hwXponProfOntPortLearnedHGMacAddr
HUAWEI-XPON-TRAP-MIB ·
.1.3.6.1.4.1.2011.6.128.1.1.11.521
Object
scalar
OctetString
This object indicates the MAC address learned on the ONT port.
Context
- MIB
- HUAWEI-XPON-TRAP-MIB
- OID
.1.3.6.1.4.1.2011.6.128.1.1.11.521- Type
- scalar
- Access
- notifyonly
- Status
- current
- Parent
- hwXponDeviceTrapsVbOids
- Siblings
- 40
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-6
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwGponProfOntTDMPortAlarmType This object indicates the alarm type.
Options:
1. Transmit failure (TF),
2. Loss of frame (LOF),
3. Out of frame (OOF),
4. Remote alarm indication (RAI),
5. 2.048 Mbit/s alarm ind… | scalar | OctetString | .1.3.6.1.4.1.2011.6.128.1.1.11.1 |
| hwXponOntMask This object indicates the ONT MASK. | scalar | OctetString | .1.3.6.1.4.1.2011.6.128.1.1.11.2 |
| hwXponDeviceOltChipsetId This object indicates only the MAC chipset ID on the board. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.128.1.1.11.250 |
| hwEponDeviceAutoFindOntInfoLoidValue This object indicates the logic ONT ID. | scalar | OctetString | .1.3.6.1.4.1.2011.6.128.1.1.11.251 |
| hwEponDeviceAutoFindOntInfoCheckcodeValue This object indicates the check code. | scalar | OctetString | .1.3.6.1.4.1.2011.6.128.1.1.11.252 |
| hwEponDeviceOntVoltageState This object indicates the voltage state.
Options:
1. higher(0) - Indicates that the voltage state is higher
2. lower(1) - Indicates that the voltage state is lower
3. unknown… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.11.253 |
| hwEponDeviceOntTypeDSupport This object indicates whether the ONT supports type D protection.
Options:
1. support(1) - Support the ONT supports type D protection
2. notsupport(2) - Do not support the … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.11.254 |
| hwEponDeviceAutoFindOntInfoTdmNumber This object indicates the auto find ont info TDM number. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.11.255 |
| hwEponDeviceAutoFindOntInfoPotsNumber This object indicates the uto find ont info pots number. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.11.256 |
| hwEponDeviceAutoFindOntInfoFeNumber This object indicates the auto find ont info FE number. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.11.257 |
| hwEponDeviceAutoFindOntInfoGeNumber This object indicates the auto find ont info GE number. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.11.258 |
| hwEponDeviceOntEquipmentId This object indicates the auto find ont info GE number. | scalar | OctetString | .1.3.6.1.4.1.2011.6.128.1.1.11.259 |
| hwGponProfOltDualparentWorkState This object indicates the work status.
Options:
1. active(1) - The work status is active
2. standby(2) - The work status is standby
3. fault(3) - The work status is… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.11.3 |
| hwXponProfOntOpticalMoudleAlarmType This object indicates the alarm type,
Options:
1. rxPower(1) - The alarm type is rxPower
2. txPower(2) - The alarm type is txPower
3. voltage(3) … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.11.4 |
| hwXponProfOntOpticalMoudleAlarmUpperValue This object indicates the upper threshold(Value:-1024.00~1024.00). | scalar | OctetString | .1.3.6.1.4.1.2011.6.128.1.1.11.5 |
| hwXponTrapOperType This object indicates the operation type.
Options:
1. add(1) - Add
2. modify(2) - Modify
3. delete(3) - Delete | scalar | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.11.502 |
| hwXponDeviceOntPortRunStatus This object indicates the ONT port run status.
The value 1 means that the ONT port is up,
the value 2 means that the ONT port is down. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.11.503 |
| hwXponOntLoadResult This object indicates the load result.
Options:
1. success(0) - Indicates that the load result is success
2. fail(1) - Indicates that the load result is f… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.11.504 |
| hwXponOntLoadCrcSupport This object indicates whether the ONT load supports the CRC.
Options:
1. noSupport(0) - Do not support the ONT load supports the CRC
2. support(1) - Support the ONT load s… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.11.505 |
| hwXponOntLoadCrcValue This object indicates the CRC value of the loaded ONT configuration file.
