hwXponOltTrafficThresholdTraffic
HUAWEI-XPON-TRAP-MIB ·
.1.3.6.1.4.1.2011.6.145.2.60
Object
This object indicates the threshold traffic value of the congestion detection.
Context
- MIB
- HUAWEI-XPON-TRAP-MIB
- OID
.1.3.6.1.4.1.2011.6.145.2.60- Type
- scalar
- Access
- notifyonly
- Status
- current
- Units
- mbps
- Parent
- hwXponCommonTrapsVbOids
- Siblings
- 72
Syntax
mbps SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwXponOntTransmittingOperType ONT transmitting operation type. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.1 |
| hwXponCommonDeviceAverageDelay The average delay of the ont remote ping(milli-seconds). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.10 |
| hwXponModeSwitchResult The XPON mode switch result.
Options:
1. success(0) - The XPON mode switch successful
2. systemBusy(1) - System busy
3. dataSynIncomplete(2) - Data s… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.2.11 |
| hwXponConfigMode The XPON configuration mode.
Options:
1. distributeMode(0) - Distribute mode
2. profileMode(1) - Profile mode | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.2.12 |
| hwXponOltMinBandwidth Minimum bandwidth,Unit: kbps.
0xffff --indicates has not set the minimum bandwidth | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.13 |
| hwXponOltNearestDistance Nearest distance,Unit: km | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.14 |
| hwXponOltFarestDistance Farthest distance,Unit: km | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.15 |
| hwXponOltAutoFindOntFlag Autofind flag.
Options:
1. open(1) - Open autofind ONT
2. close(2) - Close autofind ONT | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.2.16 |
| hwXponOltAutoUpdateOntFlag Auto update flag.
-1 --indicates currently not supported ONT auto update | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.17 |
| hwXponOltDownFecEnableFlag FEC downstream check flag.
Options:
1. open(1) - Open FEC downstream check
2. close(2) - Close FEC downstream check | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.2.18 |
| hwGponOntPortTDMCodeMode TDM port coding style
Options:
1. ami(1) - Using AMI coding
2. hdb3(2) - Using HDB3 coding
3. invalid (-1) - Indicates that the query fails or no i… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.2.19 |
| hwXponOntTransmittingCrc CRC of ONT transmitting. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.2 |
| hwGponOntPortManagementStatus ONT port management state
Options:
1. unlock(1) - Unlock state, all user functions of this circuit pack are normal
2. lock(2) - All user functions of this circuit pack are block… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.2.20 |
| hwGponOntE1PortLoopback Ont's TDM port loop back.
The value (-1) indicates that the query fails. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.22 |
| hwGponOntPortVlanDefault Default vlan ID of the ONT ETH port(s). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.23 |
| hwGponOntPortVlanDefaultPriority Default priority of the ONT ETH port(s). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.24 |
| hwXponOntPppoeSimuResult This object indicates the result of PPPoE test.
Options:
1. success(1) - Indicates the PPPoE test is successful.
2. paramNegoFail(2) - Indicates paramete… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.2.25 |
| hwXponOntPppoeSimuResultSessionId The Session ID of PPPoE test. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.26 |
| hwXponOntPppoeSimuResultUserIp The User IP of PPPoE test. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.145.2.27 |
| hwXponOntPppoeSimuResultGatewayIp The Gateway IP of PPPoE test. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.145.2.28 |
| hwXponCommonDeviceReceivedICMPErrorCode This object indicates the received ICMP error code. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.29 |
| hwXponCommonDeviceOntPingResult The result of the ONT remote ping.
Options:
1. success(1) - The ONT remote ping successful
2. failure(2) - Failed in the ONT remote ping
3. une… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.2.3 |
| hwXponOltChangePasswordIntervalTime Ont's password renew time interval,Unit: minutes. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.30 |
| hwXponRogueOntManualDetectState This object indicates the state of rogue ONT manual detect.
Options:
1. finished(0) - Has finished detecting.
