hwRadioDTIMInterval
HUAWEI-WLAN-RADIO-MIB ·
.1.3.6.1.4.1.2011.6.139.3.1.1.15
Object
An interval uses to set the parameter of DTIM periods of a radio profile. The DTIM interval means between two DTIM beacon how much
Beacons have been sended.
DTIM is the abbreviation of Delivery Traffic Indication Map. AP will conserve the BTV and broadcast frames for a STA provisionally,
when the STA is in the resting mode. If DTIM is included in a beacon from a ap to a sta, the ap will send the BTV and broadcast
frames which have been conserved provisionally to the STA immediately.
The units of the DTIM interval is beacon, the range of the DTIM interval is from 1 beacon to 255 beacons,
and the default DTIM interval is 3 beacons.
Context
- MIB
- HUAWEI-WLAN-RADIO-MIB
- OID
.1.3.6.1.4.1.2011.6.139.3.1.1.15- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwRadioProfileEntry
- Table
- hwRadioProfileTable
- Siblings
- 72
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwRadioProfileName A human readable string representing the name of the radio profile.
This is the (radio profile) model dependent radio profile ID.
The request of the … | column | OctetString | .1.3.6.1.4.1.2011.6.139.3.1.1.1 |
| hwRadioRTSThreshold A threshold standard, which judges whether need to send a RTS frame, gives an utmost length to the frame packet from the MAC layer.
Once the length of a frame from MAC layer prepo… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.3.1.1.10 |
| hwRadioFragmentThreshold A threshold standard, which judges whether need to split a frame to several frames, gives an utmost length to the frame packet from the MAC layer.
Once the length of a frame from … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.3.1.1.11 |
| hwRadioShortFrameRetryTimes A threshold standard, which judges whether a frame need to retry to send or discard, gives an utmost times to retry to
send a short frame packet from the MAC layer. A short frame… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.3.1.1.12 |
| hwRadioLongFrameRetryTimes A threshold standard, which judges whether a frame need to retry to send or discard, gives an utmost times to retry to
send a long frame packet from the MAC layer. A long frame m… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.3.1.1.13 |
| hwRadioSupportShortPreamble A switch flag, which set the short preamble status as enable or disable, tells whether the short preamble is supported by the radio.
Enable means the radio supports short preamble… | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.1.1.14 |
| hwRadioBeaconInterval An interval uses to specify the number of TUs that a station should use for scheduling Beacon
transmissions. This value is transmitted in Beacon and Probe Response frames.
The u… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.3.1.1.16 |
| hwRadioWMMProfileName A human readable string representing the name of the WMM profile. WMM means WI-FI multimedia.
This is the (radio profile) model dependent WMM profile ID.
… | column | OctetString | .1.3.6.1.4.1.2011.6.139.3.1.1.17 |
| hwRadioProfileRowStatus An object is used to create or delete a radio profile.
There are some restrictions of operation of the radio profile.
- It needs a radio profile id for the creati… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.139.3.1.1.18 |
| hwRadio80211nGuardIntervalMode The mode uses to set the guard interval which is the necessary interval to receive and dispatch wireless signal to make the communication well.
Normal means it sets the normal gua… | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.1.1.19 |
| hwRadioType The radio type is supported by the radio profile.Each radio type has its corresponding radio model.
This is the (radio profile) model dependent radio profile ID.
… | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.1.1.2 |
| hwRadio80211nAMPDUMaxLengthExponent The limit length of an AMPDU frame. AMPDU is the abbreviation of aggregate MAC protocol data unit.
In order to reduce the spending of transmission, 80211n brings fo… | column | Integer32 | .1.3.6.1.4.1.2011.6.139.3.1.1.20 |
| hwRadioCalibrateEnable Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.1.1.21 |
| hwRadioInterfDetDevice Description. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.139.3.1.1.22 |
| hwRadioApComInterfThreshold Description. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.139.3.1.1.23 |
| hwRadioApAdjInterfThreshold Description. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.139.3.1.1.24 |
| hwRadioStaInterfThreshold Description. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.139.3.1.1.25 |
| hwRadioDeviceReportDuration The reporting duration of the radio device. | column | second Integer32 | .1.3.6.1.4.1.2011.6.139.3.1.1.26 |
| hwRadioRTSMode Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.1.1.27 |
| hwRadioWifiLight Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.1.1.28 |
| hwRadioBeamformingSwitch Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.1.1.29 |
| hwRadioRateMode An object, which causes the way change to the radio support rate as the given mode when it's been modified.
The meaning of the value in the enum list describe as following.
Auto m… | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.1.1.3 |
| hwRadioWidsDevSynchronizationInt Description. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.139.3.1.1.30 |
| hwRadioChannelSwitchAnnouncement Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.1.1.31 |
| hwRadioChannelSwitchMode Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.1.1.32 |
| hwRadioStaAccessSignalStrengthSwitch Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.1.1.33 |
| hwRadioStaAccessSignalStrengthThreshold Description. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.139.3.1.1.34 |
| hwRadioBackgroundListenNeighborSwitch Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.1.1.35 |
| hwRadioBackgroundScanningServiceThreshold Description. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.139.3.1.1.36 |
| hwRadioBackgroundScanningClientThreshold Description. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.139.3.1.1.37 |
| hwRadioStaAccessRateLimitSwitch Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.1.1.38 |
| hwRadioStaAccessRateLimitThreshold Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.1.1.39 |
| hwRadioRateValue The value of radio support rate, which is used together with the radio rate mode, designates the max rate of transmission by the radio profile.
