ibminterfaceClearAll
IBM-INTERFACE-MIB ·
.1.3.6.1.4.1.2.6.119.4.17.1.1.13
Object
column
mandatory
r/w
Enumeration
When SET to a value of clear(1), all the reset actions
performed by the MIB objects defined above are executed
at once.
This action has the same behavior as executing the
CLEAR command from the T5 console prompt (+).
When READ, this object always returns a value of noaction(0),
since this object is intended as a trigger, rather than
providing information.
Context
- MIB
- IBM-INTERFACE-MIB
- OID
.1.3.6.1.4.1.2.6.119.4.17.1.1.13- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- ibminterfaceClearEntry
- Table
- ibminterfaceClearTable
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | noaction |
1 | clear |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ibminterfaceClearInOctets mandatory When SET to a value of clear(1), the counter of bytes
received over this interface is reset.
When READ, this object always returns a value of noaction(0),
since thi… | column | Enumeration | .1.3.6.1.4.1.2.6.119.4.17.1.1.1 |
| ibminterfaceClearOutAll mandatory When SET to a value of clear(1), the counters for all
output counters (byte, packet, error) are reset.
When READ, this object always returns a value of noaction(0),… | column | Enumeration | .1.3.6.1.4.1.2.6.119.4.17.1.1.10 |
| ibminterfaceClearMaintTest mandatory When SET to a value of clear(1), the counters for
self test pass, self test fail and maintenance
fail are reset.
When READ, this object always returns a value of no… | column | Enumeration | .1.3.6.1.4.1.2.6.119.4.17.1.1.11 |
| ibminterfaceClearDeviceSpecific mandatory When SET to a value of clear(1), all the device specific
counters are reset. For example, for an Ethernet
interface, all the counters provided in the
dot3StatsTable are reset.
… | column | Enumeration | .1.3.6.1.4.1.2.6.119.4.17.1.1.12 |
| ibminterfaceClearInUcastPkts mandatory When SET to a value of clear(1), the counter of unicast
packets received over this interface is reset.
When READ, this object always returns a value of noaction(0),… | column | Enumeration | .1.3.6.1.4.1.2.6.119.4.17.1.1.2 |
| ibminterfaceClearInMulticastPkts mandatory When SET to a value of clear(1), the counter of multicast
packets received over this interface is reset.
When READ, this object always returns a value of noaction(0… | column | Enumeration | .1.3.6.1.4.1.2.6.119.4.17.1.1.3 |
| ibminterfaceClearInErrors mandatory When SET to a value of clear(1), the counters for all
types of input errors are reset.
When READ, this object always returns a value of noaction(0),
since this obje… | column | Enumeration | .1.3.6.1.4.1.2.6.119.4.17.1.1.4 |
| ibminterfaceClearInAll mandatory When SET to a value of clear(1), the counters for all
input counters (byte, packet, error) are reset.
When READ, this object always returns a value of noaction(0),
… | column | Enumeration | .1.3.6.1.4.1.2.6.119.4.17.1.1.5 |
| ibminterfaceClearOutOctets mandatory When SET to a value of clear(1), the counter of bytes
sent over this interface is reset.
When READ, this object always returns a value of noaction(0),
since this ob… | column | Enumeration | .1.3.6.1.4.1.2.6.119.4.17.1.1.6 |
| ibminterfaceClearOutUcastPkts mandatory When SET to a value of clear(1), the counter of unicast
packets sent over this interface is reset.
When READ, this object always returns a value of noaction(0),
sin… | column | Enumeration | .1.3.6.1.4.1.2.6.119.4.17.1.1.7 |
| ibminterfaceClearOutMulticastPkts mandatory When SET to a value of clear(1), the counter of multicast
packets sent over this interface is reset.
When READ, this object always returns a value of noaction(0),
s… | column | Enumeration | .1.3.6.1.4.1.2.6.119.4.17.1.1.8 |
| ibminterfaceClearOutErrors mandatory When SET to a value of clear(1), the counters for all
types of output errors are reset.
When READ, this object always returns a value of noaction(0),
since this obj… | column | Enumeration | .1.3.6.1.4.1.2.6.119.4.17.1.1.9 |