agCurCfgBootp
IBM-GbTOR-G8264CS-MIB ·
.1.3.6.1.4.1.20301.2.7.15.1.1.1.29
Object
scalar
Enumeration
Enable or disable the use of BootP, as currently configured in the current configuration block.
Context
- MIB
- IBM-GbTOR-G8264CS-MIB
- OID
.1.3.6.1.4.1.20301.2.7.15.1.1.1.29- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- agSystem
- Siblings
- 111
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| agSoftwareVersion The version of the software image that is currently running on the
system in the form of 'major.minor.maintenance.bugfix'. A zero
length string is returned if version is not avai… | scalar | OctetString | .1.3.6.1.4.1.20301.2.7.15.1.1.1.10 |
| agCurCfgSysCustomDstStart The current Custom DST start rule | scalar | OctetString | .1.3.6.1.4.1.20301.2.7.15.1.1.1.100 |
| agNewCfgSysCustomDstStart Set Custom DST start rule | scalar | OctetString | .1.3.6.1.4.1.20301.2.7.15.1.1.1.101 |
| agCurCfgSysCustomDstEnd The current Custom DST end rule | scalar | OctetString | .1.3.6.1.4.1.20301.2.7.15.1.1.1.102 |
| agNewCfgSysCustomDstEnd Set Custom DST end rule | scalar | OctetString | .1.3.6.1.4.1.20301.2.7.15.1.1.1.103 |
| agHavePanicDump The presence of a panic dump in the flash memory. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.104 |
| agBootVer The version of the boot code in the form of 'major.minor.bugfix'.
A zero length string is returned if version is not available. | scalar | OctetString | .1.3.6.1.4.1.20301.2.7.15.1.1.1.11 |
| agCurCfgResetControl Current reset control state. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.111 |
| agNewCfgResetControl Enable/disable reset control after panic. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.112 |
| agCurCfgSysDlight Current daylight savings time status. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.113 |
| agNewCfgSysDlight Enable/disable daylight savings time. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.114 |
| agCurCfgErrDisableRecovery This object indicates whether the system will automatically
re-enable an error-disabled port after the time interval
indicated by agCurCfgErrDisableTimeout has elapsed. A port
is … | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.115 |
| agNewCfgErrDisableRecovery This object specifies whether the system should automatically
re-enable an error-disabled port. Use this object to change
the global setting of the error-disable recovery action. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.116 |
| agCurCfgErrDisableTimeout This object indicates the time, in seconds, that the system
will wait before it automatically re-enables any port that
is in error-disabled state. | scalar | seconds Integer32 | .1.3.6.1.4.1.20301.2.7.15.1.1.1.117 |
| agNewCfgErrDisableTimeout This object specifies the time, in seconds, that the system
should wait before it automatically re-enables a port that
is in error-disabled state. Use this object to change the
g… | scalar | seconds Integer32 | .1.3.6.1.4.1.20301.2.7.15.1.1.1.118 |
| agCurCfgTelnetAccess Current telnet access state. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.119 |
| agImage1Ver The version of the software image stored in image 1 storage in the
form of 'major.minor.bugfix'. A zero length string is returned if
version is not available or there is no valid… | scalar | OctetString | .1.3.6.1.4.1.20301.2.7.15.1.1.1.12 |
| agNewCfgTelnetAccess Enable/disable telnet access. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.120 |
| agCurCfgDcbx Current DCBX state. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.121 |
| agNewCfgDcbx Enable/disable DCBX feature. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.122 |
| serverPortsCurCfgPorts The current configured server port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| … | scalar | OctetString | .1.3.6.1.4.1.20301.2.7.15.1.1.1.127 |
| serverPortsNewCfgPorts New configuration server port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |… | scalar | OctetString | .1.3.6.1.4.1.20301.2.7.15.1.1.1.128 |
| serverPortsNewCfgAddPort The port to be added to the server ports list. A '0' value is
returned when read. | scalar | PortNumber | .1.3.6.1.4.1.20301.2.7.15.1.1.1.129 |
| agImage2Ver The version of the software image stored in image 2 storage in the
form of 'major.minor.bugfix'. A zero length string is returned if
version is not available or there is no valid… | scalar | OctetString | .1.3.6.1.4.1.20301.2.7.15.1.1.1.13 |
| serverPortsNewCfgRemovePort The port to be removed from the server ports list. A '0' value is
returned when read. | scalar | PortNumber | .1.3.6.1.4.1.20301.2.7.15.1.1.1.130 |
| agNetboot Ena/dis loading of config over n/w during bootup | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.133 |
| agNetbootTftpAddr Tftp server address from where config file needs to be downloaded | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.20301.2.7.15.1.1.1.134 |
| agNetbootCfgFile Config file location on tftp server | scalar | OctetString | .1.3.6.1.4.1.20301.2.7.15.1.1.1.135 |
| agCurCfgLinkscanMode Set linkscan mode | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.136 |
| agNewCfgLinkscanMode Set linkscan mode | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.137 |
| agUSBboot Ena/dis USB Boot capability | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.138 |
| agCurServiceLED Ena/dis Service Required LED | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.139 |
| agRtcDate The date on the real time clock in the form of 'mm/dd/yy'.
