hwMD5500PSTNPortCurrent
HWMUSA-UP-MIB ·
.1.3.6.1.4.1.2011.2.6.4.4.6.3.1.9
Object
column
r/w
Integer32
Port current supported by the board. The value ranges from 1 to 17,
which indicates the port current value supported under certain loopline impedance.
1 -- 25mA steady current
2 -- 16mA steady current
3 -- 32mA steady current
4 -- 40mA steady current
5 -- 35mA 2*200 ohm
6 -- 35mA 2*250 ohm
7 -- 35mA 2*400 ohm
8 -- 47mA 2*200 ohm
9 -- 47mA 2*250 ohm
10 -- 47mA 2*400 ohm
11 -- 20mA 2*200 ohm
12 -- 20mA 2*250 ohm
13 -- 20mA 2*400 ohm
14 -- 30mA 2*200 ohm
15 -- 30mA 2*250 ohm
16 -- 30mA 2*400 ohm
17 -- 40mA 2*200 ohm
18 -- 40mA 2*250 ohm
19 -- 40mA 2*400 ohm
The current values of the ports on the board are as follows.
The following values indicate the current values for different loop resistances of loop lines (for example 2*400 ?).
1 -- 25mA constant current
2 -- 16mA constant current
3 -- 32mA constant current
4 -- 40mA constant current
5 -- 35mA 2*200 ohm
6 -- 35mA 2*250 ohm
7 -- 35mA 2*400 ohm
8 -- 47mA 2*200 ohm
9 -- 47mA 2*250 ohm
10 -- 47mA 2*400 ohm
11 -- 20mA 2*200 ohm
12 -- 20mA 2*250 ohm
13 -- 20mA 2*400 ohm
14 -- 30mA 2*200 ohm
15 -- 30mA 2*250 ohm
16 -- 30mA 2*400 ohm
17 -- 40mA 2*200 ohm
18 -- 40mA 2*250 ohm
19 -- 40mA 2*400 ohm
Context
- MIB
- HWMUSA-UP-MIB
- OID
.1.3.6.1.4.1.2011.2.6.4.4.6.3.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwPstnPortAttrEntry
- Table
- hwPstnPortAttrTable
- Siblings
- 21
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-19
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwMD5500PSTNPortVoiceGain Options:
1.high(1) -indicates the VoiceGain of the PSTN port is high
2.low(2) -indicates the VoiceGain of the PSTN port is low
3.range1(3) -… | column | Enumeration | .1.3.6.1.4.1.2011.2.6.4.4.6.3.1.1 |
| hwMD5500PSTNPortDCTime Disconnect clear time (*10 ms). | column | Integer32 | .1.3.6.1.4.1.2011.2.6.4.4.6.3.1.10 |
| hwMD5500PSTNPortFSKDelayInterval Time length of the delay for transmitting the FSK calling number (unit: 10 ms). | column | Integer32 | .1.3.6.1.4.1.2011.2.6.4.4.6.3.1.12 |
| hwMD5500PSTNPortActualGain Port actual gain. | column | Integer32 | .1.3.6.1.4.1.2011.2.6.4.4.6.3.1.13 |
| hwMD5500PSTNPortCidTransWhen Options:
1.after-ring(1) -After ringing
2.before-ring(2) -Before ringing | column | Enumeration | .1.3.6.1.4.1.2011.2.6.4.4.6.3.1.14 |
| hwMD5500PSTNPortCidFormat Options:
1.sdmf-fsk(1) -sdmf (FSK simple data message format)
2.mdmf-fsk(2) -mdmf (FSK multi-data message format)
3.dtmf(3) -dtmf (DTMF format)
4.r15(4) -R1.5 | column | Enumeration | .1.3.6.1.4.1.2011.2.6.4.4.6.3.1.15 |
| hwMD5500PSTNPortCidReversePole The polarity reversal is sent before the calling number is transmitted.
