hwGponDeviceOntLOOCiAlarmMonitorPeriod
HUAWEI-XPON-COMMON-MIB ·
.1.3.6.1.4.1.2011.6.145.1.1.3.30
Object
scalar
r/w
Integer32
This object indicates GPON LOOCi alarm monitoring period, in seconds. The default value is 900.
Context
- MIB
- HUAWEI-XPON-COMMON-MIB
- OID
.1.3.6.1.4.1.2011.6.145.1.1.3.30- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hwGponDeviceCommonGlobalObjects
- Siblings
- 29
Syntax
Integer32
Values & Constraints
Object Constraints
range: 60-900
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwGponDeviceChangePasswordIntervalTime The interval time of ONT's password renew, 0 means no update, 65535 means no
configration data.
Unit: minutes | scalar | minutes Unsigned32 | .1.3.6.1.4.1.2011.6.145.1.1.3.1 |
| hwGponOntPriorityQueueMappingPolicySwitch The switch value of GPON ONT priority queue mapping policy.
Options:
1. gemMap(1) - GPON ONT priority queue mapping policy is gemMap
2. cosMap(2) - GPON ONT priority queue mappi… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.3.10 |
| hwGponDeviceXgMulticastGemportId The GEM port ID for XG-PON multicast service, ranging from 65439 to 65534.
The default value is 65534. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.1.1.3.11 |
| hwGponOntWanConfigMode The mode of gpon ont wan config mode.
Options:
1. setAfterCreate(1) - The mode of gpon wan config mode is set-after-create
2. setByCreate(2) - The mode of gpon wan config … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.3.12 |
| hwGponDeviceAntiDosPloamSwitch The switch value of anti-dos PLOAM.
Options:
1. enable(1) - The switch value of anti-dos PLOAM is enable
2. disable(2) - The switch value of anti-dos PLOAM is disable
The default… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.3.13 |
| hwGponOntHomeGatewayConfigMethod The config method of home gateway.
Options:
1. xml(1) - The config method of home gateway is xml.
2. omci(2) - The config method of home gateway is omci. | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.3.14 |
| hwGponDeviceSnOutPutFormatPolicy The output format of SN.
Options:
1. default(1) - The output format of SN is default
2. vendorPrefix(2) - The output format of SN is vendor-prefix
The default value is de… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.3.15 |
| hwGponDeviceOmciBandwidthCompensateSwitch The switch value of omci bandwidth compensate.
Options:
1. enable(1) - The switch value of omci bandwidth compensate is enable
2. disable(2) - The switch value of omci bandwidt… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.3.16 |
| hwGponOntVlanTagOperMode The mode of gpon ont vlan tag operation mode.
Options:
1. modifyExternalTag(1) - The mode of gpon vlan tag operation mode is modify-external-tag
2. modifySingleTag(2) - The… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.3.17 |
| hwGponOntAniMVlanFilter Indicates the mode of multicast VLAN filtering on the GPON ONT ANI side.
Options:
1. default(0) -Indicates the default system behavior.
2. enable(1) -Creates th… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.3.18 |
| hwGponOntQueueMapQueue0ID Configures the rule of mapping the GPON ONT virtual queue to actual queue.
Note the leaves hwGponOntQueueMapQueue0ID to hwGponOntQueueMapQueue7ID must be configured concurrently.… | scalar | Integer32 | .1.3.6.1.4.1.2011.6.145.1.1.3.19 |
| hwGponDeviceTcontAutoCombineSwitch The switch value of T-CONT auto-combine.
Options:
1. enable(1) - The switch value of T-CONT auto-combine is enable
2. disable(2) - The switch value of T-CONT auto-combine is disa… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.3.2 |
| hwGponOntQueueMapQueue1ID Configures the rule of mapping the GPON ONT virtual queue to actual queue.
Note the leaves hwGponOntQueueMapQueue0ID to hwGponOntQueueMapQueue7ID must be configured concurrently.… | scalar | Integer32 | .1.3.6.1.4.1.2011.6.145.1.1.3.20 |
| hwGponOntQueueMapQueue2ID Configures the rule of mapping the GPON ONT virtual queue to actual queue.