A zero length string is returned if date is not available. | scalar | OctetString | .1.3.6.1.4.1.20301.2.7.15.1.1.1.14 |
| agNewServiceLED Ena/dis Service Required LED | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.140 |
| agUSBeject Eject USB - eject(1)
Get current USB state:
usbready(2) - USB mounted
nousb(3) - no USB mounted | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.141 |
| agCurRFC4741NetconfAccess Current NETCONF server access state. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.142 |
| agNewRFC4741NetconfAccess Enable/disable NETCONF server access state. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.143 |
| agCurRFC4741NetconfSessionTimeout Once NETCONF session setup, NETCONF server will allocate resource
for this session.
agCurRFC4741NetconfSessionTimeout indicates the number of seconds before
the resources are free… | scalar | Integer32 | .1.3.6.1.4.1.20301.2.7.15.1.1.1.144 |
| agNewRFC4741NetconfSessionTimeout Once NETCONF session setup, NETCONF server will allocate resource
for this session.
agNewRFC4741NetconfSessionTimeout specifies the number of seconds before
the resources are free… | scalar | Integer32 | .1.3.6.1.4.1.20301.2.7.15.1.1.1.145 |
| agCurRFC4741NetconfSshAccess Current NETCONF server over SSH access state. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.146 |
| agNewRFC4741NetconfSshAccess Enable/disable NETCONF server over SSH access state. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.147 |
| agCurRFC4741NetconfSshPort The TCP port number that the NETCONF server over SSH is listening to
in the current configuration block. | scalar | Integer32 | .1.3.6.1.4.1.20301.2.7.15.1.1.1.148 |
| agNewRFC4741NetconfSshPort The TCP port number that the NETCONF server over SSH is listening to
in the new configuration block. | scalar | Integer32 | .1.3.6.1.4.1.20301.2.7.15.1.1.1.149 |
| agRtcTime The time on the real time clock in the form of 'hh:mm:ss'.
A zero length string is returned if time is not available. | scalar | OctetString | .1.3.6.1.4.1.20301.2.7.15.1.1.1.15 |
| agCurCfgLFDStatus This object indicates whether the system will put any port
in an error-disabled state due to excessive link flaps.
A port will be put in an error-disabled state due to … | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.158 |
| agNewCfgLFDStatus This object indicates whether the system should put any port
in an error-disabled state due to excessive link flaps.
Use this object to change the global setting of the Link
Flap … | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.159 |
| agLastSetErrorReason The error reason of the last SET failure. | scalar | OctetString | .1.3.6.1.4.1.20301.2.7.15.1.1.1.16 |
| agCurCfgLFDFlaps This object indicates the maximum number of flaps allowed
in a time period set by agCurCfgLFDTime. | scalar | Integer32 | .1.3.6.1.4.1.20301.2.7.15.1.1.1.160 |
| agNewCfgLFDFlaps This object specifies the maximum number of flaps that should
be allowed in a time period. Use this object to change the
global maximum number of flaps allowed in a time period. | scalar | Integer32 | .1.3.6.1.4.1.20301.2.7.15.1.1.1.161 |
| agCurCfgLFDTime This object indicates the length of time period in seconds
during which link flaps are counted. | scalar | seconds Integer32 | .1.3.6.1.4.1.20301.2.7.15.1.1.1.162 |
| agNewCfgLFDTime This object specifies the length of time period in seconds
that should be used to count link flaps. | scalar | seconds Integer32 | .1.3.6.1.4.1.20301.2.7.15.1.1.1.163 |
| agCurCfgTrapSrcLoopIf The index of the loopback interface that should be used
for the source IP of the SNMP trap; 0 means that
no loopback interface is used as the source of the SNMP trap. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.20301.2.7.15.1.1.1.164 |
| agNewCfgTrapSrcLoopIf The index of the loopback interface that should be used
for the source IP of the SNMP trap; 0 means that
no loopback interface is used as the source of the SNMP trap. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.20301.2.7.15.1.1.1.165 |
| agCfgMtm This object specifies the new value for MTM.
