rprFairnessSTQLowWaterMark
IEEE-802DOT17-RPR-MIB ·
.1.0.8802.17.1.1.1.2.2.1.19
Object
column
Tenth of percent Unsigned32
The lowest level of STQ occupancy since the last reset of this value, in percentage of the STQ size.
Context
- MIB
- IEEE-802DOT17-RPR-MIB
- OID
.1.0.8802.17.1.1.1.2.2.1.19- Type
- column
- Access
- readonly
- Status
- current
- Units
- Tenth of percent
- Parent
- rprFairnessEntry
- Table
- rprFairnessTable
- Siblings
- 20
Syntax
Tenth of percent Unsigned32
Values & Constraints
Object Constraints
range: 0-1000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rprFairnessIfIndex The ifIndex of this RPR interface. | column | IF-MIBInterfaceIndex | .1.0.8802.17.1.1.1.2.2.1.1 |
| rprFairnessMcffReportCoef Indicates the number of SCFF advertisingIntervals that
elapse between the sending of successive MCFFs,
This value allows the interval between sending MCFFs
to be established as M… | column | Unsigned32 | .1.0.8802.17.1.1.1.2.2.1.10 |
| rprFairnessActiveWeightsCoef Indicates the number of agingIntervals that elapse between
successive computations of activeWeights.
This value allows the interval between computations of
activeWeights to be es… | column | Unsigned32 | .1.0.8802.17.1.1.1.2.2.1.11 |
| rprFairnessSTQHighThreshold A level of STQ occupancy at or above which CSFE frames are no
longer admitted. Defined only for a dual transit-queue
implementation.
This attribute specifies the h… | column | Tenth of percent Unsigned32 | .1.0.8802.17.1.1.1.2.2.1.12 |
| rprFairnessSTQMedThreshold A level of buffer occupancy in a dual-queue deployment,
at or above which congestion on the outbound link is declared.
This attribute specifies the medium threshold… | column | Tenth of percent Unsigned32 | .1.0.8802.17.1.1.1.2.2.1.13 |
| rprFairnessSTQLowThreshold A level of STQ occupancy at or above which congestion on
the outbound link is imminent.
Defined only for dual transit-queue implementations.
This attribute specif… | column | Tenth of percent Unsigned32 | .1.0.8802.17.1.1.1.2.2.1.14 |
| rprFairnessRateHighThreshold Rate at or above which congestion on the outbound link
is declared.
The range is [0.4 * unreservedRate, 0.99 * unreservedRate].
The default value is 0.95 * unreser… | column | Tenth of percent Unsigned32 | .1.0.8802.17.1.1.1.2.2.1.15 |
| rprFairnessRateLowThreshold Rate at or above which congestion on the outbound link
is imminent.
The range is [0.5 * rateHighThreshold, 0.99 * rateHighThreshold].
The default value is 0.9 * rat… | column | Tenth of percent Unsigned32 | .1.0.8802.17.1.1.1.2.2.1.16 |
| rprFairnessResetWaterMarks Write resetWaterMarks to this attribute to reset
the STQ water marks to the current occupancy.
Default value is idle | column | Enumeration | .1.0.8802.17.1.1.1.2.2.1.17 |
| rprFairnessSTQHighWaterMark The highest level of STQ occupancy since the last reset
of this value, in percentage of the STQ size. | column | Tenth of percent Unsigned32 | .1.0.8802.17.1.1.1.2.2.1.18 |
| rprFairnessRinglet The ringlet for which this row contains information.
ringlet0 is the transmission of the east span and the
reception of the west span,
ringlet1 is the transmission… | column | Enumeration | .1.0.8802.17.1.1.1.2.2.1.2 |
| rprFairnessLastChange The value of sysUpTime at the time when any of the following
attributes changes:
rprFairnessRingletWeight, rprFairnessReservedRate,
rprFairnessMaxAllowed, rprFairnessAgeCoef, rprF… | column | SNMPv2-TCTimeStamp | .1.0.8802.17.1.1.1.2.2.1.20 |
| rprFairnessChanges Indicates number of times rprFairnessLastChange changed.
The discontinued counter value is indicated
by the ifCounterDiscontinuityTime value. | column | SNMPv2-SMICounter32 | .1.0.8802.17.1.1.1.2.2.1.21 |
| rprFairnessRingletWeight Weight assigned to fairness to permit the scaling of
fair rate values among stations on the ringlet.
This allows one station to use a larger share of available
capacity than anot… | column | Unsigned32 | .1.0.8802.17.1.1.1.2.2.1.3 |
| rprFairnessReservedRate The amount of A0 traffic that this station adds that ringlet,
in Mb/s units.
Default value for A0 reserved rate is 0 Mb/s. | column | Mb/s SNMPv2-SMIUnsigned32 | .1.0.8802.17.1.1.1.2.2.1.4 |
| rprFairnessMaxAllowed The maximum value that the station is allowed to transmit
local excess traffic to the ringlet. The default value
is the physical ring rate. | column | Mb/s SNMPv2-SMIUnsigned32 | .1.0.8802.17.1.1.1.2.2.1.5 |
| rprFairnessAgeCoef The coefficient used by the aging procedure to specify
the relative weights assigned to
(a) the change in the value of a rate-counter during
the most recent agingInterval a… | column | Unsigned32 | .1.0.8802.17.1.1.1.2.2.1.6 |
| rprFairnessRampCoef The coefficient used for ramping a rate.
The value is interpreted as 2 raised to the power
specified by this attribute.
The default v… | column | Unsigned32 | .1.0.8802.17.1.1.1.2.2.1.7 |
| rprFairnessLpCoef The coefficient used by the low-pass filter procedure
to specify the relative weights applied to
(a) the increase in the rate-count value during the most
recent agingInterval… | column | Unsigned32 | .1.0.8802.17.1.1.1.2.2.1.8 |
| rprFairnessAdvertisementRatio The ratio between the link capacity reserved for fairness
control messages and the total link capacity.
Default value of fairness advertisement ratio is 5 units
of… | column | 0.00025 Unsigned32 | .1.0.8802.17.1.1.1.2.2.1.9 |