Note the leaves hwGponOntQueueMapQueue0ID to hwGponOntQueueMapQueue7ID must be configured concurrently.… | scalar | Integer32 | .1.3.6.1.4.1.2011.6.145.1.1.3.21 |
| hwGponOntQueueMapQueue3ID Configures the rule of mapping the GPON ONT virtual queue to actual queue.
Note the leaves hwGponOntQueueMapQueue0ID to hwGponOntQueueMapQueue7ID must be configured concurrently.… | scalar | Integer32 | .1.3.6.1.4.1.2011.6.145.1.1.3.22 |
| hwGponOntQueueMapQueue4ID Configures the rule of mapping the GPON ONT virtual queue to actual queue.
Note the leaves hwGponOntQueueMapQueue0ID to hwGponOntQueueMapQueue7ID must be configured concurrently.… | scalar | Integer32 | .1.3.6.1.4.1.2011.6.145.1.1.3.23 |
| hwGponOntQueueMapQueue5ID Configures the rule of mapping the GPON ONT virtual queue to actual queue.
Note the leaves hwGponOntQueueMapQueue0ID to hwGponOntQueueMapQueue7ID must be configured concurrently.… | scalar | Integer32 | .1.3.6.1.4.1.2011.6.145.1.1.3.24 |
| hwGponOntQueueMapQueue6ID Configures the rule of mapping the GPON ONT virtual queue to actual queue.
Note the leaves hwGponOntQueueMapQueue0ID to hwGponOntQueueMapQueue7ID must be configured concurrently.… | scalar | Integer32 | .1.3.6.1.4.1.2011.6.145.1.1.3.25 |
| hwGponOntQueueMapQueue7ID Configures the rule of mapping the GPON ONT virtual queue to actual queue.
Note the leaves hwGponOntQueueMapQueue0ID to hwGponOntQueueMapQueue7ID must be configured concurrently.… | scalar | Integer32 | .1.3.6.1.4.1.2011.6.145.1.1.3.26 |
| hwGponDeviceGemPortEncryptMode This object indicates the automatic allocation gemport encrypt mode.
Options:
1. on(1) - Indicates that the automatic allocation gemport encrypt mode is on
2. off(2) - In… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.3.27 |
| hwGponDeviceOntLOOCiAlarmThreshold This object indicates the GPON LOOCi alarm generation threshold, in times.
The restoration threshold must be lower than the generation threshold.
The default value is 100. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.145.1.1.3.28 |
| hwGponDeviceOntLOOCiAlarmRestoreThreshold This object indicates the GPON LOOCi alarm restoration threshold, in times.
The restoration threshold must be lower than the generation threshold.
The default value is 0. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.145.1.1.3.29 |
| hwGponOntInteroperabilityMode The switch mode of gpon ont interoperability.
Options:
1. ituT(1) - The switch mode of gpon ont interoperability is ituT
2. ctc(2) - The switch mode of gpon ont i… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.3.3 |
| hwGponDeviceOntDefaultLineProfName This object indicates the name of the default line profile that is bound to the ONT. | scalar | OctetString | .1.3.6.1.4.1.2011.6.145.1.1.3.4 |
| hwGponDeviceOntDefaultSrvProfName This object indicates the name of the default service profile that is bound to the ONT. | scalar | OctetString | .1.3.6.1.4.1.2011.6.145.1.1.3.5 |
| hwGponOntMutlicastAuthMode The mode of gpon ont multicast authentication.
Options:
1. ontControl(1) - The mode of gpon multicast authentication is ont-control
2. oltControl(2) - The mode of gpon multicast… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.3.6 |
| hwGponOnuTcontPriorityQueuePriorityReverse The priority reverse switch of gpon ont priority queue.
Options:
1. enable(1) - The priority reverse switch is enable
2. disable(2) - The priority reverse switch is disable | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.3.7 |
| hwGponOntInteroperModeActiveMode The active mode of gpon ONT interoperability mode.
Options:
1. immediate(1) - Indicates that the ONT takes effect immediately
2. nextStartup(2) - Indicates that the ONT takes… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.3.8 |
| hwGponDeviceTcontAutoCreateSwitch The switch value of T-CONT auto-create.
Options:
1. enable(1) - The switch value of T-CONT auto-create is enable
2. disable(2) - The switch value of T-CONT auto-create is disable… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.3.9 |