Options:
1.notsend(1)-not send
2.send(2)-send | column | Enumeration | .1.3.6.1.4.1.2011.2.6.4.4.6.3.1.16 |
| hwMD5500PSTNPortAGCEnableMarker Options:
1.agcDisable(1) -Disable the auto gain control
2.agcEnable(2) -Enable the auto gain control | column | Enumeration | .1.3.6.1.4.1.2011.2.6.4.4.6.3.1.17 |
| hwMD5500PSTNPortAGCEnableLevel Automatic gain control parameter setting.
0-15 maps -9 dbm0 to -24 dbm0.
The default value is 13. | column | Integer32 | .1.3.6.1.4.1.2011.2.6.4.4.6.3.1.18 |
| hwMD5500PSTNPortSNSEnableMarker Options:
1.snsDisable(1) -Disable
2.snsEnable(2) -Enable | column | Enumeration | .1.3.6.1.4.1.2011.2.6.4.4.6.3.1.19 |
| hwMD5500PSTNPortAttribute0 Options:
1.nolimt(1) -indicates the attribute of the PSTN port is nolimt
2.limt(2) -indicates the attribute of the PSTN port is limt
3.mode-DTM… | column | Enumeration | .1.3.6.1.4.1.2011.2.6.4.4.6.3.1.2 |
| hwMD5500PSTNPortSNSEnableLevel Spectral noise suppression parameter setting (6 db-20 db).
The default value is 12 db. | column | Integer32 | .1.3.6.1.4.1.2011.2.6.4.4.6.3.1.20 |
| hwMD5500PSTNPortDspInputGain DSP input gain of PSTN port parameter setting (PCM->IP, 1-16 correspond to -10 db to +5 db).
The default value is 11. | column | Integer32 | .1.3.6.1.4.1.2011.2.6.4.4.6.3.1.21 |
| hwMD5500PSTNPortDspOutputGain DSP output gain of PSTN port parameter setting (IP->PCM, 1-21 correspond to -10 db to +10 db).
The default value is 11. | column | Integer32 | .1.3.6.1.4.1.2011.2.6.4.4.6.3.1.22 |
| hwMD5500PSTNPortlinelock Whether the port can be locked or not. 1. cannot be locked; 2. can be locked.
Options:
1.disable(1) -disable
2.enable(2) -enable | column | Enumeration | .1.3.6.1.4.1.2011.2.6.4.4.6.3.1.23 |
| hwMD5500PSTNPortAttribute1 Options:
1.notsupport(1) -indicates the attribute of the PSTN port is not supported
2.support(2) -indicates the attribute of the PSTN port is supported | column | Enumeration | .1.3.6.1.4.1.2011.2.6.4.4.6.3.1.3 |
| hwMD5500PSTNPortRowStatus indicates the row status. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.2.6.4.4.6.3.1.4 |
| hwMD5500PSTNPortReversePoleLevel indicates the reverse pole level of the PSTN port of md5500 | column | Integer32 | .1.3.6.1.4.1.2011.2.6.4.4.6.3.1.5 |
| hwMD5500PSTNPortLReversePoleEnable Options:
1.reversePoleDisable(1) -indicates the reverse pole level of the port is disable
2.reversePoleEnable(2) -indicates the reverse pole level of the port is enbale | column | Enumeration | .1.3.6.1.4.1.2011.2.6.4.4.6.3.1.6 |
| hwMD5500PSTNPortUserType Options:
1.del(1) -indicates the del user
2.lcpbx(2) -indicates the loop calling PBX
3.ecpbx(3) -indicates the earth calling PBX
4.payphone(4) -indicates the paypho… | column | Enumeration | .1.3.6.1.4.1.2011.2.6.4.4.6.3.1.7 |
| hwMD5500PSTNPortImpedance Port impedance of the port. The following values indicate different impedances in
different application circumstances.
1 -- Bureau machine in China (200+680|| 100nf)
2 -… | column | Integer32 | .1.3.6.1.4.1.2011.2.6.4.4.6.3.1.8 |