hwXponOntBatchInfoTable
HUAWEI-XPON-COMMON-MIB ·
.1.3.6.1.4.1.2011.6.145.1.1.1.7
Object
table
This table is used to query the ont run state, config state, admin state, load state, equipment ID, software version, system status, CRC value and offline reason. The length of query result can not exceed 7000 BYTEs. This table can not support the operation of get next. The index of this table is hwXponOntBatchQueryIndex.
Context
- MIB
- HUAWEI-XPON-COMMON-MIB
- OID
.1.3.6.1.4.1.2011.6.145.1.1.1.7- Type
- table
- Status
- current
- Parent
- hwXponCommonControlObjects
- Siblings
- 49
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwGponDeviceOntVoipCfgFileInfoTable The hwGponDeviceOntVoipCfgFileInfoTable is used to query the version information and validation status of the ONT voice configuration file.
The indexes of this table are ifIndex a… | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.1 |
| hwGponOntPortMulticastVlanTranslationTable The hwGponOntPortMulticastVlanTranslationTable is used to config the multicast vlan translation of GPON ONT port.
The indexes of this table are ifindex, hwGponDeviceOntObjectIndex… | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.10 |
| hwXponOntVoipConfigTable The hwXponOntVoipConfigTable is used to config the FTP Server and config the configuration files name.
The indexes of this table are ifindex and hwXponOntIndex. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.12 |
| hwXponOntConfigTable The hwXponOntConfigTable is used to config the ONT.
The indexes of this table are ifIndex and hwXponOntIndex. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.13 |
| hwXponOntWanInfoTable The hwXponOntWanInfoTable is used to query the information about WAN ports.
The indexes of this table are ifIndex and hwXponOntIndex. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.14 |
| hwGponPortControlTable The hwGponPortControlTable is used to config the information about ports.
The index of this table is ifIndex. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.15 |
| hwXponDeviceOntActiveAlarmTable The hwXponDeviceOntActiveAlarmTable is used to query the active alarm about ONT.
The indexes of this table are ifIndex and hwXponOntIndex. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.16 |
| hwXponOntIpConfigTable The ONT IP config table. This table is used to configure and query
the IP configuration mode and IP address of an ONT.
The indexes of this table are ifIndex, hwXponOntIndex and hw… | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.17 |
| hwXponOntCapabilityInfoTable The ont info table. This table is used to query capability of the ont.
The indexes of this table are ifIndex and hwXponOntIndex. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.18 |
| hwXponOntPowerSheddingStatusQueryTable The hwXponOntPowerSheddingStatusQueryTable is used to query the power shedding status of the ONT.
The indexes of this table are ifIndex and hwXponOntIndex. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.19 |
| hwGponDeviceOntPotsPortStateTable Query the state of ONT POTS port table.The table is used to query the
state of ONT POTS port.
The indexes of this table are ifIndex, hwGponDeviceOntObjIndex and hwGponDeviceOntPot… | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.2 |
| hwGponDeviceOntCapabilityInfoTable The ont capability table. This table is used to query capability of the gpon ont.
The indexes of this table are ifIndex and hwGponDeviceOntObjIndex. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.20 |
| hwXponDeviceOtdrTestTable This table is used for the OTDR testing.
The index of this table is ifIndex. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.21 |
| hwXponOpticsDdmInfoExTable This table supports the query of the information about the optical transceiver.
The index of this table is ifIndex. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.22 |
| hwXponOpticsParameterRangeTable The xpon optics parameter range table. This table is used to query range of the optics parameter.
The indexes of this table are hwXponOpticalModuleType, hwXponOpticalModuleSubType… | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.23 |
| hwGponInteroperModeConfigTable This table is used to configure the interoperability mode of the ONT.
The indexes of this table are hwGponInteroperModeOntVenderIDInfoIndex, hwGponInteroperModeOntEquipmentIDInfoI… | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.24 |
| hwXponOltOpticsModuleExtInfoTable This table is used to query the information about the optical transceiver.
The index of this table is ifIndex. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.25 |
| hwGponOntPortServiceCfgTable This table is used to configure the service parameter of the ONT port.
The indexes of this table are ifIndex, hwXponOntIndex, hwGponOntifType and hwGponOntifPort. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.26 |
| hwXponDeviceOntNoAuthConfigTable The hwXponDeviceOntNoAuthConfigTable is used to configure the type of ONT to be no authentication.
The indexes of this table are hwXponDeviceOntAccessType and hwXponDeviceOntModel. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.27 |
| hwGponPortInfoTable GPON port Info table. This table is used to query the GPON/XG-PON port information.
The index of this table is ifIndex. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.28 |
| hwEponInteroperModeConfigTable This table is used to configure the interoperability mode of the EPON ONT.
The indexes of this table are hwEponInteroperModeOntVendorIDInfoIndex, hwEponInteroperModeOntModelInfoIn… | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.29 |
| hwXponOntFileTransmitionTable This is ONT file transmission table. This table is used to
transmit the config or diagnose files between BMS and ONU.
The indexes of this table are ifIndex, hwXponOntIndex and
hwX… | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.3 |
| hwXponUnconfiguredRogueOntTable This table is used to query the information about rogue ONTs that is not added.
