ibmvPortCfgMetric
IBM6611-MIB ·
.1.3.6.1.4.1.2.6.2.18.7.1.1.6
Object
column
mandatory
Integer32
Administrator defined value for port metric. This value overrides the metric which is used by the IBM 6611 to make routing decisions. If no response is provided to this parameter, the IBM 6611 will use defaults contained within the MPNP program. These defaults are based on values assigned by Banyan Systems for its VINES servers. The port metric is a rough estimate of the round trip delay for a maximum sized VINES IP packet to travel to any neighbor on this port. The unit for the metric value is 200 milliseconds. The default metric for an Ethernet port is 2. The default metric for a Token-Ring is determined by the response to the Token-Ring Data Rate parameter. The default metric for a serial port is determined by the response to the Serial-Line Speed parameter.
Context
- MIB
- IBM6611-MIB
- OID
.1.3.6.1.4.1.2.6.2.18.7.1.1.6- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- ibmvPortCfgEntry
- Table
- ibmvPortCfgTable
- Siblings
- 11
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ibmvPortCfgIfIndex mandatory The interface (using the MIB II standard) which uniquely
identifies each interface and allows multiple tables to be
associated with a given interface. This number corresponds to
t… | column | Integer32 | .1.3.6.1.4.1.2.6.2.18.7.1.1.1 |
| ibmvPortCfgInFltNum mandatory The number of inbound port filters defined for this port. | column | Integer32 | .1.3.6.1.4.1.2.6.2.18.7.1.1.10 |
| ibmvPortCfgOutFlt mandatory Administrator defined value which allows outbound port filters
to be defined. The default value is 'disabled'. | column | Enumeration | .1.3.6.1.4.1.2.6.2.18.7.1.1.11 |
| ibmvPortCfgOutFltNum mandatory The number of outbound port filters defined for this port. | column | Integer32 | .1.3.6.1.4.1.2.6.2.18.7.1.1.12 |
| ibmvPortCfgARP mandatory Administrator defined value which specifies whether the router
node will assign VINES addresses to clients that reside on the LAN
attached to this port. The default value for thi… | column | Enumeration | .1.3.6.1.4.1.2.6.2.18.7.1.1.2 |
| ibmvPortCfgServ mandatory Administrator defined value specifying whether the serverless
option is enables or disabled. When the serverless option is
enabled; the router looks for particular broadcasts tha… | column | Enumeration | .1.3.6.1.4.1.2.6.2.18.7.1.1.3 |
| ibmvPortCfgHCtoServ mandatory Administrator defined value which specifies the number of hops
from the client to the router node. | column | Integer32 | .1.3.6.1.4.1.2.6.2.18.7.1.1.4 |
| ibmvPortCfgPerUpdate mandatory Administrator defined value which specifies whether periodic
updates will be sent over a WAN link. | column | Enumeration | .1.3.6.1.4.1.2.6.2.18.7.1.1.5 |
| ibmvPortCfgTR mandatory Administrator defined value which determines the encapsulation
method used for receiving and transmitting VINES packets on
this port. IEEE 802.5 LLC uses 802.2 encapsulation follo… | column | Enumeration | .1.3.6.1.4.1.2.6.2.18.7.1.1.7 |
| ibmvPortCfgEN mandatory Administrator defined value which determines the encapsulation
method used for receiving and transmitting VINES packets on
this port. Ethernet II uses DIX encapsulation with a pac… | column | Enumeration | .1.3.6.1.4.1.2.6.2.18.7.1.1.8 |
| ibmvPortCfgInFlt mandatory Administrator defined value which allows inbound port filters
to be defined. The default value is 'disabled'. | column | Enumeration | .1.3.6.1.4.1.2.6.2.18.7.1.1.9 |