hwWlanRadioCalibratePolicy

HUAWEI-WLAN-CONFIGURATION-MIB · .1.3.6.1.4.1.2011.6.139.11.1.57.5
MIB view Table view

Object

scalar r/w SNMPv2-SMIUnsigned32 
This object indicates the radio calibration policy.bit0: rogue-ap bit2: nonWifi bit3: noise-floor bit1 is invalid.
The default value is 0, indicating that this function is not enabled.

Context

MIB
HUAWEI-WLAN-CONFIGURATION-MIB
OID
.1.3.6.1.4.1.2011.6.139.11.1.57.5
Type
scalar
Access
readwrite
Status
current
Parent
hwWlanRadioCalibrateManagement
Siblings
18

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwWlanRadioCalibrateMode
This object indicates the radio calibration mode. The default value is auto(1).
scalarEnumeration.1.3.6.1.4.1.2011.6.139.11.1.57.1
hwWlanRadioCalibrateManualProcess
This object indicates the radio calibration status
scalarInteger32.1.3.6.1.4.1.2011.6.139.11.1.57.10
hwWlanRadioCalibrateFlexibleRadio
This object indicates the calibration radio flexible-radio status switch. The default value is disable(1).
scalarEnumeration.1.3.6.1.4.1.2011.6.139.11.1.57.11
hwWlanRadioCalibrateFlexRadioManualRecognize
This object indicates the calibration radio flexible-radio manual recognize.
scalarEnumeration.1.3.6.1.4.1.2011.6.139.11.1.57.12
hwWlanRadioCalibrateFlexibleRadioProcess
This object indicates the calibration radio flexible-radio process.
scalarEnumeration.1.3.6.1.4.1.2011.6.139.11.1.57.13
hwWlanRadioCalibrateFlexibleRadioRecognizeTime
This object indicates the start time of flxible radio recolonization.
scalarOctetString.1.3.6.1.4.1.2011.6.139.11.1.57.14
hwWlanRadioCalibrateSensitivityCustomValue
This object indicates the custom threshold of calibrate sensitivity. It can be set when hwWlanRadioCalibrateSensitivity is custom(5). A larger value indicates lower calibration se…
scalarUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.57.15
hwWlanRadioCalibrateScheduleTimeRange
Description.
scalarOctetString.1.3.6.1.4.1.2011.6.139.11.1.57.16
hwWlanRadioCalibrateReferenceDataAnalysis
This object indicates the status of the referencing data-analysis function. The default value is 2.
scalarEnumeration.1.3.6.1.4.1.2011.6.139.11.1.57.17
hwWlanRadioCalibrateEnvironmentDeteriorateValue
This object indicates the environment deterioration threshold function. The default value is 16.
scalarUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.57.18
hwWlanRadioCalibrateReferenceRogueInter
This object indicates the status of the referencing rogue-AP-interference function. The default value is 2.
scalarEnumeration.1.3.6.1.4.1.2011.6.139.11.1.57.19
hwWlanRadioCalibrateScheduleTime
This object indicates the scheduled radio calibration time.
scalarOctetString.1.3.6.1.4.1.2011.6.139.11.1.57.2
hwWlanRadioCalibrateManualStartup
This object indicates the manually triggered radio calibration. It is valid only when the radio calibration mode is manual.
scalarInteger32.1.3.6.1.4.1.2011.6.139.11.1.57.3
hwWlanRadioCalibrateAutoInterval
This object indicates the automatic radio calibration interval. It is expressed in minutes. The default value is 1440.
scalarInteger32.1.3.6.1.4.1.2011.6.139.11.1.57.4
hwWlanRadioCalibrateSensitivity
This object indicates the radio calibration sensitivity. The default value is medium(1).
scalarEnumeration.1.3.6.1.4.1.2011.6.139.11.1.57.6
hwWlanRadioCalibrateAutoStartTime
This object indicates the start time of automatic radio calibration. The default value is 03:00:00.
scalarOctetString.1.3.6.1.4.1.2011.6.139.11.1.57.7
hwWlanRadioCalibrateManualApGroup
This object indicates the manually triggered radio calibration based on the AP group. It is valid only when the radio calibration mode is manual.
scalarOctetString.1.3.6.1.4.1.2011.6.139.11.1.57.8
hwWlanRadioCalibrateManualApList
This object indicates the manually triggered radio calibrationbased on the AP list. It is valid only when the radio calibration mode is manual.
scalarOctetString.1.3.6.1.4.1.2011.6.139.11.1.57.9