ipNewCfgIntfAdvIntervalMin
IBM-GbTOR-10G-L2L3-MIB ·
.1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.20
Object
column
r/w
Integer32
Set the IPv6 Router Advertisement Minimum interval limit of the interface.
Context
- MIB
- IBM-GbTOR-10G-L2L3-MIB
- OID
.1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.20- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ipNewCfgIntfEntry
- Table
- ipNewCfgIntfTable
- Siblings
- 23
Syntax
Integer32
Values & Constraints
Object Constraints
range: 3-1350
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ipNewCfgIntfIndex The interface number for which the IP information is related. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.1 |
| ipNewCfgIntfRouteAdv Enable/disable route advertisement of the interface. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.13 |
| ipNewCfgIntfManagedCfg Enable/disable Managed config flag of the interface, which
allows the host to use DHCP for address configuration. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.14 |
| ipNewCfgIntfOtherCfg Enable/disable Other config flag of the interface,
which allows the host to use DHCP for other stateful configuration. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.15 |
| ipNewCfgIntfAdvLifetime Set Router Advertisement lifetime of the interface. | column | Integer32 | .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.16 |
| ipNewCfgIntfDadAttempts Set the number of duplicate address detection (dad)
attempts of the interface. | column | Integer32 | .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.17 |
| ipNewCfgIntfReachTime Set the advertised reachability time of the interface in ms. | column | Unsigned32 | .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.18 |
| ipNewCfgIntfAdvInterval Set the IPv6 Router Advertisement interval of the interface. | column | Integer32 | .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.19 |
| ipNewCfgIntfAddr This field configures the new IP/IPv6 addr of the interface.
Address should be IPv4 dotted-quads or IPv6 16-byte hexadecimal
colon notation.
Valid IPv6 address should be in any o… | column | OctetString | .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.2 |
| ipNewCfgIntfRetransmitTimer Set the IPv6 Router Advertisement Retransmit Timer in ms. | column | Unsigned32 | .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.21 |
| ipNewCfgIntfHopLimit Set the IPv6 Router Advertisement Current Hop Limit | column | Integer32 | .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.22 |
| ipNewCfgIntfAdvMtu Enable/disable Advertise MTU option. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.23 |
| ipNewCfgIntfIp6Host Enable/disable IPv6 host mode on the interface. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.24 |
| ipNewCfgSecIntfAddr This field configures the new IPv6 addr of the interface.
Address should be in IPv6 4-byte haxadecimal
colon notation.
Valid IPv6 address should be in any of the following forms
… | column | OctetString | .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.26 |
| ipNewCfgSecIntfPrefix The IPv6 prefix length (integer in range 0..128)
associated with this IP address . | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.27 |
| ipNewCfgIntfAnycast This field has the value of anycast(1) if IPv6 interface address
is anycast and none(2) if not. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.28 |
| ipNewCfgSecIntfAnycast This field has the value of anycast(1) if secondary IPv6 interface address
is anycast and none(2) if not. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.29 |
| ipNewCfgIntfMask The subnet mask as IPv4 dotted-quads OR
the IPv6 prefix length (integer in range 0..128)
associated with this IP address . | column | OctetString | .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.3 |
| ipNewCfgIntfIp6Dstun Enable/disable sending of ICMP Unreachable messages. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.30 |
| ipNewCfgIntfVlan The VLAN associated with the interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.5 |
| ipNewCfgIntfState The state of the interface. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.6 |
| ipNewCfgIntfDelete When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of… | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.7 |
| ipNewCfgIntfBootpRelay Enable/disable BOOTP relay. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.3.1.1.3.1.8 |