2. unknown(-1) - The detecting state … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.2.31 |
| hwXponCommonOntFECUncorrectCodeWordsThreshold This object indicates the threshold of the code words that were not corrected by
the FEC function. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.32 |
| hwXponCommonOntFECCorrectCodeWordsThreshold This object indicates the threshold of the code words that were corrected by
the FEC function. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.33 |
| hwXponAlarmUpperCountThreshold This object indicates the Upper threshold. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.34 |
| hwXponAlarmLowerCountThreshold This object indicates the Lower threshold. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.35 |
| hwXponAlarmCurrentCountValue This object indicates the Current Value.
-1 indicates the invalid value. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.36 |
| hwXponOntRegisterSn This object indicates the ONT serial number. | scalar | OctetString | .1.3.6.1.4.1.2011.6.145.2.37 |
| hwFrameIndexOfNewConnectedOnt The index of a shelf in the device. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.145.2.38 |
| hwSlotIndexOfNewConnectedOnt A slot index is used to identify the location of a board in a shelf. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.145.2.39 |
| hwXponCommonDeviceSentPackets The packet of the ont send. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.4 |
| hwPortIndexOfNewConnectedOnt Port index, indicating the physical number of the port on a board. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.145.2.40 |
| hwXponOntFirstOnline This object indicates the state of rogue ONT manual detect.
Options:
1. FirstOnline(1) - The ont is online firstly.
2. NotFirstOnline(2) - The ont is … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.41 |
| hwGponTypeBDParentRogueOntStatus This object indicates the status of the GPON rogue ONTs.
Options:
1. rogueOntExist(1) - GPON rogue ONTs are detected
2. rogueOntNotExist(2) - GPON rogue ONTs are not dete… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.2.42 |
| hwXponDeviceOltPortList This object indicates the port list on the OLT device. The port list format is such as '0,1'. | scalar | OctetString | .1.3.6.1.4.1.2011.6.145.2.43 |
| hwXponTrapParaOltPortState This object indicates the state of xPON port.
Options:
1. up(1) - Indicates that the port state is normal
2. down(2) - Indicates that the port state is fail | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.2.44 |
| hwXponOltAdminState This object indicates the admin state of xPON port.
Options:
1. on(1) - Indicates that the admin state is up
2. off(2) - Indicates that the admin state is down | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.2.45 |
| hwXponOltEnergySavingFlag This object indicates the energy saving flag of xPON port.
Options:
1. yes(1) - Indicates that the xPON port is in energy saving state
2. no(2) - Indicates that the xPON po… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.2.46 |
| hwGponOntPortTDMTxClock TDM port coding style
Options:
1. adapt(1) - Indicates that the tx-clock mode of the ONT TDM port is adapt
2. system(2) - Indicates that the tx-clock mode of the ONT TDM port is … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.2.47 |
| hwXponOltLosAffectOntNum This object indicates the number of affected ONT when the los alarm occurred.
-1 indicates the information is invalid. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.48 |
| hwXponOltLosDgiOntNum This object indicates the number of DGi ONT when the los alarm occurred.
-1 indicates the information is invalid. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.49 |
| hwXponCommonDeviceReceivedPackets The number of the ont remote ping received packets. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.5 |
| hwXponOntDosAttackProtocolType This object indicates the protocol such as PLOAM,OAM,OMCI ,which ONT uses to perform DOS attack. | scalar | OctetString | .1.3.6.1.4.1.2011.6.145.2.50 |
| hwXponOntDosAttackPeakTrafficValue This object indicates the peak number of messages per second when DOS attack occurred. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.51 |
| hwXponOltTrafficAlarmProfileAlarmDetectTimes This object indicates the alarm threshold of the congestion detection. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.52 |
| hwXponOltTrafficAlarmProfileWarningDetectTimes This object indicates the warning threshold of the congestion detection. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.53 |
| hwXponOltTrafficStatisticUpstreamCongestionTimes This object indicates the Upstream congestion period number. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.54 |
| hwXponOltTrafficStatisticDownstreamCongestionTimes This object indicates the Downstream congestion period number. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.55 |
| hwXponAlarmGponAndXgponComboPortChannelType This object indicates the channel type of GPON combo port.
