hwXponOntEthernetPortOpticalBrNominal
HUAWEI-XPON-COMMON-MIB ·
.1.3.6.1.4.1.2011.6.145.1.1.5.13.1.19
Object
Indicate Nominal bit rate. Unit: 100 MBits/sec Invalid(-1) - Indicates that the query fails or no information is detected
Context
- MIB
- HUAWEI-XPON-COMMON-MIB
- OID
.1.3.6.1.4.1.2011.6.145.1.1.5.13.1.19- Type
- column
- Access
- readonly
- Status
- current
- Units
- 100 MBits/sec
- Parent
- hwXponOntEthernetPortOpticalStaticInfoEntry
- Table
- hwXponOntEthernetPortOpticalStaticInfoTable
- Siblings
- 22
Syntax
100 MBits/sec SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwXponOntEthernetPortOpticalIdentifier Indicate the identifier of optical module.
Options:
1. unknown(1) -unknown the identifier of optical module
2. gbic(2) -the identifier of opti… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.5.13.1.1 |
| hwXponOntEthernetPortOptical10GEComplianceCodes Indicate the 10G ethernet transceiver type.
Options:
1. en10GBASELRM(1) -Ethernet transceiver type is 10GBASE-LRM
2. en10GBASELR(2) -Ethernet transceive… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.5.13.1.10 |
| hwXponOntEthernetPortOpticalGEComplianceCodes Indicate the 1G ethernet transceiver type.
Options:
1. en1000BASET(1) -Ethernet transceiver type is 1000BASE-T
2. en1000BASECX(2) -Ethernet transcei… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.5.13.1.11 |
| hwXponOntEthernetPortOpticalSpeed Indicate the fibre Channel speed.
Options:
1. speed400MBytesPerSec(1) -fibre channel speed is 400 MBytes/s
2. speed200MBytesPerSec(2) -fibre channel speed is 200 MBy… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.5.13.1.12 |
| hwXponOntEthernetPortOpticalLength9Micronkm Indicate the link length that is supported by the transceiver while operating in compliance
with the applicable standards using 9 micron Single-mode Fiber.
0-255: The maximum va… | column | km SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.1.1.5.13.1.13 |
| hwXponOntEthernetPortOpticalLength9Micron Indicate the link length that is supported by the transceiver while operating in
compliance with the applicable standards using 9 micron Single-mode Fiber.
0~255:The maximum value… | column | 1m SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.1.1.5.13.1.14 |
| hwXponOntEthernetPortOpticalLength50Micron Indicate link length that is supported by the transceiver while operating in
compliance with applicable standards using 50 micron multi-mode OM2 [500MHz*km]
fiber.
0~255:The maxi… | column | 10m SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.1.1.5.13.1.15 |
| hwXponOntEthernetPortOpticalLength62Micron5 Indicate link length that is supported by the transceiver while operating in
compliance with applicable standards using 62.5 micron multi-mode OM1 [200 MHz*km]
fiber.
0~255: The … | column | 10m SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.1.1.5.13.1.16 |
| hwXponOntEthernetPortOpticalLengthCopper Indicate Link length supported for copper.
Unit: 1m
Invalid(-1) - Indicates that the query fails or no information is detected | column | 1m SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.1.1.5.13.1.17 |
| hwXponOntEthernetPortOpticalWaveLength The laser wavelength.
Unit: 1nm
Invalid(-1) - Indicates that the query fails or no information is detected | column | 1nm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.1.1.5.13.1.18 |
| hwXponOntEthernetPortOpticalExtID Indicate the extended type of optical module.
Options:
1. notSpecifiedOrNotCompliant(1) -the extended type of optical module is notSpecifiedOrNotCompliant
2. moddef1(2) … | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.5.13.1.2 |
| hwXponOntEthernetPortOpticalBrMax The upper bit rate margin.
Invalid(-1) - Indicates that the query fails or no information is detected | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.1.1.5.13.1.20 |
| hwXponOntEthernetPortOpticalBrMin The lower bit rate margin.
Invalid(-1) - Indicates that the query fails or no information is detected | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.1.1.5.13.1.21 |
| hwXponOntEthernetPortOpticalCcBase The check code for the base ID fields.
Invalid(-1) - Indicates that the query fails or no information is detected | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.1.1.5.13.1.22 |
| hwXponOntEthernetPortOpticalCcExt The check code for the extended ID fields.
Invalid(-1) - Indicates that the query fails or no information is detected | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.1.1.5.13.1.23 |
| hwXponOntEthernetPortOpticalConnector Indicate the type of optical module connector.
Options:
1. unknown(1) -unknown the type of optical module connector.
2. sc(2) -the type of optical mod… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.5.13.1.3 |
| hwXponOntEthernetPortOpticalVendorName Indicate the vendor name of a optical module. | column | OctetString | .1.3.6.1.4.1.2011.6.145.1.1.5.13.1.4 |
| hwXponOntEthernetPortOpticalVendorRev Indicate the revision level for part number provided by vendor. | column | OctetString | .1.3.6.1.4.1.2011.6.145.1.1.5.13.1.5 |
| hwXponOntEthernetPortOpticalVendorPN Indicate the part number of a optical module provided by vendor. | column | OctetString | .1.3.6.1.4.1.2011.6.145.1.1.5.13.1.6 |
| hwXponOntEthernetPortOpticalVendorSN The serial number of a optical module provided by vendor. | column | OctetString | .1.3.6.1.4.1.2011.6.145.1.1.5.13.1.7 |
| hwXponOntEthernetPortOpticalDateCode The date code of a optical module. | column | OctetString | .1.3.6.1.4.1.2011.6.145.1.1.5.13.1.8 |
| hwXponOntEthernetPortOpticalSFF8472Compliance Indicate the SFF-8472 standard.
Options:
1. undefined(1) -not included or undefined.
2. includesSFF8472V93(2) -includes functionality described in SFF-8472 Rev … | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.5.13.1.9 |