The index of this table is a combination of ifIndex and hwXponUnconfiguredRogueOntIndex. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.30 |
| hwXponOntPortConfigTable This table is used to configure the mac learning switch of teh ont port.
The indexes of this table are ifIndex, hwXponOntIndex, hwXponOntPhyType and hwXponOntPhyIndex. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.31 |
| hwXponOntPortStaticMacTable This table is used to configure the static mac address and vlan of the ONT port.
The indexes of this table are ifIndex, hwXponOntIndex, hwXponOntPhyType, hwXponOntPhyIndex and hwX… | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.32 |
| hwXponOntLoadInfoTable This table is used to load the ONT file.
The indexes of this table are ifIndex, hwXponOntNewIndex. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.33 |
| hwXponOpticalDdmProfileReferenceTable This table supports the query of the reference thresholds about the optical transceiver.
The indexes of this table are hwXponOpticalUseType, hwXponOpticalGradeType, hwXponOpticalT… | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.34 |
| hwXponOntPortVlanExtConfigTable This table is used to configure the vlan config mode and downstream operation mode of ont port.
The indexes of this table are ifIndex, hwXponOntIndex, hwXponOntPortVlanExtConfigPh… | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.35 |
| hwXponOntPortVlanDiscardTable This table is used to configure the vlan discard mode of ont port.
The indexes of this table are ifIndex, hwXponOntIndex, hwXponOntPortVlanDiscardPhyType and
hwXponOntPortVlanDisc… | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.36 |
| hwGponBoardWorkModeTable This table is used to configure the board work mode of GPON board.
The indexes of this table are hwFrameIndex and hwSlotIndex. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.37 |
| hwXponPortVsResourceTable This table is used to config the resource about ports in virtual system.
The indexes of this table are ifIndex and hwXponPortVsId. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.38 |
| hwGponTwdmChannelGroupTable This table supports the TWDM PON channel group.
The index of this table is hwGponTwdmChannelGroupId. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.39 |
| hwXponOntInfoTable The ont info table. This table is used to query the ont information.
The indexes of this table are ifIndex and hwXponOntIndex. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.4 |
| hwGponTwdmChannelMemberTable This table supports the TWDM PON channel group member.
The indexes of this table are hwGponTwdmChannelGroupId, hwGponTwdmChannelMemberIndex. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.40 |
| hwXponPortChannelMaxRateInfoTable This table supports to get the port second-level peak rate.
The indexes of this table are ifIndex, hwXponPortChannelIndex, hwXponPortChannelRateDirection. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.41 |
| hwXponDeviceOntPotsPortStateTable This table is used to query the state of ONT POTS port.
The indexes of this table are ifIndex, hwXponOntIndex and hwXponDeviceOntPotsPortId. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.42 |
| hwGponPortConfigInfoTable The hwGponPortConfigInfoTable is used to query the information about ports.
The index of this table is ifIndex. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.43 |
| hwXponOntAutoPingTable The hwXponOntAutoPingTable is used to start ont auto ping test and query result.
The indexes of this table are ifIndex and hwXponOntIndex. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.44 |
| hwXponPortAutoPingTable The hwXponPortAutoPingTable is used to start auto ping test for all onts under port.
The indexes of this table are ifIndex. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.45 |
| hwXponDeviceGetOntInfoByAuthInfoTable This table is used to get ONT information by ONT authentication information.
If multiple ONTs match authentication information, only the first one is obtained.
The indexes of this… | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.46 |
| hwXponOntOpticalDdmInfoHistoryTable This table is the ont optical Ddm infomation history.
The indexes of this table are ifIndex hwXponOntIndex and hwXponOntOpticalDdmInfoRecordIndex. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.47 |
| hwXponPortOpticConfigTable This table is used to configure the optical module information state.
The index of this table is ifIndex. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.48 |
| hwXponPortOpticListTable This table is used to get optical module list.
The indexe of this table is hwXponPortOpticListType. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.49 |
| hwXponOntIpMaintainTable The ONT IP maintain table. This table is used to config the ONT.
The indexes of this table are ifIndex hwXponOntIndex and hwXponOntIpMaintainIndex. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.5 |
| hwGponBoardFlexLicenseTable Indicates the flex license info of the board.
The index of this table is hwFrameIndex and hwSlotIndex. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.50 |
| hwXponOntDIDOTable Indicates the DI/DO state of the ONT and control the switch of the ONT DI Trap Reporting.
The index of this table is ifIndex and hwXponOntIndex. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.51 |
| hwXponPortInfoTable XPON port Info table. This table is used to query the port information.
The index of this table is ifIndex. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.6 |
| hwXponOntPppoeSimuTestInfoTable This table is used for the PPPoE testing.
The index of this table is a combination of ifIndex and hwXponOntIndex. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.8 |
| hwXponOntControlTable The hwXponOntControlTable is used to config the ONT.
The indexes of this table are ifIndex and hwXponOntIndex. | table | - | .1.3.6.1.4.1.2011.6.145.1.1.1.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwXponOntBatchInfoEntry This table is used to query the ont run state, config state, admin state, load state,
equipment ID, software version, system status, CRC value and offline reason. The length of q… | row | - | .1.3.6.1.4.1.2011.6.145.1.1.1.7.1 |