rprFairnessRinglet
IEEE-802DOT17-RPR-MIB ·
.1.0.8802.17.1.1.1.2.2.1.2
Object
column
Enumeration
The ringlet for which this row contains information.
ringlet0 is the transmission of the east span and the
reception of the west span,
ringlet1 is the transmission of the west span and the
reception of the east span
Context
- MIB
- IEEE-802DOT17-RPR-MIB
- OID
.1.0.8802.17.1.1.1.2.2.1.2- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- rprFairnessEntry
- Table
- rprFairnessTable
- Siblings
- 20
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | ringlet0 |
2 | ringlet1 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rprFairnessIfIndex The ifIndex of this RPR interface. | column | IF-MIBInterfaceIndex | .1.0.8802.17.1.1.1.2.2.1.1 |
| rprFairnessMcffReportCoef Indicates the number of SCFF advertisingIntervals that
elapse between the sending of successive MCFFs,
This value allows the interval between sending MCFFs
to be established as M… | column | Unsigned32 | .1.0.8802.17.1.1.1.2.2.1.10 |
| rprFairnessActiveWeightsCoef Indicates the number of agingIntervals that elapse between
successive computations of activeWeights.
This value allows the interval between computations of
activeWeights to be es… | column | Unsigned32 | .1.0.8802.17.1.1.1.2.2.1.11 |
| rprFairnessSTQHighThreshold A level of STQ occupancy at or above which CSFE frames are no
longer admitted. Defined only for a dual transit-queue
implementation.
This attribute specifies the h… | column | Tenth of percent Unsigned32 | .1.0.8802.17.1.1.1.2.2.1.12 |
| rprFairnessSTQMedThreshold A level of buffer occupancy in a dual-queue deployment,
at or above which congestion on the outbound link is declared.
This attribute specifies the medium threshold… | column | Tenth of percent Unsigned32 | .1.0.8802.17.1.1.1.2.2.1.13 |
| rprFairnessSTQLowThreshold A level of STQ occupancy at or above which congestion on
the outbound link is imminent.
Defined only for dual transit-queue implementations.
This attribute specif… | column | Tenth of percent Unsigned32 | .1.0.8802.17.1.1.1.2.2.1.14 |
| rprFairnessRateHighThreshold Rate at or above which congestion on the outbound link
is declared.
The range is [0.4 * unreservedRate, 0.99 * unreservedRate].
The default value is 0.95 * unreser… | column | Tenth of percent Unsigned32 | .1.0.8802.17.1.1.1.2.2.1.15 |
| rprFairnessRateLowThreshold Rate at or above which congestion on the outbound link
is imminent.
The range is [0.5 * rateHighThreshold, 0.99 * rateHighThreshold].
The default value is 0.9 * rat… | column | Tenth of percent Unsigned32 | .1.0.8802.17.1.1.1.2.2.1.16 |
| rprFairnessResetWaterMarks Write resetWaterMarks to this attribute to reset
the STQ water marks to the current occupancy.
Default value is idle | column | Enumeration | .1.0.8802.17.1.1.1.2.2.1.17 |
| rprFairnessSTQHighWaterMark The highest level of STQ occupancy since the last reset
of this value, in percentage of the STQ size. | column | Tenth of percent Unsigned32 | .1.0.8802.17.1.1.1.2.2.1.18 |
| rprFairnessSTQLowWaterMark The lowest level of STQ occupancy since the last reset of
this value, in percentage of the STQ size. | column | Tenth of percent Unsigned32 | .1.0.8802.17.1.1.1.2.2.1.19 |
| rprFairnessLastChange The value of sysUpTime at the time when any of the following
attributes changes:
rprFairnessRingletWeight, rprFairnessReservedRate,
rprFairnessMaxAllowed, rprFairnessAgeCoef, rprF… | column | SNMPv2-TCTimeStamp | .1.0.8802.17.1.1.1.2.2.1.20 |
| rprFairnessChanges Indicates number of times rprFairnessLastChange changed.
The discontinued counter value is indicated
by the ifCounterDiscontinuityTime value. | column | SNMPv2-SMICounter32 | .1.0.8802.17.1.1.1.2.2.1.21 |
| rprFairnessRingletWeight Weight assigned to fairness to permit the scaling of
fair rate values among stations on the ringlet.
This allows one station to use a larger share of available
capacity than anot… | column | Unsigned32 | .1.0.8802.17.1.1.1.2.2.1.3 |
| rprFairnessReservedRate The amount of A0 traffic that this station adds that ringlet,
in Mb/s units.
Default value for A0 reserved rate is 0 Mb/s. | column | Mb/s SNMPv2-SMIUnsigned32 | .1.0.8802.17.1.1.1.2.2.1.4 |
| rprFairnessMaxAllowed The maximum value that the station is allowed to transmit
local excess traffic to the ringlet. The default value
is the physical ring rate. | column | Mb/s SNMPv2-SMIUnsigned32 | .1.0.8802.17.1.1.1.2.2.1.5 |
| rprFairnessAgeCoef The coefficient used by the aging procedure to specify
the relative weights assigned to
(a) the change in the value of a rate-counter during
the most recent agingInterval a… | column | Unsigned32 | .1.0.8802.17.1.1.1.2.2.1.6 |
| rprFairnessRampCoef The coefficient used for ramping a rate.
The value is interpreted as 2 raised to the power
specified by this attribute.
The default v… | column | Unsigned32 | .1.0.8802.17.1.1.1.2.2.1.7 |
| rprFairnessLpCoef The coefficient used by the low-pass filter procedure
to specify the relative weights applied to
(a) the increase in the rate-count value during the most
recent agingInterval… | column | Unsigned32 | .1.0.8802.17.1.1.1.2.2.1.8 |
| rprFairnessAdvertisementRatio The ratio between the link capacity reserved for fairness
control messages and the total link capacity.
Default value of fairness advertisement ratio is 5 units
of… | column | 0.00025 Unsigned32 | .1.0.8802.17.1.1.1.2.2.1.9 |