The available MTM values are:
1455-64F (1)
7309-DFX (2)
7309-DRX (3)
7309-HCM (4)
7309-HCK (5)
7120-64F (6) | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.166 |
| agCurCfgHttpServerPort The TCP port number that the HTTP server is listening to
in the current configuration block. | scalar | Integer32 | .1.3.6.1.4.1.20301.2.7.15.1.1.1.17 |
| agNewSecurityMode This is an action object to change switch security mode. There are thtree
security modes for IBM switch: strict mode, compatibility mode and strict mode
with SNMP not comply.
… | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.177 |
| agNewCfgSslVersionLevel New status of SSL Server Minimum Acceptable Protocol Version. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.178 |
| agCurCfgSslVersionLevel Current status of SSL Server Minimum Acceptable Protocol Version. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.179 |
| agNewCfgHttpServerPort The TCP port number that the HTTP server is listening to
in the new configuration block. | scalar | Integer32 | .1.3.6.1.4.1.20301.2.7.15.1.1.1.18 |
| agCurSecurityMode This is an action object to change switch security mode. There are thtree
security modes for IBM switch: strict mode, compatibility mode and strict mode
with SNMP not comply.
… | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.180 |
| agCurCfgLoginBanner The user defined login banner. | scalar | OctetString | .1.3.6.1.4.1.20301.2.7.15.1.1.1.19 |
| agApplyConfiguration This is an action object to apply the changes made to configuration
of the switch. By setting the value to apply(2), all the changes
made since the last apply are written to the n… | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.2 |
| agNewCfgLoginBanner The user defined login banner. | scalar | OctetString | .1.3.6.1.4.1.20301.2.7.15.1.1.1.20 |
| agCurCfgConsole Enable or disable console output of syslog messages. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.23 |
| agNewCfgConsole Enable or disable console output of syslog messages. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.24 |
| agSavePending This object, when read, gives the user information
whether an save action is needed and that the configuration
has been applied but not saved to the flash. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.3 |
| agNewCfgBootp Enable or disable the use of BootP, in the new configuration block. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.30 |
| agSlotNumber Identifies the slot in which this switch is installed. If the
agent implementing this MIB is not a blade in a chassis this
value has no meaning. | scalar | Integer32 | .1.3.6.1.4.1.20301.2.7.15.1.1.1.31 |
| agCurCfgSnmpTimeout Once SNMP operations like agApplyConfig, agDiffState and
agDumpState, which use the state machine are done the resources
used by these operations need to be freed by setting the s… | scalar | Integer32 | .1.3.6.1.4.1.20301.2.7.15.1.1.1.32 |
| agNewCfgSnmpTimeout Once SNMP operations like agApplyConfig, agDiffState and
agDumpState, which use the state machine are done the resources
used by these operations need to be freed by setting the s… | scalar | Integer32 | .1.3.6.1.4.1.20301.2.7.15.1.1.1.33 |
| agCurCfgTelnetServerPort The TCP port number that the telnet server listens for telnet
sessions. | scalar | Integer32 | .1.3.6.1.4.1.20301.2.7.15.1.1.1.34 |
| agNewCfgTelnetServerPort The TCP port number that the telnet server listens for telnet
sessions. | scalar | Integer32 | .1.3.6.1.4.1.20301.2.7.15.1.1.1.35 |
| agClearFlashDump This is an action object to clear the FLASH dump.
ok(1) is returned when this object is read. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.36 |
| agCurCfgTrapSrcIf The SNMP trap source interface number. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.20301.2.7.15.1.1.1.39 |
| agSaveConfiguration This is an action object to write current configuration to
nonvolatile storage.
