aclCurCfg8021pPriority
IBM-GbTOR-G8264CS-MIB ·
.1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.17
Object
column
Enumeration
The 802.1p priority to be filtered.
Context
- MIB
- IBM-GbTOR-G8264CS-MIB
- OID
.1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.17- Type
- column
- Access
- readonly
- Status
- current
- Parent
- aclCurCfgEntry
- Table
- aclCurCfgTable
- Siblings
- 42
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aclCurCfgIndex The index associated with this ACL entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.1 |
| aclCurCfgSrcMACMask The address mask applied to aclCurCfgSrcMACAddress for filtering. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.10 |
| aclCurCfgDstMACAddress The destination MAC address to be filtered. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.11 |
| aclCurCfgDstMACMask The address mask applied to aclCurCfgDstMACAddress for filtering. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.12 |
| aclCurCfgEthernetTypeName The Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.13 |
| aclCurCfgEthernetTypeValue The Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is othe… | column | Integer32 | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.14 |
| aclCurCfgVLanId The virtual LAN identifier to be filtered. | column | Integer32 | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.15 |
| aclCurCfgVLanMask The mask applied to aclCurCfgVLanId for filtering. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.16 |
| aclCurCfgTypeOfService The type of service to be filtered.
'none' for not initialised, within the
range 0-255 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.18 |
| aclCurCfgProtocol The protocol to be filtered.
'none' for not initialised, within the
range 0-255 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.19 |
| aclCurCfgSrcIPAddress The source IP address to be filtered. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.20 |
| aclCurCfgSrcIPMask The address mask applied to aclCurCfgSrcIPAddress for filtering. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.21 |
| aclCurCfgDstIPAddress The destination IP address to be filtered. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.22 |
| aclCurCfgDstIPMask The address mask applied to aclCurCfgDstIPAddress for filtering. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.23 |
| aclCurCfgSrcPort The source TCP/UDP port number to be filtered. | column | Integer32 | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.24 |
| aclCurCfgSrcPortMask The mask applied to aclCurCfgSrcPort for filtering. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.25 |
| aclCurCfgDstPort The destination TCP/UDP port number to be filtered. | column | Integer32 | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.26 |
| aclCurCfgDstPortMask The mask applied to aclCurCfgDstPort for filtering. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.27 |
| aclCurCfgTCPFlags The TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
… | column | Bits | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.28 |
| aclCurCfgEgressPorts The port list in the ACL configured for egress filtering.
The ports are presented in bitmap format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx ....… | column | OctetString | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.29 |
| aclCurCfgGroup The index of the ACL group to which this ACL entry is a member of.
A value of zero means the ACL is not a member of any group. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.3 |
| aclCurCfgStatistics Whether statistics collection for this ACL is enabled or not. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.30 |
| aclCurCfgTCPFlagsMask The TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
… | column | Bits | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.39 |
| aclCurCfgFilterAction The action to be performed on a packet that matches the filter
settings of this ACL entry. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.4 |
| aclCurCfgMeterAction Meter Action for this ACL. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.41 |
| aclCurCfgMeterEnable Meter state for this ACL. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.42 |
| aclCurCfgKbitsSec The commited rate of meter associated with this ACL entry. | column | Unsigned32 | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.43 |
| aclCurCfgKbitsBurst The maxmium burst sizeof meter associated with this ACL entry. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.44 |
| aclCurCfgUser Set user defined priority for this ACL. | column | Integer32 | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.45 |
| aclCurCfgInprofDscp Set in profile pkts DSCP value. | column | Integer32 | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.46 |
| aclCurCfgTos To enable/disable setting pkts based on TOS bits. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.47 |
| aclCurCfgOutprofDscp Set out profile pkts DSCP value. | column | Integer32 | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.48 |
| aclCurCfgUserEnable Set update method for this ACL. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.49 |
| aclCurCfgFilterActionSetPrio The value to be used when the action to be performed is setprio
for this ACL entry. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.5 |
| aclCurCfgInprofDscpEnable Whether in profile update DSCP for this ACL is enabled or not. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.50 |
| aclCurCfgOutprofDscpEnable Whether out profile update DSCP for this ACL is enabled or not. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.51 |
| aclCurCfgEthFmt The packet ethernet format to be filtered. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.6 |
| aclCurCfgTagFmt The packet tag format to be filtered. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.7 |
| aclCurCfgMirrorPort Set port in the ACL for mirroring.
n > 0 - the represented port is configured for mirroring.
0 - the represented port is not configured for mirroring. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.74 |
| aclCurCfgIPFmt The packet IP format to be filtered. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.8 |
| aclCurCfgLog Whether log for this ACL is enabled or not. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.81 |
| aclCurCfgSrcMACAddress The source MAC address to be filtered. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.20301.2.7.15.9.1.1.1.1.9 |