ibmappnNodeLsIdNum
IBM6611-MIB ·
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.11
Object
column
mandatory
OctetString
The ID number is the last 5 digits of the node_id. These 5 hexadecimal digits are administratively defined and combined with the 3 digit block number form the node_id. This node_id is used to identify the local node and is include in APPN alerts as well as being included in XIDs. A unique value is required for connections to SNA sub-area.
Context
- MIB
- IBM6611-MIB
- OID
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.11- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- ibmappnNodeLsEntry
- Table
- ibmappnNodeLsTable
- Siblings
- 41
Syntax
OctetString
Values & Constraints
Object Constraints
range: 5-5
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ibmappnNodeLsName mandatory Administratively-assigned name for the link station.
The name can be from one to eight characters. | column | OctetString | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.1 |
| ibmappnNodeLsBlockNum mandatory The block number is the first three digits of the node_id.
These 3 hexideimal digits identify the product and are not
configurable. | column | OctetString | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.10 |
| ibmappnNodeLsCpCpSession mandatory Indicates whether CP-CP sessions are
supported by this link station. | column | Enumeration | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.12 |
| ibmappnNodeLsTargetPacingCount mandatory Numeric value between 0 and 32767 inclusive indicating
the desired pacing window size for BINDs on this TG.
The number is significant only when fixed bind pacing
is being performe… | column | Integer32 | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.13 |
| ibmappnNodeLsMaxSendBtuSize mandatory Numeric value between 0 and 32767 inclusive indicating
the desired number of bytes in a Basic Transmission Unit
(BTU) that can be sent on this TG.
This is an administratively assi… | column | Integer32 | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.14 |
| ibmappnNodeLsEffCap mandatory The effective capacity is an integer value that indicates
the kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 603,979,… | column | Integer32 | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.15 |
| ibmappnNodeLsConnCost mandatory Cost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255, which indicates maximum cost.
This is a… | column | Integer32 | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.16 |
| ibmappnNodeLsByteCost mandatory Relative cost of transmitting a byte over this link.
Range is from 0 (lowest cost) to 255.
This is an administratively assigned value associated
with the TG using this link statio… | column | Integer32 | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.17 |
| ibmappnNodeLsSecurity mandatory The security is represented as an integer with a range of
1 thru 255 with the most common values enumerated as
defined above.
This is an administratively assigned value associated… | column | Enumeration | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.18 |
| ibmappnNodeLsDelay mandatory Relative amount of time that it takes for a signal to
travel the length of the logical link. This time is
represented in micro seconds, with some of the more
common values enumer… | column | Enumeration | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.19 |
| ibmappnNodeLsPortName mandatory Administratively-assigned name for the port.
The name can be from one to eight characters. | column | OctetString | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.2 |
| ibmappnNodeLsUsr1 mandatory First user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with the TG using this link station. | column | Integer32 | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.20 |
| ibmappnNodeLsUsr2 mandatory Second user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with the TG using this link station. | column | Integer32 | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.21 |
| ibmappnNodeLsUsr3 mandatory Third user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with the TG using this link station. | column | Integer32 | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.22 |
| ibmappnNodeLsInXidBytes mandatory Number of XID bytes received. | column | RFC1155-SMICounter | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.23 |
| ibmappnNodeLsInMsgBytes mandatory Number of message (I-frame) bytes received. | column | RFC1155-SMICounter | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.24 |
| ibmappnNodeLsInXidFrames mandatory Number of XID frames received. | column | RFC1155-SMICounter | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.25 |
| ibmappnNodeLsInMsgFrames mandatory Number of message (I-frame) frames received. | column | RFC1155-SMICounter | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.26 |
| ibmappnNodeLsOutXidBytes mandatory Number of XID bytes sent. | column | RFC1155-SMICounter | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.27 |
| ibmappnNodeLsOutMsgBytes mandatory Number of message (I-frame) bytes sent. | column | RFC1155-SMICounter | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.28 |
| ibmappnNodeLsOutXidFrames mandatory Number of XID frames sent. | column | RFC1155-SMICounter | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.29 |
| ibmappnNodeLsDlcType mandatory The type of DLC interface, distinguished according to
the protocol immediately 'below' this layer. | column | Enumeration | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.3 |
| ibmappnNodeLsOutMsgFrames mandatory Number of message (I-frame) frames sent. | column | RFC1155-SMICounter | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.30 |
| ibmappnNodeLsEchoRsps mandatory Number of responses returned from adjacent link station.
A response should be returned for each test frame sent by
this node.
Test frames are sent to adjacent nodes periodically t… | column | RFC1155-SMICounter | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.31 |
| ibmappnNodeLsCurrentDelay mandatory The time that it took for the last test signal to be
sent and returned from this link station to the
adjacent links station.
This time is represented in milliseconds. | column | Integer32 | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.32 |
| ibmappnNodeLsMaxDelay mandatory The longest time it took for a test signal
to be sent and returned from this link station to the
adjacent links station.
This time is represented in milliseconds . | column | Integer32 | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.33 |
| ibmappnNodeLsMinDelay mandatory The shortest time it took for a test signal
to be sent and returned from this link station to the
adjacent links station.
This time is represented in milliseconds. | column | Integer32 | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.34 |
| ibmappnNodeLsMaxDelayTime mandatory The time (since system up in hundredth of seconds)
when the longest delay occurred.
This time can be used to identify when this high
water mark occurred in relation to the last in… | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.35 |
| ibmappnNodeLsGoodXids mandatory The total number of successful XIDs that have occurred
on this link station since the time it was started. | column | RFC1155-SMICounter | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.36 |
| ibmappnNodeLsBadXids mandatory The total number of unsuccessful XIDs that have occurred
on this link station since the time it was started. | column | RFC1155-SMICounter | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.37 |
| ibmappnNodeLsSpecific mandatory Identifies the DLC specific OBJECT IDENTIFIER
that can provide additional information. | column | ObjectIdentifier | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.38 |
| ibmappnNodeLsSubState mandatory State of this link station. | column | Enumeration | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.39 |
| ibmappnNodeLsDynamic mandatory Identifies whether this resource is a dynamic link station.
Dynamic link stations are created when adjacent nodes
that have not been locally defined establish a connection
with th… | column | Enumeration | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.4 |
| ibmappnNodeLsStartTime mandatory The time (in hundredth of seconds) this link station
has been active the last time since the time APPN was
initialized. | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.40 |
| ibmappnNodeLsActiveTime mandatory The time (in hundredth of seconds) this link station
has been in the active state.
A zero value indicates the link station has never been
active. | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.41 |
| ibmappnNodeLsCurrentStateTime mandatory The time (in hundredth of seconds) the link station is
in the current state. | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.42 |
| ibmappnNodeLsState mandatory State of this link station. | column | Enumeration | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.5 |
| ibmappnNodeLsCpName mandatory Fully-qualified name of the adjacent node for this link
station. The name can be from three to seventeen characters.
Format is netid.cpname. | column | OctetString | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.6 |
| ibmappnNodeLsTgNum mandatory Number associated with the TG to this link station. | column | Integer32 | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.7 |
| ibmappnNodeLsLimResource mandatory Indicates whether the link station is
a limited resource. If it is, the TG
is deactivated when there are no sessions. | column | Enumeration | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.8 |
| ibmappnNodeLsMigration mandatory Indicates whether this link station will be used
for connections to down-level or migration partners. | column | Enumeration | .1.3.6.1.4.1.2.6.2.13.1.5.1.1.9 |