The value (-1) indicates that the ont does not support CRC or value is invalid. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.11.506 |
| hwXponDeviceOntCRCSupport This object indicates whether the ONT supports the CRC.
Options:
1. noSupport(0) - If the value of this object is 0, it indicates that the CRC function is not supported
2. support… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.11.507 |
| hwXponDeviceOntCRCCode This object indicates the code of ONT CRC, it is valid only the ont support CRC check.
Otherwise, the value always equals 0. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.11.508 |
| hwXponOntLoadOperType This object indicates the operations type of the ONT load.
The value 1 indicates loading the configuration or application file,
the value 2 indicates the checked result of the con… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.11.509 |
| hwXponDeviceOntRunStatus This object indicates the running status of ONT load.
Options:
1. up(1) - Indicates that the running status of ONT load is up
2. down(2) - Indicates that the running status … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.11.510 |
| hwEponRogueOntDetectOperStatus This object indicates the operation status of the EPON rogue ONT detection.
Options:
1. start(1) - Start the EPON rogue ONT detection
2. over(2) - Stop the EPON rogue ONT det… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.11.511 |
| hwEponDeviceOntPortManageStatus This object indicates the running status of the EPON ONT port.
Options:
1. unlock(1) - Unlock the EPON ONT port
2. lock(2) - Lock the EPON ONT port | scalar | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.11.512 |
| hwXponDeviceAccessType This object indicates the XPON profile type.
Options:
1. gpon(1) - GPON
2. epon(2) - EPON | scalar | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.11.513 |
| hwXponDeviceServiceProfileName This object indicates the service profile name. | scalar | OctetString | .1.3.6.1.4.1.2011.6.128.1.1.11.514 |
| hwXponDeviceLineProfileName This object indicates the line profile name. | scalar | OctetString | .1.3.6.1.4.1.2011.6.128.1.1.11.515 |
| hwEponDeviceAlarmProfileName This object indicates the alarm profile name. | scalar | OctetString | .1.3.6.1.4.1.2011.6.128.1.1.11.516 |
| hwEponDeviceOntDbaStatus This object indicates the status of Ont's DBA.
Options:
1. dbaGpon(1) - Indicates that the status of Ont's DBA is GPON DBA
2. dbaEthernet(2) - Indicates that the status of O… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.11.517 |
| hwGponDeviceProfOntIsOntUpfromReset This object indicates whether the GPON ONT is online after reset.
Options:
1. yes(1) - The ONT is reseted.
2. no(2) - The ONT is not reseted. | scalar | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.11.518 |
| hwEponDeviceOntIsOntUpfromReset This object indicates whether the EPON ONT is online after reset.
Options:
1. yes(1) - The ONT is reseted.
2. no(2) - The ONT is not reseted. | scalar | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.11.519 |
| hwXponProfOntPortLearnedHGVlan This object indicates the VLAN learned on the ONT port. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.128.1.1.11.520 |
| hwEponAlarmProfileStatisticsItem This object indicates the Epon alarm profile statistics item. | scalar | OctetString | .1.3.6.1.4.1.2011.6.128.1.1.11.522 |
| hwEponAlarmProfileThresholdValue This object indicates the Epon alarm profile threshold value(Value:0~4294967294). | scalar | OctetString | .1.3.6.1.4.1.2011.6.128.1.1.11.523 |
| hwEponAlarmProfileCurrentValue This object indicates the current value(Value:0~18446744073709551614). | scalar | OctetString | .1.3.6.1.4.1.2011.6.128.1.1.11.524 |
| hwXponProfOntOpticalMoudleAlarmLowerValue This object indicates the lower threshold(Value:-1024.00~1024.00). | scalar | OctetString | .1.3.6.1.4.1.2011.6.128.1.1.11.6 |
| hwXponProfOntOpticalMoudleAlarmCurrentValue This object indicates the current value(Value:-1024.00~1024.00). | scalar | OctetString | .1.3.6.1.4.1.2011.6.128.1.1.11.7 |
| hwGponProfOntDualUpstreamSupport This object indicates whether the ONT supports type C protection.
Options:
1. support(1) - Support the ONT supports type C protection
2. notsupport(2) - Do not support the … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.11.8 |