hwGponOntPortVlanCfgTrap
HUAWEI-XPON-TRAP-MIB ·
.1.3.6.1.4.1.2011.5.100.1.1.31.1.0.8
Object
notification
This trap is sent when the port vlan configuration of the Gpon ONT changes.
Context
- MIB
- HUAWEI-XPON-TRAP-MIB
- OID
.1.3.6.1.4.1.2011.5.100.1.1.31.1.0.8- Type
- notification
- Status
- current
- Parent
- hwGponCommonTrapsPrefix
- Siblings
- 11
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwGponDeviceOntRunStateChangeTrap This trap is sent when the run state of the GPON ONT changes. | notification | - | .1.3.6.1.4.1.2011.5.100.1.1.31.1.0.1 |
| hwGponGEMPortCfgChangeTrap This trap is sent when the Gpon GEM port configuration changes. | notification | - | .1.3.6.1.4.1.2011.5.100.1.1.31.1.0.10 |
| hwGponTcontProfileOperateTrap This trap is sent when the Gpon Tcont profile changes. | notification | - | .1.3.6.1.4.1.2011.5.100.1.1.31.1.0.11 |
| hwGponDistModeOntInfoTrap This trap is sent when the Gpon ONT configuration changes under distributed mode. | notification | - | .1.3.6.1.4.1.2011.5.100.1.1.31.1.0.12 |
| hwGponDeviceOntAutoFindTrap This trap is sent when the Gpon ont is auto found. | notification | - | .1.3.6.1.4.1.2011.5.100.1.1.31.1.0.2 |
| hwGponDeviceOntVersionTrap This trap is sent when the Gpon ONT is online. | notification | - | .1.3.6.1.4.1.2011.5.100.1.1.31.1.0.3 |
| hwGponDeviceOntLoadTrap This trap is sent when the Gpon ONT is loaded. | notification | - | .1.3.6.1.4.1.2011.5.100.1.1.31.1.0.4 |
| hwGponDeviceOntDiscoveryStateTrap This trap is sent when the discovery state of the Gpon ONT is changed. | notification | - | .1.3.6.1.4.1.2011.5.100.1.1.31.1.0.5 |
| hwGponGEMMappingCfgChangeTrap This trap is sent when the gem port mapping configuration changes. | notification | - | .1.3.6.1.4.1.2011.5.100.1.1.31.1.0.6 |
| hwGponONTGEMPortCfgChangeTrap This trap is sent when the gem port configuration changes. | notification | - | .1.3.6.1.4.1.2011.5.100.1.1.31.1.0.7 |
| hwGponDevProfileCfgTrap This trap is sent when the device profile configuration of the GPON changes. | notification | - | .1.3.6.1.4.1.2011.5.100.1.1.31.1.0.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| HUAWEI-DEVICE-MIBhwConfigChangeIP The serial IP of configuration changes.
If the configuration changes is trigger by the command line users, the IP address is 0.0.0.0.
If it is triggered by the SNMP user, the IP a… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.3.8.1.5 |
| hwGponTrapOperType Operation type.
Options:
1. add(1) - Operation type is adding
2. modify(2) - Operation type is modifing
3. delete(3) - Operation type is deleting | scalar | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.30.8 |
| IF-MIBifIndex A unique value, greater than zero, for each interface. It
is recommended that values are assigned contiguously
starting from 1. The value for each interface sub-layer
must remai… | column | InterfaceIndex | .1.3.6.1.2.1.2.2.1.1 |
| HUAWEI-GPON-MIBhwGponDeviceOntObjectIndex ONT ID. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.1.5.1.1 |
| HUAWEI-GPON-MIBhwGponOntPortVlanCfgOntPhyType Port type of the ONT.
Options:
1. vdsl(37) -Port type of the ONT is vdsl
2. wifi(40) -Port type of the ONT is wifi
3. moca(46) -Port type of the ONT is moca
4. eth(47) -P… | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.60.1.1 |
| HUAWEI-GPON-MIBhwGponOntPortVlanCfgOntPhyIndex Port index of the ONT. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.1.60.1.2 |
| HUAWEI-GPON-MIBhwGponOntPortVlanCfgCVlan The customer VLAN which is used as the index of the table.
If configure standard vlan of the ont port, you can set S-VLAN same as C-VLAN,
or don't set leaves hwGponOntPortVlanCfgS… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.1.60.1.3 |
| HUAWEI-GPON-MIBhwGponOntPortVlanCfgSVlan The Ont port service vlan. It is standard vlan of the ont port when the S-VLAN is same as the C-VLAN.
Range: 0-4095 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.1.60.1.4 |
| HUAWEI-GPON-MIBhwGponOntPortVlanCfgSPri The service priority after the customer vlan translation or qinq.
set Range: 0-7
-1 indicates has not set the S-VLAN priority. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.1.60.1.5 |
| HUAWEI-GPON-MIBhwGponOntPortVlanCfgCPri The customer priority after the customer vlan translation or qinq.
When the priority may not be specified, should input -1.
Range: 0-7 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.1.60.1.8 |
| HUAWEI-GPON-MIBhwGponOntPortVlanCfgType The VLAN configuraton type of Eth port: 2-translation or 3-qinq.
Options:
1. translation(2) -The VLAN configuraton type of Eth port is translation
2. qinq(3) -The VLAN conf… | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.60.1.7 |
| HUAWEI-GPON-MIBhwGponOntPortVlanCfgEtherType The customer service encapsulation type: IPv4-IPoE(1-default) or PPPoE(2) or IPv6-IPoE(4).
Options:
1. ipv4-ipoe(1) -The customer service encapsulation type is ipv4 ipoe
2. pppoe… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.1.60.1.9 |