hwSecurityWepDot1xMode

HUAWEI-WLAN-CONFIGURATION-MIB · .1.3.6.1.4.1.2011.6.139.11.1.22.1.40
MIB view Table view

Object

column r/w SNMPv2-SMIUnsigned32 
This object indicates that the WEP DOT1X key mode is wep40, wep104 or wep128. bit0~bit3:key0;bit4~bit7:key1;bit8~bit11:key2;bit12~bit16:key3.0:invalid;1:wep40;2:wep104;3:wep128.

Context

MIB
HUAWEI-WLAN-CONFIGURATION-MIB
OID
.1.3.6.1.4.1.2011.6.139.11.1.22.1.40
Type
column
Access
readwrite
Status
current
Parent
hwSecurityProfileEntry
Table
hwSecurityProfileTable
Siblings
42

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwSecurityProfileName
This object indicates the name of a security profile. It is the index of the table.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.22.1.1
hwSecurityWpaEncrypt
This object indicates the WPA/WPA2/WPA3 encryption algorithm.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.22.1.10
hwSecurityWpaPskMode
This object indicates whether the WPA PSK mode is PassPhase or Hex.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.22.1.11
hwSecurityWpaPsk
This object indicates the WPA/WPA2 PSK.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.22.1.12
hwSecurityWpaPtkUpdateSwitch
This object indicates the status of WPA PTK update function. The default value is 1.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.22.1.13
hwSecurityWpaPtkUpdateInterval
This object indicates the WPA PTK update interval. The default value is 43200 seconds.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.22.1.14
hwSecurityWapiPskMode
This object indicates the WAPI PSK mode. The default value is 1. 1:pskPassphase 2:pskHex.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.22.1.15
hwSecurityWapiPsk
This object indicates the WAPI PSK.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.22.1.16
hwSecurityWapiAsuIpAddress
This object indicates the IP address of the WAPI ASU.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.6.139.11.1.22.1.17
hwSecurityWapiIssuerCertFileName
This object indicates the certificate file name of the WAPI issuer.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.22.1.18
hwSecurityWapiAsuCertFileName
This object indicate the certificate file name of the WAPI ASU.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.22.1.19
hwSecurityPolicy
This object indicates the air interface authentication policy. The default value is unConfig(from V2R20C10; The default value is open before V2R20C10).
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.22.1.2
hwSecurityWapiAcCertFileName
This object indicate the certificate file name of the WAPI AC.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.22.1.20
hwSecurityWapiAcPrvKeyFileName
This object indicates the private key file name of the WAPI AC.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.22.1.21
hwSecurityWapiIssuerPfxPassword
This object indicates the WAPI issuer certificate key.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.22.1.22
hwSecurityWapiAsuPfxPassword
This object indicates the WAPI ASU certificate key.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.22.1.23
hwSecurityWapiAcPfxPassword
This object indicates the WAPI AC certificate key.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.22.1.24
hwSecurityWapiAcPrvKeyPassword
This object indicates the key for reading the AC private key file.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.22.1.25
hwSecurityWapiCertRetransCount
This object indicates the number of retransmissions of WAPI certificate authentication packets. The default value is 3.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.22.1.26
hwSecurityWapiBkThreshold
This object indicates the WAPI BK lifetime percentage. The default value is 70.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.22.1.27
hwSecurityWapiBkLifetime
This object indicates the interval for updating the WAPI BK. The default value is 43200 seconds.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.22.1.28
hwSecurityWapiUskUpdateMethod
This object indicates the WAPI USK update mode. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.22.1.29
hwSecurityWepEncrypt
This object indicates the WEP encryption algorithm. The default value is 4369.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.22.1.3
hwSecurityWapiMskUpdateMethod
This object indicates the WAPI MSK update mode. The default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.6.139.11.1.22.1.30
hwSecurityWapiUskUpdateInterval
This object indicates the time-based interval for updating the WAPI USK. The default value is 86400 seconds.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.22.1.31
hwSecurityWapiUskUpdatePackets
This object indicates the number of packets that will trigger WAPI USK update. The default value is 10.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.22.1.32
hwSecurityWapiUskRetansCount
This object indicates the maximum number of retransmissions of a WAPI USK negotiation packet. The default value is 3.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.22.1.33
hwSecurityWapiMskUpdateInterval
This object indicates the time-based interval for updating the WAPI MSK. The default value is 86400 seconds.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.22.1.34
hwSecurityWapiMskUpdatePackets
This object indicates the number of packets that will trigger WAPI MSK update. The default value is 10.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.22.1.35
hwSecurityWapiMskRetansCount
This object indicates the maximum number of retransmissions of a WAPI MSK negotiation packet. The default value is 3.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.22.1.36
hwSecurityWapiSATimeout
This object indicates the timeout period of a WAPI-based security association (SA). The default value is 60 seconds.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.22.1.37
hwSecurityPMF
This object indicates the status of the PMF function. The default value is 1.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.22.1.38
hwSecurityProfileRowStatus
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2011.6.139.11.1.22.1.39
hwSecurityWepPskMode
This object indicates that the WEP PSK mode is PassPhase or Hex. The default value is 4369.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.22.1.4
hwSecurityOpenSsid
This object indicate the ssid name of the Open System.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.22.1.41
hwSecurityDot1xServerIp
This object indicate the dot1x authentication server IP address.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.6.139.11.1.22.1.42
hwSecurityDot1xServerPort
This object indicate the dot1x authentication server port.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.22.1.43
hwSecurityWepPsk1
This object indicates the WEP PSK1.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.22.1.5
hwSecurityWepPsk2
This object indicates the WEP PSK2.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.22.1.6
hwSecurityWepPsk3
This object indicates the WEP PSK3.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.22.1.7
hwSecurityWepPsk4
This object indicates the WEP PSK4.
columnOctetString.1.3.6.1.4.1.2011.6.139.11.1.22.1.8
hwSecurityWepDefaultKeyId
This object indicates the default key ID for WEP. The default value is 1.
columnUnsigned32.1.3.6.1.4.1.2011.6.139.11.1.22.1.9