hwGponPortMulticastEncryptMode
HUAWEI-XPON-COMMON-MIB ·
.1.3.6.1.4.1.2011.6.145.1.1.1.15.1.5
Object
column
r/w
Enumeration
This object is used to configure the Multicast GEM Port encypt mode. Options: 1. disable(1) - Indicates that the Multicast GEM Port encypt mode is disable 2. enable(2) - Indicates that the Multicast GEM Port encypt mode is enable 3. adapt(3) - Indicates that the Multicast GEM Port encypt mode is adapt 4. invalid(-1) - Indicates that the query fails or no information is detected Default:disable(1).
Context
- MIB
- HUAWEI-XPON-COMMON-MIB
- OID
.1.3.6.1.4.1.2011.6.145.1.1.1.15.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwGponPortControlEntry
- Table
- hwGponPortControlTable
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
Enumerated Values
-1 | invalid |
1 | disable |
2 | enable |
3 | adapt |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwGponPortControlDbaAssignMode This object is used to configure the DBA bandwidth assignment mode.
Options:
1. maxbandwidthusage(1) - max bandwidth usage mode
2. minloopdelay(2) - min loop delay mode
3. m… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.15.1.1 |
| hwGponPortControlWaveLengthID This object indicates the wavelength of TWDM-PON port.
Options:
1. waveLengthID0(0) - Indicates that the wavelength of TWDM-PON port is 1596.34nm.
2. waveLengthID1(1)… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.15.1.10 |
| hwGponPortControlComboMode This object indicates the combo mode of COMBO-PON port.
Options:
1. auto(1) - Indicates that the combo mode is auto.
2. wdm(2) - Indic… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.15.1.11 |
| hwGponPortControlFlexMode This object indicates the flex mode of COMBO-PON port.
Options:
1. gpon(2) -Indicates that the flex mode is Gpon.
2. xgpon(3) -Indicates that the flex m… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.15.1.12 |
| hwGponPortControlDbaLowlatency This object is used to configure the low latency switch.
Options:
1. enable(1) -Indicates that the lowlatency is enable
2. disable(0) -Indicates that the lowl… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.15.1.13 |
| hwGponPortControlLightTestTimeduration This object is used to configure the time duration of light test, 0s ~ 3600s, 0s means stopping the testing immidiately | column | s SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.1.1.1.15.1.14 |
| hwGponPortControlLightTestTestStatus This object is used to configure the laser test status.
Options:
1. enable(1) - laser tx is enable
2. disable(2) - laser tx is disable
3. invalid(-1)
Default:… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.15.1.15 |
| hwGponPortControlLightTestFinshStatus This object is used to configure the laser status after the test is completed.
Options:
1. enable(1) - laser tx is enable
2. disable(2) - laser tx is disable
3. origi… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.15.1.16 |
| hwGponPortControlPonIdSwitch This object is used to configure the PON-ID switch.
Options:
1. enable(1) - Indicates that the PON-ID switch is enabled
2. disable(2) - Indicates that the PON-ID switch… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.15.1.2 |
| hwGponPortControlPonIdInputMode This object is used to configure the input mode of PON-ID identifier.
Options:
1. text(1) - Indicates that the input mode of PON-ID identifier is text
2. hex(2) -… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.15.1.3 |
| hwGponPortControlPonIdIdentifier This object is used to configure the PON-ID identifier.
The GPON port supports a maximum of 7 characters to be input for configuring the PON-ID identifier.
The XG PON port support… | column | OctetString | .1.3.6.1.4.1.2011.6.145.1.1.1.15.1.4 |
| hwGponPortControlDbaSurplusAssign This object is used to configure the surplus bandwidth assignment swith.
Options:
1. enable(1) - Indicates that the surplus bandwidth assignment is enable
2. disable(2)… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.15.1.6 |
| hwGponPortControlBEAssignMode This object is used to configure the best effort assign mode.
Options:
1. rateProportion(1) - Indicates that the best effort assign mode is rate proportion
2. priorityWeight(2)… | column | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.1.15.1.7 |
| hwGponPortControlTrafficAlarmProfileName This object indicates the traffic alarm profile name.
This object is used to configure the traffic alarm profile.
An empty string is used to unbind the traffic alarm profile. | column | OctetString | .1.3.6.1.4.1.2011.6.145.1.1.1.15.1.8 |
| hwGponPortControlMaxGuaranteedBandwidth This object indicates the maximum guaranteed bandwidth, The value must be greater than or equal to 128 but cannot be larger than the maximum physical bandwidth of a PON port.
Uni… | column | kbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.1.1.1.15.1.9 |