hwRadioLocationEnable
HUAWEI-WLAN-RADIO-MIB ·
.1.3.6.1.4.1.2011.6.139.3.2.1.37
Object
column
r/w
Integer32
0: disable 1: enable.
Context
- MIB
- HUAWEI-WLAN-RADIO-MIB
- OID
.1.3.6.1.4.1.2011.6.139.3.2.1.37- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwRadioManageEntry
- Table
- hwRadioManageTable
- Siblings
- 43
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-1
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwRadioID A exclusive identifier of a radio.
The range of the radio id is from 0 to 3, and the default radio id is 0.
Notes the setting of radio id must insure the radio of a AP exist. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.3.2.1.1 |
| hwRadioWorkingPowerLevel An object uses to display the working power level which is currently used by this radio.
Notes the radio working power level just can be display,but can't be configured. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.3.2.1.10 |
| hwRadioWorkingPower An object is used to describing the working porwer (in 0.01dbm) that the radio is working on actually.
You just can read it when the radio is working. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.3.2.1.11 |
| hwRadioMngChannelBandwidth An object is used to describing the bandwidth that the AP support .You can config the AP bandwidth by the hwRadioMngChannelBandwidth,
but the AP may be not working on value of t… | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.2.1.12 |
| hwRadioWorkingChannelBandwidth An object is used to describing the bandwidth that the AP working on actually.
the value may be unknown(-1) HT20(1) HT40-plus(2) or HT40-minus(3) . | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.2.1.13 |
| hwRadio80211nMCSValue An object is used to describing the 802.11n AP's MCS Value. The MCS means modulation and coding scheme.
Tha value of MCS will changed for value of spatial streams has been changed… | column | Integer32 | .1.3.6.1.4.1.2011.6.139.3.2.1.14 |
| hwRadioWidsWorkMode Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.2.1.15 |
| hwRadioMngBinded Object selects a mechanism for bind/unbind the radio-profile | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.2.1.16 |
| hwRadioDeviceDetectEnable Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.2.1.17 |
| hwRadioMaxTxPwrLvl Description. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.139.3.2.1.18 |
| hwRadioPwrAttRange Description. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.139.3.2.1.19 |
| hwRadioMngBaseBssID You can get an effective baseBssID ,only when wlan 1 is created. Or you will get a noneffective value.
BSSID identifies a minimum service set,When administrator binds a ESS to a r… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2011.6.139.3.2.1.2 |
| hwRadioPwrAttValue Description. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.139.3.2.1.20 |
| hwRadioAntennaGain Description. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.139.3.2.1.21 |
| hwRadioBridgeWhitelistEnable Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.2.1.22 |
| hwRadioBridgeWhitelistName Description. | column | OctetString | .1.3.6.1.4.1.2011.6.139.3.2.1.23 |
| hwRadioBridgeStpSwitch Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.2.1.24 |
| hwRadioBridgeSwitch Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.2.1.25 |
| hwRadioBridgeMode Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.2.1.26 |
| hwRadioUndoBridgeWhitelist Description. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.139.3.2.1.27 |
| hwRadioUserTrafficScheduler obsolete Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.2.1.28 |
| hwRadioCountermeasuresMode Description. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.3.2.1.29 |
| hwRadioMngRadioProfileName The radio profile which is binded to this radio.
The request of the radio parofile name string in detail as follows:
- The length of the radio profile name at lea… | column | OctetString | .1.3.6.1.4.1.2011.6.139.3.2.1.3 |
| hwRadioFrequency Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.2.1.30 |
| hwRadioCountermeasuresSwitch Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.2.1.31 |
| hwRadioSpectrumAnalysisEnable Description. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.139.3.2.1.32 |
| hwRadioWidsAttackDetEnable Description. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.139.3.2.1.33 |
| hwRadioMeshWhitelistName Description. | column | OctetString | .1.3.6.1.4.1.2011.6.139.3.2.1.34 |
| hwRadioUndoMeshWhitelist Description. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.139.3.2.1.35 |
| hwRadioMeshRole Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.2.1.36 |
| hwRadioLocationScanChannelEnable 0: disable
1: enable. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.3.2.1.38 |
| hwRadio80211nMulticastMCSValue Description. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.3.2.1.39 |
| hwRadioMngState A switch flag, which set the radio status as enable or disable, tells whether the wireless signal transmission is supported by the radio.
Enable means the radio supports transmiss… | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.2.1.4 |
| hwRadioSpectrogramServerReportEnable 0: disable
1: enable | column | Integer32 | .1.3.6.1.4.1.2011.6.139.3.2.1.40 |
| hwRadioRadioMulticastRateValue Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.2.1.41 |
| hwRadio11acSpatialStream Description. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.3.2.1.42 |
| hwRadio11acMCSValue Description. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.3.2.1.43 |
| hwRadioActiveSwitch Mesh handover feature: Fat AP receive dormancy or active signal through snmp.
When the signal is active, radio of fat ap is enable and send RARP packet;
When the signal is dorman… | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.2.1.44 |
| hwRadioMngChannel An object uses to set the channel of a radio.
The value of the channel is decided by the channel mode.Such as ,the enum value of channel is 1, 6, 11 on the condition of the 80211… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.3.2.1.5 |
| hwRadioMngPowerLevel An object uses to set the power level of a radio. The range of the power level of a radio is from 0 to 3.
the power of power level 0 is the maximum power, the power of power leve… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.3.2.1.6 |
| hwRadioMngPower An object uses to display the power (in 0.01dbm) which is currently used by this radio. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.139.3.2.1.7 |
| hwRadioAvailableSntennaNumber An object set the available antenna number,which can close some antennas to save electric power.
All means it uses all the available antenna, Num1 means it uses one of the availab… | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.2.1.8 |
| hwRadioWorkingChannel An object uses to display the working channel which is currently used by this radio.
Notes the radio working channel just can be display,but can't be configured. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.3.2.1.9 |