of A0 traffic that this station adds on ringlet0,
in Mb/s units. | column | Mb/s SNMPv2-SMIUnsigned32 | .1.0.8802.17.1.1.1.2.1.1.11 |
| rprTopoImageRinglet1Hops The number of hops to this station through ringlet1.
The self station is indicated with zero hops.
A non reachable station is indicated with -1 value. | column | SNMPv2-SMIInteger32 | .1.0.8802.17.1.1.1.2.1.1.12 |
| rprTopoImageRinglet1ReservedRate The amount of A0 traffic that this station adds on ringlet1,
in Mb/s units. | column | Mb/s SNMPv2-SMIUnsigned32 | .1.0.8802.17.1.1.1.2.1.1.13 |
| rprTopoImageWestWeight The weight of the station on the west span.
used for weighted fairness. | column | Unsigned32 | .1.0.8802.17.1.1.1.2.1.1.15 |
| rprTopoImageEastProtectionStatus The current protection status of the east span. | column | RprProtectionStatus | .1.0.8802.17.1.1.1.2.1.1.16 |
| rprTopoImageEastWeight The weight of the station on the east span.
Used for weighted fairness. | column | Unsigned32 | .1.0.8802.17.1.1.1.2.1.1.17 |
| rprTopoImageStatus Status of the station,
the reachability of station through ringlet0 and ringlet1,
wrap active on the station spans,
events of reception frames with bad FCS,
events of reception mu… | column | Bits | .1.0.8802.17.1.1.1.2.1.1.18 |
| rprTopoImageMacAddress The 48-bit MAC address of the station. | column | SNMPv2-TCMacAddress | .1.0.8802.17.1.1.1.2.1.1.2 |
| rprTopoImageSecMacAddress1 The 48-bit first secondary MAC address of the station.
Default and unused value is FF:FF:FF:FF:FF:FF | column | SNMPv2-TCMacAddress | .1.0.8802.17.1.1.1.2.1.1.3 |
| rprTopoImageSecMacAddress2 The 48-bit second secondary MAC address of the station.
Default and unused value is FF:FF:FF:FF:FF:FF | column | SNMPv2-TCMacAddress | .1.0.8802.17.1.1.1.2.1.1.4 |
| rprTopoImageStationIfIndex The station ifIndex. | column | IF-MIBInterfaceIndex | .1.0.8802.17.1.1.1.2.1.1.5 |
| rprTopoImageStationName The operator assigned station name. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.0.8802.17.1.1.1.2.1.1.6 |
| rprTopoImageInetAddressType Denotes the address type of the station INET address
It should be set to 'unknown' if station INET address
is not known. | column | INET-ADDRESS-MIBInetAddressType | .1.0.8802.17.1.1.1.2.1.1.7 |
| rprTopoImageInetAddress This object contains the value of of the station
IP (v4 or V6) address.
The format of this address is specified by the value
of the corresponding rprTopoImageInetAddressType obj… | column | INET-ADDRESS-MIBInetAddress | .1.0.8802.17.1.1.1.2.1.1.8 |
| rprTopoImageCapability Indicates the capabilities that the MAC supports.
jumboFrames - Indicates whether the MAC capable of receiving,
transmitting and transiting jumbo frames.
… | column | Bits | .1.0.8802.17.1.1.1.2.1.1.9 |