While the radio rate mode is auto, … | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.1.1.4 |
| hwRadioSpectrumAnalysisScanPeriod Description. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.139.3.1.1.40 |
| hwRadioSpectrumAnalysisScanInterval Description. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.139.3.1.1.41 |
| hwRadioHighDenseSwitch 0:disable
1:enable | column | Integer32 | .1.3.6.1.4.1.2011.6.139.3.1.1.42 |
| hwRadioHighDenseMode 0:low mode
1:middle mode
2:high mode | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.139.3.1.1.43 |
| hwRadioStaOfflineSignalStrengthSwitch 0:disable
1:enable | column | Integer32 | .1.3.6.1.4.1.2011.6.139.3.1.1.44 |
| hwRadioStaOfflineSignalStrengthThreshold Description. | column | dbm Integer32 | .1.3.6.1.4.1.2011.6.139.3.1.1.45 |
| hwRadioStaOfflineRateLimitSwitch 0:disable
1:enable | column | Integer32 | .1.3.6.1.4.1.2011.6.139.3.1.1.46 |
| hwRadioStaOfflineRateThreshold Description. | column | % Integer32 | .1.3.6.1.4.1.2011.6.139.3.1.1.47 |
| hwRadioDynamicAdjustPowerSwitch 0:disable
1:enable | column | Integer32 | .1.3.6.1.4.1.2011.6.139.3.1.1.48 |
| hwRadioLocationReportTime | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.139.3.1.1.49 |
| hwRadioChannelMode The control mode of radio's channel.
Auto means radio chooses the feat channel automatically on the basis of the detectted circumambienceis of the wireless signal in itself;
Fixed… | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.1.1.5 |
| hwRadioLocationScanInterval | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.139.3.1.1.50 |
| hwRadioLocationScanPeriod | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.139.3.1.1.51 |
| hwRadioAirTimeScheduleSwitch 0:disable
1:enable | column | Integer32 | .1.3.6.1.4.1.2011.6.139.3.1.1.52 |
| hwRadioCalibrateScanCycle Description. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.3.1.1.53 |
| hwRadioUacPolicyType Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.1.1.54 |
| hwRadioUacPolicySwitch Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.1.1.55 |
| hwRadioUacAccessThreshold when uac policy type is users, the value range from 0 to 128,
when uac policy type is channel utilization, the value range from 0 to 100. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.139.3.1.1.56 |
| hwRadioUacRoamThreshold when uac policy type is users, the value range from 0 to 128,
when uac policy type is channel utilization, the value range from 0 to 100.
the value of Roam threshold is bigger tha… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.139.3.1.1.57 |
| hwRadioUacHideSSIDSwitch Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.1.1.58 |
| hwRadio80211acGuardIntervalMode The mode uses to set the guard interval which is the necessary interval to receive and dispatch wireless signal to make the communication well.
Normal means it sets the normal gua… | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.1.1.59 |
| hwRadioPowerMode The control mode of radio's power level.
Auto means radio chooses the feat power level automatically on the basis of the detectted circumambienceis of the wireless signal in itsel… | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.1.1.6 |
| hwRadio80211acAMPDUMaxLengthExponent The limit length of an AMPDU frame. AMPDU is the abbreviation of aggregate MAC protocol data unit.
In order to reduce the spending of transmission, 80211ac brings f… | column | Integer32 | .1.3.6.1.4.1.2011.6.139.3.1.1.60 |
| hwRadio80211bgBasicRateSet Description. | column | OctetString | .1.3.6.1.4.1.2011.6.139.3.1.1.61 |
| hwRadio80211bgSupportRateSet Description. | column | OctetString | .1.3.6.1.4.1.2011.6.139.3.1.1.62 |
| hwRadio80211aBasicRateSet Description. | column | OctetString | .1.3.6.1.4.1.2011.6.139.3.1.1.63 |
| hwRadio80211aSupportRateSet Description. | column | OctetString | .1.3.6.1.4.1.2011.6.139.3.1.1.64 |
| hwRadio80211nSupportMCS Description. | column | OctetString | .1.3.6.1.4.1.2011.6.139.3.1.1.65 |
| hwRadio80211acSupportMcsMapMcs Description. | column | OctetString | .1.3.6.1.4.1.2011.6.139.3.1.1.67 |
| hwRadioMulticastRate2G Description. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.3.1.1.68 |
| hwRadioMulticastRate5G Description. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.3.1.1.69 |
| hwRadioCalibrateInterval An interval uses to detect the rate of the lost signal packets and the conflicted signal packets periodically.
If it sets the interval, radio will detect the signal quality in the… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.3.1.1.7 |
| hwRadioLegacyStationEnable Allow legacy station access. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.1.1.70 |
| hwRadioLocationScanChannel2G Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.1.1.71 |
| hwRadioLocationScanChannel5G Description. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.1.1.72 |
| hwRadioAMSDUTxEnable Send with A-MSDU. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.3.1.1.73 |
| hwRadioAMSDUTxMaxSubFrames The maximum number of sub MSDUs in a A-MSDU. | column | Integer32 | .1.3.6.1.4.1.2011.6.139.3.1.1.74 |
| hwRadioPERThreshold A threshold standard, which uses the units percent ,gives an utmost rate to the lost signal packet or the error signal packet.
The range of the threshold is from 3 to 50 percent, … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.3.1.1.8 |
| hwRadioConfictRateThreshold A threshold standard, which uses the units percent ,gives an utmost rate to the conflicted signal packet.
The range of the threshold is from 20 to 80 percent, and the default conf… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.3.1.1.9 |