hwGponOntLoadCrcSupport
HUAWEI-XPON-TRAP-MIB ·
.1.3.6.1.4.1.2011.5.100.1.1.30.11
Object
scalar
Enumeration
Support state of ONT load CRC. Options: 1. noSupport(0) - Doesn't support state of ONT load CRC 2. support(1) - Support state of ONT load CRC 3. unconcern(255) - Unconcern state of ONT load CRC
Context
- MIB
- HUAWEI-XPON-TRAP-MIB
- OID
.1.3.6.1.4.1.2011.5.100.1.1.30.11- Type
- scalar
- Access
- notifyonly
- Status
- current
- Parent
- hwGponTrapsVbOids
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | noSupport |
1 | support |
255 | unconcern |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwGponOntTDMPortAlarmType Alarm type. The values are as follows:
Transmit failure (TF),
Loss of frame (LOF),
Out of frame (OOF),
Remote alarm indication (RAI),
2.048 Mbit/s alarm indication signal (AIS). | scalar | OctetString | .1.3.6.1.4.1.2011.5.100.1.1.30.1 |
| hwGponOntLoadResult ONT load result.
Options:
1. success(0) - ONT load result is success
2. fail(1) - ONT load result is fail
3. load20Percent(2) - ONT load result is loading 20 Percent | scalar | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.30.10 |
| hwGponOntLoadCrcValue ONT load CRC value. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.30.12 |
| hwGponDeviceOntObjectCRCSupport Support state of ONT CRC.
Options:
1. noSupport(0) - Doesn't support state of ONT CRC
2. support(1) - Support state of ONT CRC | scalar | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.30.13 |
| hwGponDeviceOntObjectCRCCode ONT CRC vlue.
The value (0) indicates that the query fails or ONT does not support it. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.30.14 |
| hwGponDeviceOntDualUpstreamSupport Indicate if ont support typeC.
Options:
1. support(1) - Support typeC
2. notsupport(2) - Doesn't support typeC
3. unknown(255) - Doesn't known if ont support typeC | scalar | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.30.15 |
| hwGponDeviceOntIsOntUpfromReset This object indicates whether the GPON ONT is online after reset.
Options:
1. yes(1) - The ONT is reseted.
2. no(2) - The ONT is not reseted. | scalar | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.30.16 |
| hwGponOntMask ONT MASK. | scalar | OctetString | .1.3.6.1.4.1.2011.5.100.1.1.30.2 |
| hwGponOntOpticalMoudleAlarmType Alarm type.
Options:
1. rxPower(1) - Alarm type is rxPower
2. txPower(2) - Alarm type is txPower
3. voltage(3) - Alarm type is voltage
4. temperature(4) - Alarm type i… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.30.3 |
| hwGponOntOpticalMoudleAlarmUpperValue Upper threshold(Value:-1024.00~1024.00). | scalar | OctetString | .1.3.6.1.4.1.2011.5.100.1.1.30.4 |
| hwGponOntOpticalMoudleAlarmLowerValue Lower threshold(Value:-1024.00~1024.00). | scalar | OctetString | .1.3.6.1.4.1.2011.5.100.1.1.30.5 |
| hwGponOntOpticalMoudleAlarmCurrentValue Current value(Value:-1024.00~1024.00). | scalar | OctetString | .1.3.6.1.4.1.2011.5.100.1.1.30.6 |
| hwGponTrapSerialNo Serial number. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.30.7 |
| hwGponTrapOperType Operation type.
Options:
1. add(1) - Operation type is adding
2. modify(2) - Operation type is modifing
3. delete(3) - Operation type is deleting | scalar | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.30.8 |
| hwGponOntLoadOperType ONT load operation type.
Options:
1. loadProgress(1) - ONT load operation type is loading Progress
2. configureApply(2) - ONT load operation type is configuring Apply | scalar | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.30.9 |