When issued with the saveActive, the active configuration
in flash is saved to backup in… | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.4 |
| agNewCfgTrapSrcIf The SNMP trap source interface number. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.20301.2.7.15.1.1.1.40 |
| agCurCfgHttpsServerPort The TCP port number that the HTTPS server is listening to
in the current configuration block. | scalar | Integer32 | .1.3.6.1.4.1.20301.2.7.15.1.1.1.49 |
| agRevert This is an action object to revert the unapplied changes
made to the switch. By setting the value to revert(2),
all the unapplied changes will be reverted. This action
will copy t… | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.5 |
| agNewCfgHttpsServerPort The TCP port number that the HTTPS server is listening to
in the new configuration block. | scalar | Integer32 | .1.3.6.1.4.1.20301.2.7.15.1.1.1.50 |
| agCurCfgTftpServerPort The TCP port number that the TFTP server is listening to
in the current configuration block. | scalar | Integer32 | .1.3.6.1.4.1.20301.2.7.15.1.1.1.51 |
| agNewCfgTftpServerPort The TCP port number that the TFTP server is listening to
in the new configuration block. | scalar | Integer32 | .1.3.6.1.4.1.20301.2.7.15.1.1.1.52 |
| agRackId The rack unique identifier. | scalar | OctetString | .1.3.6.1.4.1.20301.2.7.15.1.1.1.53 |
| agChassis Chassis serial number. | scalar | OctetString | .1.3.6.1.4.1.20301.2.7.15.1.1.1.54 |
| agCurTimeZone The time zone.
Note: Locations are alphabetically ordered and
the corresponding code is not reflected in CLI. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.55 |
| agNewTimeZone The time zone.
Note: Locations are alphabetically ordered and
the corresponding code is not reflected in CLI. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.56 |
| agCurCfgIdleCLITimeout Set idle CLI sessions timeout. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.20301.2.7.15.1.1.1.57 |
| agNewCfgIdleCLITimeout Set idle CLI sessions timeout. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.20301.2.7.15.1.1.1.58 |
| agRevertApply This is an action object to revert the unsaved changes
made to the switch. By setting the value to revertApply(2),
all the unsaved as well as unapplied changes will be
reverted.
… | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.6 |
| agCurCfgHttpsServerAccess Current HTTPS server access state. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.62 |
| agNewCfgHttpsServerAccess Enable/disable HTTPS server access. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.63 |
| agCurBootNxtCliMode Current boot mode. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.64 |
| agNewBootNxtCliMode Next cli boot mode. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.65 |
| agCurHttpAcces Current HTTP server access state. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.66 |
| agNewHttpAcces New HTTP server access state. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.67 |
| agCurCfgDhcp Enable or disable the use of DHCP, as currently configured in the
current configuration block. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.68 |
| agNewCfgDhcp Enable or disable the use of DHCP, in the new configuration block. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.69 |
| agReset This is an action object to reboot the agent.
other(1) is returned always when read. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.7 |
| agCurCfgReminders Current status of reminders feature. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.70 |
| agNewCfgReminders Enable or disable reminders feature. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.71 |
| agCurCfgHprompt Current status of hprompt. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.72 |
| agNewCfgHprompt New status of hprompt. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.73 |
| agCurCfgUserBBI Current status of user configuration from BBI. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.74 |
| agNewCfgUserBBI New status of user configuration from BBI. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.75 |
| agCurBootNxtCliModePrompt Current status of selectable CLI mode prompt. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.76 |
| agNewBootNxtCliModePrompt Next status of selectable CLI mode prompt. | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.77 |
| agCurCfgLoginNotice The user defined login notice. | scalar | OctetString | .1.3.6.1.4.1.20301.2.7.15.1.1.1.78 |
| agNewCfgLoginNotice The user defined login notice. | scalar | OctetString | .1.3.6.1.4.1.20301.2.7.15.1.1.1.79 |
| agConfigForNxtReset The configuration information to be loaded from at next reset.
The following values are writable:
active(2)...active configuration block
backup(3)...backup conf… | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.8 |
| agImageForNxtReset The software image to be booted from at next reset.
The following values are writable:
image1(2)...image 1
image2(3)...image 2 | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.9 |
| agCurCfgSysCustomDstState The current status of Custom DST | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.98 |
| agNewCfgSysCustomDstState Enable/disable Custom DST | scalar | Enumeration | .1.3.6.1.4.1.20301.2.7.15.1.1.1.99 |