options:
1. GPON -- GPON channel
2. XG-PON -- XG-PON channel | scalar | OctetString | .1.3.6.1.4.1.2011.6.145.2.56 |
| hwFrameIndexConflicted The index of a shelf in the device. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.145.2.57 |
| hwSlotIndexConflicted A slot index is used to identify the location of a board in a shelf. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.145.2.58 |
| hwPortIndexConflicted Port index, indicating the physical number of the port on a board. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.145.2.59 |
| hwXponCommonDeviceLostPackets The number of the ont remote ping lost packets. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.6 |
| hwXponOltTrafficMaxObservedTraffic This object indicates the maximum observed traffic in test interval(Mbps) of the congestion detection. | scalar | mbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.61 |
| hwXponOntWifiStateChageEventSsidIndex This object indicates the SSID index corresponding to an ONT Wi-Fi status change event. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.62 |
| hwXponOntWifiStateAssociatedStaNumTrend This object indicates the change trend of the current number of STAs connected to the ONT through Wi-Fi.
Options:
1. increased(1) - indicates that the current number of STAs co… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.2.63 |
| hwXponOntWifiStateCurrentAssociatedStaNumber This object indicates the current number of STAs connected to the ONT through Wi-Fi. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.64 |
| hwXponOntWifiStateChannelListChangeType This object indicates an SSID channel change type of the ONT Wi-Fi..
Options:
1. normalChange(1) - indicates manual or automatic SSID channel switching..
2. forceChange(2) -… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.2.65 |
| hwXponOntWifiStateCurrentChannelList This object indicates all the current channels after the SSID channel is switched for the ONT Wi-Fi. The number of channels is variable, and a maximum of 8 channels are displayed,… | scalar | OctetString | .1.3.6.1.4.1.2011.6.145.2.66 |
| hwXponOntWifiStateAssociatedStaWeakenedType This object indicates an STA weakening event of the ONT Wi-Fi.
Options:
1. lowRssi(1) - indicates the lower RSSI threshold for an STA.
2. lowAccessedRate(2) - indicates … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.2.67 |
| hwXponOntWifiStateAssociatedStaWeakenedMacAddress This object indicates the MAC address of a detected STA. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2011.6.145.2.68 |
| hwXponPortAutoPingTestResultCode The object indicates the result of port auto ping test .
options:
1.success(0) - Indicates the port auto ping test complete.
2.fail(1) - Indicates the port auto pin… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.2.69 |
| hwXponCommonDeviceLostRatio The ratio of the ont remote ping lost packets(percent). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.7 |
| hwXponOntAutoPingTestResultCode The object indicates the result of ont auto ping test .
options:
1.success(0) - Indicates the ont auto ping test complete.
2.fail(1) - Indicates the ont auto ping t… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.2.70 |
| hwPortCurrFlexMode This object indicates the flex mode of COMBO-PON port.
Options:
1. unusable(1) -Indicates that the flex mode is unusable.
2. gpon(2) -Indicates that the f… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.2.71 |
| hwPortNextFlexMode This object indicates the flex mode of COMBO-PON port.
Options:
1. unusable(1) -Indicates that the flex mode is unusable.
2. gpon(2) -Indicates that the f… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.2.72 |
| hwXponDIIndex This object indicates the ONT DI port ID, range: 0~255. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.73 |
| hwXponDIState This object indicates the state of the ONT DI port.
Options:
1. lower(0) - Indicates that the voltage state is lower.
2. higher(1) - Indicates that the voltage state is high… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.2.74 |
| hwXponCommonDeviceMinDelay The minimum delay of the ont remote ping(milli-seconds). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.8 |
| hwXponCommonDeviceMaxDelay The maximum delay of the ont remote ping(milli-seconds). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.2.9 |